Schneider Electric ATV12H075M2 Atv12 0.75Kw 240V 1Ph Heat Sink Tb

(No reviews yet) Write a Review
SKU:
ATV12H075M2
UPC:
3606480071072
Condition:
New
With Safety Function Safe Torque Off (Sto):
FALSE
Asynchronous Motor Control Profile:
quadratic voltage/frequency ratio || voltage/frequency ratio (V/f) || sensorless flux vector control
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Speed Range:
45311
Analogue Input Number:
1
Operating Position:
vertical +/- 10 degree
Marking:
CE
Emc Filter:
integrated
Environmental Class (During Operation):
class 3C3 according to IEC 60721-3-3 || class 3S2 according to IEC 60721-3-3
Pollution Degree:
2
With Safety Function Safely Limited Speed (Sls):
FALSE
Motor Power Kw:
0.75 kW
Continuous Output Current:
4.2 A 4 kHz
Brake Chopper Integrated:
FALSE
Insulation:
electrical between power and control
Mounting Mode:
cabinet mount
Warranty:
18 months
Transmission Rate:
9.6 kbit/s || 19.2 kbit/s || 38.4 kbit/s
Range Of Product:
Altivar 12
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Quantity Per Set:
set of 1
With Safety Function Safe Operating Stop (Sos):
FALSE
Product Certifications:
NOM || CSA || C-tick || UL || GOST || RCM || KC
Acceleration And Deceleration Ramps:
linear from 0 to 999.9 s || U || S
Protection Type:
line supply overvoltage || line supply undervoltage || overcurrent between output phases and earth || overheating protection || short-circuit between motor phases || against input phase loss in three-phase || thermal motor protection via the drive by
Analogue Output Number:
1
Height:
143 mm
With Safety Function Safe Speed Monitor (Ssm):
FALSE
Width:
72 mm
Line Current:
10.2 A 100 V heavy duty) || 8.5 A 120 V heavy duty)
Prospective Line Isc:
1 kA
Electromagnetic Emission:
radiated emissions environment 1 category C2 IEC 61800-3 2...16 kHz shielded motor cable || conducted emissions with integrated EMC filter environment 1 category C1 IEC 61800-3 2, 4, 8, 12 and 16 kHz shielded motor cable <5 m || conducted emissions w
Nominal Switching Frequency:
4 kHz
Operating Altitude:
> 3280.84...6561.68 ft (> 1000...2000 m) with current derating 1 % per 100 m || <= 3280.84 ft (1000 m) without derating
Communication Port Protocol:
Modbus
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Discrete Input Number:
4
Motor Slip Compensation:
preset in factory || adjustable
Nominal Output Current:
4.2 A
With Safety Function Safe Programmable Logic:
FALSE
Number Of Addresses:
1-247
Physical Interface:
2-wire RS 485
Switching Frequency:
2...16 kHz adjustable || 4...16 kHz with derating factor
Shock Resistance:
15 gn 11 ms IEC 60068-2-27
Vibration Resistance:
1 gn 13-200 Hz)IEC 60068-2-6 || 1.5 mm peak to peak 3-13 Hz) - drive unmounted on symmetrical DIN rail - IEC 60068-2-6
Maximum Transient Current:
6.3 A 60 s heavy duty) || 6.9 A 2 s heavy duty)
Frequency Resolution:
analog input converter A/D, 10 bits || display unit 0.1 Hz
Mercury Free:
Yes
Maximum Acceleration Under Shock Impact (During Operation):
150 m/s² at 11 ms
Ip Degree Of Protection:
IP20
Tightening Torque:
0.8 N.m
Regulation Loop:
adjustable PID regulator
[Us] Rated Supply Voltage:
200...240 V - 15...10 %
Maximum Output Frequency:
4 kHz
Speed Drive Output Frequency:
0.5-400 Hz
Supply Frequency:
50/60 Hz +/- 5 %
Net Weight:
0.8 kg
Sampling Duration:
20 ms +/- 1 ms logic input || 10 ms analogue input
Linearity Error:
+/- 0.3 % of maximum value analogue input
Time Constant:
20 ms +/- 1 ms for reference change
Relay Output Number:
1
Relative Symmetric Network Frequency Tolerance:
0.05
Maximum Horse Power Rating:
1 hp
Maximum Deflection Under Vibratory Load (During Operation):
1.5 mm at 2...13 Hz
Relative Humidity:
5-95 % without condensation IEC 60068-2-3 || 5-95 % without dripping water IEC 60068-2-3
4 Quadrant Operation Possible:
FALSE
Maximum Output Voltage:
240 V
Method Of Access:
server Modbus serial
Discrete Output Number:
2
Data Format:
8 bits, configurable odd, even or no parity
Noise Level:
0 dB
Power Dissipation In W:
natural 44.0 W
With Sft Fct Safe Stop 2 (Ss2):
FALSE
Assembly Style:
with heat sink
Braking To Standstill:
by DC injection
With Safety Function Safe Direction (Sdi):
FALSE
Product Or Component Type:
variable speed drive
With Safety Function Safely Limited Position (Slp):
FALSE
Transmission Frame:
RTU
Apparent Power:
2.0 kVA 240 V heavy duty)
Transient Overtorque:
150-170 % of nominal motor torque depending on drive rating and type of motor
With Safety Function Safe Stop 1 (Ss1):
FALSE
Ambient Air Temperature For Operation:
-10-40 °C without derating || 40-60 °C with current derating 2.2 % per °C
Standards:
UL 508C || UL 618000-5-1 || IEC 61800-5-1 || IEC 61800-3
Overvoltage Category:
class III
China Rohs Regulation:
X
Base Load Current At High Overload:
4.2 A
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Depth:
131.2 mm
With Safety Function Safe Position (Sp):
FALSE
Connector Type:
1 RJ45
Product Specific Application:
simple machine
Maximum Acceleration Under Vibrational Stress (During Operation):
10 m/s² at 13...200 Hz
Electromagnetic Compatibility:
electrical fast transient/burst immunity test level 4 IEC 61000-4-4 || electrostatic discharge immunity test level 3 IEC 61000-4-2 || immunity to conducted disturbances level 3 IEC 61000-4-6 || radiated radio-frequency electromagnetic field immunity
Network Frequency:
50-60 Hz
Communication Service:
read holding registers (03) 29 words || write single register (06) 29 words || write multiple registers (16) 27 words || read/write multiple registers (23) 4/4 words || read device identification (43)
Ambient Air Temperature For Storage:
-25-70 °C
Ambient Air Transport Temperature:
-25-70 °C
Rohs Exemption Information:
Yes
With Safety Function Safe Brake Management (Sbc/Sbt):
FALSE
Type Of Polarization:
no impedance
  • Schneider Electric ATV12H075M2 Atv12 0.75Kw 240V 1Ph Heat Sink Tb
  • Schneider Electric ATV12H075M2 Atv12 0.75Kw 240V 1Ph Heat Sink Tb
  • Schneider Electric ATV12H075M2 Atv12 0.75Kw 240V 1Ph Heat Sink Tb
$336.60

Description

Altivar Machine ATV12 is an offer of variable speed drives for commercial equipment and simple machines. It works at a rated power up to 0.75kW / 1hp and a rated voltage from 200V to 240V AC. It is designed with heatsink for normal environments and fan-cooled enclosure. It has advanced PID and catch on the fly functions, basic cabling, and easy motor control setting. Based on the needs, it can be delivered without heatsink, with embedded EMC filter, or as standard version. The Altivar 12 drive integrates as standard the Modbus communication protocol. This Altivar Machine ATV12 is designed for simple applications, in industry, commercial machines and HVAC machines such as conveyors, pumps, extractors, access barriers and treadmills. It conforms to IEC, UL and other international standards. SoMove software compatibility enables saving and transfering of configurations to spare drive, reducing maintenance downtime. It features an optimized application of power and torque for ventilation and pumping applications, this allows up to 30% energy savings.
View AllClose