Schneider Electric ATV12HU15M2TQ Atv12 1.5Kw 240V 1Ph Heat Sink Tb Pack of 7

(No reviews yet) Write a Review
SKU:
ATV12HU15M2TQ
UPC:
3606480076602
Condition:
New
With Safety Function Safe Stop 1 (Ss1):
FALSE
Depth:
156.2 mm
Relative Humidity:
5-95 % without condensation IEC 60068-2-3 || 5-95 % without dripping water IEC 60068-2-3
Regulation Loop:
adjustable PID regulator
Nominal Switching Frequency:
4 kHz
4 Quadrant Operation Possible:
FALSE
Tightening Torque:
1.2 N.m
Acceleration And Deceleration Ramps:
linear from 0 to 999.9 s || S || U
Shock Resistance:
15 gn 11 ms IEC 60068-2-27
Width:
105 mm
Supply Frequency:
50/60 Hz +/- 5 %
Mounting Mode:
cabinet mount
Environmental Class (During Operation):
class 3C3 according to IEC 60721-3-3 || class 3S2 according to IEC 60721-3-3
Height:
142 mm
With Safety Function Safe Operating Stop (Sos):
FALSE
Relay Output Number:
1
Operating Position:
vertical +/- 10 degree
Method Of Access:
server Modbus serial
Noise Level:
45 dB
Assembly Style:
with heat sink
With Safety Function Safely Limited Speed (Sls):
FALSE
With Safety Function Safe Speed Monitor (Ssm):
FALSE
Pollution Degree:
2
Apparent Power:
3.6 kVA 240 V heavy duty)
Communication Service:
read holding registers (03) 29 words || write single register (06) 29 words || write multiple registers (16) 27 words || read/write multiple registers (23) 4/4 words || read device identification (43)
Line Current:
17.8 A 100 V heavy duty) || 14.9 A 120 V heavy duty)
Vibration Resistance:
1 gn 13-200 Hz)IEC 60068-2-6 || 1.5 mm peak to peak 3-13 Hz) - drive unmounted on symmetrical DIN rail - IEC 60068-2-6
Connector Type:
1 RJ45
Discrete Output Number:
2
Analogue Input Number:
1
Base Load Current At High Overload:
7.5 A
With Safety Function Safe Position (Sp):
FALSE
Analogue Output Number:
1
Data Format:
8 bits, configurable odd, even or no parity
Maximum Output Voltage:
240 V
Asynchronous Motor Control Profile:
sensorless flux vector control || voltage/frequency ratio (V/f) || quadratic voltage/frequency ratio
Motor Slip Compensation:
adjustable || preset in factory
Marking:
CE
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Sampling Duration:
20 ms +/- 1 ms logic input || 10 ms analogue input
Maximum Acceleration Under Shock Impact (During Operation):
150 m/s² at 11 ms
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Type Of Polarization:
no impedance
Number Of Addresses:
1-247
Time Constant:
20 ms +/- 1 ms for reference change
Maximum Horse Power Rating:
2 hp
Ambient Air Temperature For Operation:
-10-50 °C without derating || 50-60 °C with current derating 2.2 % per °C
Volume Of Cooling Air:
16 m3/h
Quantity Per Set:
set of 7
With Safety Function Safe Programmable Logic:
FALSE
Range Of Product:
Altivar 12
Overvoltage Category:
class III
With Safety Function Safe Direction (Sdi):
FALSE
Electromagnetic Emission:
radiated emissions environment 1 category C2 IEC 61800-3 2...16 kHz shielded motor cable || conducted emissions with integrated EMC filter environment 1 category C1 IEC 61800-3 2, 4, 8, 12 and 16 kHz shielded motor cable <5 m || conducted emissions w
Maximum Output Frequency:
4 kHz
Speed Drive Output Frequency:
0.5-400 Hz
Warranty:
18 months
Transmission Rate:
9.6 kbit/s || 19.2 kbit/s || 38.4 kbit/s
Speed Range:
45311
Rohs Exemption Information:
Yes
Brake Chopper Integrated:
FALSE
China Rohs Regulation:
X
Transmission Frame:
RTU
Linearity Error:
+/- 0.3 % of maximum value analogue input
Power Dissipation In W:
forced cooling 72.0 W
Braking To Standstill:
by DC injection
Network Frequency:
50-60 Hz
Motor Power Kw:
1.5 kW
Product Certifications:
NOM || CSA || C-tick || UL || GOST || RCM || KC
Operating Altitude:
> 3280.84...6561.68 ft (> 1000...2000 m) with current derating 1 % per 100 m || <= 3280.84 ft (1000 m) without derating
Net Weight:
1.4 kg
Nominal Output Current:
7.5 A
With Safety Function Safely Limited Position (Slp):
FALSE
With Safety Function Safe Brake Management (Sbc/Sbt):
FALSE
Prospective Line Isc:
1 kA
Switching Frequency:
2...16 kHz adjustable || 4...16 kHz with derating factor
Protection Type:
line supply overvoltage || line supply undervoltage || overcurrent between output phases and earth || overheating protection || short-circuit between motor phases || against input phase loss in three-phase || thermal motor protection via the drive by
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Physical Interface:
2-wire RS 485
Continuous Output Current:
7.5 A 4 kHz
Electromagnetic Compatibility:
electrical fast transient/burst immunity test level 4 IEC 61000-4-4 || electrostatic discharge immunity test level 3 IEC 61000-4-2 || immunity to conducted disturbances level 3 IEC 61000-4-6 || radiated radio-frequency electromagnetic field immunity
Relative Symmetric Network Frequency Tolerance:
0.05
Product Or Component Type:
variable speed drive
Ip Degree Of Protection:
IP20
Maximum Acceleration Under Vibrational Stress (During Operation):
10 m/s² at 13...200 Hz
With Sft Fct Safe Stop 2 (Ss2):
FALSE
Communication Port Protocol:
Modbus
Frequency Resolution:
analog input converter A/D, 10 bits || display unit 0.1 Hz
Standards:
UL 508C || UL 618000-5-1 || IEC 61800-5-1 || IEC 61800-3
Mercury Free:
Yes
Maximum Transient Current:
11.2 A 60 s heavy duty) || 12.4 A 2 s heavy duty)
Ambient Air Transport Temperature:
-25-70 °C
Ambient Air Temperature For Storage:
-25-70 °C
Insulation:
electrical between power and control
Product Specific Application:
simple machine
Discrete Input Number:
4
Maximum Deflection Under Vibratory Load (During Operation):
1.5 mm at 2...13 Hz
With Safety Function Safe Torque Off (Sto):
FALSE
[Us] Rated Supply Voltage:
200...240 V - 15...10 %
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Transient Overtorque:
150-170 % of nominal motor torque depending on drive rating and type of motor
Emc Filter:
integrated
$3,052.35

Description

Altivar Machine ATV12 is an offer of variable speed drives for commercial equipment and simple machines. It works at a rated power up to 1.5kW / 2hp and a rated voltage from 200V to 240V AC. It is designed with heatsink for normal environments and fan-cooled enclosure. It has advanced PID and catch on the fly functions, basic cabling, and easy motor control setting. Based on the needs, it can be delivered without heatsink, with embedded EMC filter, or as standard version. The Altivar 12 drive integrates as standard the Modbus communication protocol. This Altivar Machine ATV12 is designed for simple applications, in industry, commercial machines and HVAC machines such as conveyors, pumps, extractors, access barriers and treadmills. It conforms to IEC, UL and other international standards. SoMove software compatibility enables saving and transfering of configurations to spare drive, reducing maintenance downtime. It is sold in lot of 7. It features an optimized application of power and torque for ventilation and pumping applications, this allows up to 30% energy savings. The ATV12 range meets basic machine requirements united with simplicity.
View AllClose