Schneider Electric ATV320D11N4C Atv320 Compact 11Kw - 3Ph- 380/500V

(No reviews yet) Write a Review
SKU:
ATV320D11N4C
UPC:
3606489917814
Condition:
New
With Safety Function Safe Speed Monitor (Ssm):
FALSE
Method Of Access:
slave CANopen
Sustainable Offer Status:
Green Premium product
Synchronous Motor Control Profile:
vector control without sensor
With Safety Function Safe Direction (Sdi):
FALSE
Maximum Acceleration Under Shock Impact (During Operation):
150 m/s² at 11 ms
With Safety Function Safe Brake Management (Sbc/Sbt):
FALSE
Net Weight:
6.8 kg
Width:
180 mm
Motor Power Kw:
11 kW heavy duty
With Safety Function Safe Torque Off (Sto):
TRUE
Discrete Output Type:
open collector DQ+ 0-1 kHz 30 V DC 100 mA || open collector DQ- 0-1 kHz 30 V DC 100 mA
Pollution Degree:
2
Acceleration And Deceleration Ramps:
linear || U || S || CUS || ramp switching || acceleration/deceleration ramp adaptation || acceleration/deceleration automatic stop with DC injection
Overvoltage Category:
III
Brake Chopper Integrated:
TRUE
Discrete Input Logic:
positive logic (source) || negative logic (sink)
Line Current:
36.6 A 380 V heavy duty) || 25.6 A 500 V heavy duty)
Discrete Input Number:
7
Relay Output Type:
configurable relay logic R1A 1 NO 100000 cycles || configurable relay logic R1B 1 NC 100000 cycles || configurable relay logic R1C || configurable relay logic R2A 1 NO 100000 cycles || configurable relay logic R2C
[Us] Rated Supply Voltage:
380...500 V - 15...10 %
Maximum Output Frequency:
0.599 kHz
With Sft Fct Safe Stop 2 (Ss2):
FALSE
Range Of Product:
Altivar Machine ATV320
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Product Certifications:
CE || ATEX || NOM || GOST || EAC || RCM || KC
Power Dissipation In W:
fan 370 W 380 V 4 kHz
Product Specific Application:
complex machines
Communication Port Protocol:
Modbus serial || CANopen
Option Card:
communication module, CANopen || communication module, EtherCAT || communication module, Profibus DP V1 || communication module, PROFINET || communication module, Ethernet Powerlink || communication module, EtherNet/IP || communication module, Device
Nominal Output Current:
27.7 A
Minimum Switching Current:
relay output R1A, R1B, R1C, R2A, R2C 5 mA 24 V DC
Switching Frequency:
2...16 kHz adjustable || 4...16 kHz with derating factor
Standards:
IEC 61800-5-1
Motor Slip Compensation:
automatic whatever the load || adjustable 0...300 % || not available in voltage/frequency ratio (2 or 5 points)
Height:
330 mm
Speed Accuracy:
+/- 10 % of nominal slip 0.2 Tn to Tn
With Safety Function Safe Stop 1 (Ss1):
TRUE
Environmental Class (During Operation):
class 3C3 according to IEC 60721-3-3 || class 3S2 according to IEC 60721-3-3
Rohs Exemption Information:
Yes
With Safety Function Safely Limited Position (Slp):
FALSE
With Safety Function Safe Position (Sp):
FALSE
Analogue Input Type:
AI1 voltage 0...10 V DC 30 kOhm 10 bits || AI2 bipolar differential voltage +/- 10 V DC 30 kOhm 10 bits || AI3 current 0...20 mA (or 4-20 mA, x-20 mA, 20-x mA or other patterns by configuration) 250 Ohm 10 bits
Marking:
CE || ATEX || UL || CSA || EAC || RCM
With Safety Function Safely Limited Speed (Sls):
TRUE
Mounting Mode:
wall mount
Transient Overtorque:
170-200 % of nominal motor torque
Format Of The Drive:
compact
Maximum Acceleration Under Vibrational Stress (During Operation):
10 m/s² at 13...200 Hz
Permitted Relative Humidity (During Operation):
class 3K5 according to EN 60721-3
Analogue Input Number:
3
Product Or Component Type:
variable speed drive
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Apparent Power:
22.2 kVA 500 V heavy duty)
Ambient Air Temperature For Operation:
-10-50 °C without derating || 50-60 °C with derating factor
Asynchronous Motor Control Profile:
voltage/frequency ratio, 5 points || flux vector control without sensor, standard || voltage/frequency ratio - Energy Saving, quadratic U/f || flux vector control without sensor - Energy Saving || voltage/frequency ratio, 2 points
Upgradeability:
Upgraded components available
Prospective Line Isc:
22 kA
Ambient Air Temperature For Storage:
-25-70 °C
Relative Symmetric Network Frequency Tolerance:
0.05
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Electromagnetic Compatibility:
electrostatic discharge immunity test level 3 IEC 61000-4-2 || radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3 || electrical fast transient/burst immunity test level 4 IEC 61000-4-4 || 1.2/50 µs - 8/20 µs surge immu
Mercury Free:
Yes
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Analogue Output Number:
1
4 Quadrant Operation Possible:
TRUE
Depth:
198.0 mm
Protection Type:
input phase breaks drive || overcurrent between output phases and earth drive || overheating protection drive || short-circuit between motor phases drive || thermal protection drive
Circularity Profile:
ENVEOLI2311022
Volume Of Cooling Air:
156.0 m3/h
China Rohs Regulation:
X
Analogue Output Type:
software-configurable current AQ1 0...20 mA 800 Ohm 10 bits || software-configurable voltage AQ1 0...10 V DC 470 Ohm 10 bits
With Safety Function Safe Operating Stop (Sos):
FALSE
Base Load Current At High Overload:
27.7 A
Braking To Standstill:
by DC injection
Operating Position:
vertical +/- 10 degree
Discrete Output Number:
3
Discrete Input Type:
STO safe torque off, 24 V DC1.5 kOhm || DI1...DI6 logic inputs, 24 V DC 30 V) || DI5 programmable as pulse input 0-30 kHz, 24 V DC 30 V)
Ambient Air Transport Temperature:
-25-70 °C
Ip Degree Of Protection:
IP20
Environmental Disclosure:
ENVPEP2311022
Network Frequency:
50-60 Hz
Emc Filter:
integrated
Regulation Loop:
adjustable PID regulator
With Safety Function Safe Programmable Logic:
FALSE
Maximum Output Voltage:
500 V
Maximum Deflection Under Vibratory Load (During Operation):
1.5 mm at 2...13 Hz
Nominal Switching Frequency:
4 kHz
Variant:
standard version
Maximum Switching Current:
relay output R1A, R1B, R1C resistive, cos phi = 1 3 A 250 V AC || relay output R1A, R1B, R1C resistive, cos phi = 1 3 A 30 V DC || relay output R1A, R1B, R1C, R2A, R2C inductive, cos phi = 0.4 7 ms 2 A 250 V AC || relay output R1A, R1B, R1C, R2A, R2C
$2,079.00

Description

Altivar Machine ATV320 range is an offer of variable speed drives designed for Original Equipment Manufacturers (OEMs). Its compact form factor allows vertical stacking of drives inside machine frames It works at a rated power up to 11kW / 15hp and a rated voltage from 380V to 500V AC. Its robust design with IEC 60721-3-3 class 3C3 coated printed circuit boards allows to extend machine availability in harsh environmental conditions, for example at ambient temperatures of up to 60°C without the need of additional cooling. It incorporates functions suitable for the most common applications, including torque and speed accuracy at very low speed, high dynamic performance with flux vector control without sensor and extended frequency range for high-speed motors. It also incorporates parallel connection of motors and special drives using the voltage/frequency ratio and static speed accuracy and energy saving for open-loop synchronous motors. It weighs 6.8kg and its dimensions are 180mm wide, 330mm high, 192mm deep. Altivar Machine ATV320 meets simple and advanced application requirements covered for packaging, material handling, textile, material working, mechanical actuators and hoisting. It conforms to IEC, UL, TUV, KC and other international standards. Mounting accessories and external options (braking resistors, line chokes, motor chokes, additional EMC filters) are available with Altivar Machine ATV320 drives. The type of external accessories and options depends on the drive rating. The product is delivered in two packages. It is designed to be mounted in vertical position on a panel, thanks to 4 fixing holes. It is fully integrated inside Schneider Electric’s EcoStruxure Machine through DTM. It is possible to configure, control, and diagnose ATV320 drives directly in SoMachine and SoMove software by means of the same software brick (DTM).
View AllClose