Schneider Electric ATV12H075M2TQ Atv12 0.75Kw 240V 1Ph Heatsink Pack of 14

(No reviews yet) Write a Review
SKU:
ATV12H075M2TQ
UPC:
3.60648E+12
Condition:
New
Asynchronous Motor Control Profile:
quadratic voltage/frequency ratio || voltage/frequency ratio (V/f) || sensorless flux vector control
Apparent Power:
2.0 kVA 240 V heavy duty)
Maximum Output Voltage:
240 V
Transient Overtorque:
150-170 % of nominal motor torque depending on drive rating and type of motor
Ambient Air Transport Temperature:
-25-70 °C
Linearity Error:
+/- 0.3 % of maximum value analogue input
With Safety Function Safe Speed Monitor (Ssm):
FALSE
With Safety Function Safe Torque Off (Sto):
FALSE
Motor Slip Compensation:
preset in factory || adjustable
Physical Interface:
2-wire RS 485
With Sft Fct Safe Stop 2 (Ss2):
FALSE
Mounting Mode:
cabinet mount
Time Constant:
20 ms +/- 1 ms for reference change
Speed Drive Output Frequency:
0.5-400 Hz
Transmission Frame:
RTU
With Safety Function Safe Brake Management (Sbc/Sbt):
FALSE
Product Or Component Type:
variable speed drive
Relative Symmetric Network Frequency Tolerance:
0.05
Emc Filter:
integrated
Environmental Class (During Operation):
class 3C3 according to IEC 60721-3-3 || class 3S2 according to IEC 60721-3-3
Operating Position:
vertical +/- 10 degree
Ambient Air Temperature For Storage:
-25-70 °C
Electromagnetic Emission:
radiated emissions environment 1 category C2 IEC 61800-3 2...16 kHz shielded motor cable || conducted emissions with integrated EMC filter environment 1 category C1 IEC 61800-3 2, 4, 8, 12 and 16 kHz shielded motor cable <5 m || conducted emissions w
Range Of Product:
Altivar 12
Shock Resistance:
15 gn 11 ms IEC 60068-2-27
Braking To Standstill:
by DC injection
Maximum Horse Power Rating:
1 hp
Protection Type:
line supply overvoltage || line supply undervoltage || overcurrent between output phases and earth || overheating protection || short-circuit between motor phases || against input phase loss in three-phase || thermal motor protection via the drive by
Maximum Transient Current:
6.3 A 60 s heavy duty) || 6.9 A 2 s heavy duty)
Maximum Output Frequency:
4 kHz
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Acceleration And Deceleration Ramps:
U || linear from 0 to 999.9 s || S
Number Of Addresses:
1-247
Communication Service:
read holding registers (03) 29 words || write single register (06) 29 words || write multiple registers (16) 27 words || read/write multiple registers (23) 4/4 words || read device identification (43)
China Rohs Regulation:
X
Tightening Torque:
0.8 N.m
Standards:
UL 508C || UL 618000-5-1 || IEC 61800-5-1 || IEC 61800-3
Maximum Deflection Under Vibratory Load (During Operation):
1.5 mm at 2...13 Hz
Depth:
131.2 mm
Type Of Polarization:
no impedance
Speed Range:
45311
Nominal Output Current:
4.2 A
Analogue Output Number:
1
Line Current:
10.2 A 100 V heavy duty) || 8.5 A 120 V heavy duty)
Discrete Output Number:
2
Maximum Acceleration Under Vibrational Stress (During Operation):
10 m/s² at 13...200 Hz
Pollution Degree:
2
With Safety Function Safe Direction (Sdi):
FALSE
Communication Port Protocol:
Modbus
Continuous Output Current:
4.2 A 4 kHz
Base Load Current At High Overload:
4.2 A
Width:
72 mm
Mercury Free:
Yes
Vibration Resistance:
1 gn 13-200 Hz)IEC 60068-2-6 || 1.5 mm peak to peak 3-13 Hz) - drive unmounted on symmetrical DIN rail - IEC 60068-2-6
With Safety Function Safe Stop 1 (Ss1):
FALSE
Network Frequency:
50-60 Hz
Maximum Acceleration Under Shock Impact (During Operation):
150 m/s² at 11 ms
Product Specific Application:
simple machine
Warranty:
18 months
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Quantity Per Set:
set of 14
With Safety Function Safe Operating Stop (Sos):
FALSE
Assembly Style:
with heat sink
Nominal Switching Frequency:
4 kHz
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Product Certifications:
NOM || CSA || C-tick || UL || GOST || RCM || KC
Brake Chopper Integrated:
FALSE
Electromagnetic Compatibility:
electrical fast transient/burst immunity test level 4 IEC 61000-4-4 || electrostatic discharge immunity test level 3 IEC 61000-4-2 || immunity to conducted disturbances level 3 IEC 61000-4-6 || radiated radio-frequency electromagnetic field immunity
With Safety Function Safe Programmable Logic:
FALSE
Operating Altitude:
> 3280.84...6561.68 ft (> 1000...2000 m) with current derating 1 % per 100 m || <= 3280.84 ft (1000 m) without derating
Switching Frequency:
2...16 kHz adjustable || 4...16 kHz with derating factor
Analogue Input Number:
1
Ambient Air Temperature For Operation:
-10-40 °C without derating || 40-60 °C with current derating 2.2 % per °C
Sampling Duration:
20 ms +/- 1 ms logic input || 10 ms analogue input
With Safety Function Safely Limited Position (Slp):
FALSE
Overvoltage Category:
class III
Ip Degree Of Protection:
IP20
Noise Level:
0 dB
Supply Frequency:
50/60 Hz +/- 5 %
Marking:
CE
Net Weight:
0.8 kg
4 Quadrant Operation Possible:
FALSE
Motor Power Kw:
0.75 kW
Frequency Resolution:
analog input converter A/D, 10 bits || display unit 0.1 Hz
With Safety Function Safe Position (Sp):
FALSE
Data Format:
8 bits, configurable odd, even or no parity
Method Of Access:
server Modbus serial
Relative Humidity:
5-95 % without condensation IEC 60068-2-3 || 5-95 % without dripping water IEC 60068-2-3
Discrete Input Number:
4
Power Dissipation In W:
natural 44.0 W
With Safety Function Safely Limited Speed (Sls):
FALSE
Prospective Line Isc:
1 kA
[Us] Rated Supply Voltage:
200...240 V - 15...10 %
Insulation:
electrical between power and control
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Connector Type:
1 RJ45
Relay Output Number:
1
Height:
130 mm
Regulation Loop:
adjustable PID regulator
Rohs Exemption Information:
Yes
Transmission Rate:
9.6 kbit/s || 19.2 kbit/s || 38.4 kbit/s
  • Schneider Electric ATV12H075M2TQ Atv12 0.75Kw 240V 1Ph Heatsink Pack of 14
  • Schneider Electric ATV12H075M2TQ Atv12 0.75Kw 240V 1Ph Heatsink Pack of 14
$4,712.40

Description

Altivar Machine ATV12 is an offer of variable speed drives for commercial equipment and simple machines. It works at a rated power up to 0.75kW / 1hp and a rated voltage from 200V to 240V AC. It is designed with heatsink for normal environments and fan-cooled enclosure. It has advanced PID and catch on the fly functions, basic cabling, and easy motor control setting. Based on the needs, it can be delivered without heatsink, with embedded EMC filter, or as standard version. The Altivar 12 drive integrates as standard the Modbus communication protocol. This Altivar Machine ATV12 is designed for simple applications, in industry, commercial machines and HVAC machines such as conveyors, pumps, extractors, access barriers and treadmills. It conforms to IEC, UL and other international standards. SoMove software compatibility enables saving and transfering of configurations to spare drive, reducing maintenance downtime. It is sold in lot of 14. It features an optimized application of power and torque for ventilation and pumping applications, this allows up to 30% energy savings. The ATV12 range meets basic machine requirements united with simplicity.
View AllClose