Schneider Electric ATV320U04N4B Atv320 Book 0.37Kw - 3Ph - 380/500V
Schneider Electric
$577.50
(No reviews yet)
Write a Review
Write a Review
Schneider Electric
Schneider Electric ATV320U04N4B Atv320 Book 0.37Kw - 3Ph - 380/500V
This Altivar 320 variable speed drive can feed 3-phase synchronous and asynchronous motors. Its book form factor allows for a simple and compact installation in your automation cabinets. It works at a rated power up to 0.37kW / 0.5hp and a rated voltage from 380V to 500V AC. Its robust design with IEC 60721-3-3 class 3C3 coated printed circuit boards allows to extend machine availability in harsh environmental conditions, for example at ambient temperatures of up to 60°C without the need of additional cooling. It incorporates functions suitable for the most common applications, including torque and speed accuracy at very low speed, high dynamic performance with flux vector control without sensor and extended frequency range for high-speed motors. It also incorporates parallel connection of motors and special drives using the voltage/frequency ratio and static speed accuracy and energy saving for open-loop synchronous motors. The drive software includes 5 safety functions that help machines meet safety requirements, whether or not they are used in conjunction with a Preventa safety module. These safety functions are configured using SoMove software. Altivar Machine ATV320 was designed for Original Equipment Manufacturers (OEMs) that meets simple and advanced application requirements covered for packaging, material handling, textile, material working, mechanical actuators and hoisting. It conforms to international standards IEC/EN 61800-5-1 and IEC/EN 61800-3 (immunity and conducted and radiated EMC emissions). It is also CE, UL, CSA, NOM, EAC and RCM certified. Mounting accessories and external options (braking resistors, line chokes, motor chokes, additional EMC filters) are available with Altivar Machine ATV320 drives. The type of external accessories and options depends on the drive rating. It is designed to be mounted in vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. It is fully integrated inside Schneider Electric’s EcoStruxure Machine through DTM. It is possible to configure, control, and diagnose ATV320 drives directly in SoMachine and SoMove software by means of the same software brick (DTM).
- Volume Of Cooling Air:
- 9.4 m3/h
- Network Frequency:
- 50-60 Hz
- Height:
- 325.0 mm
- Width:
- 45.0 mm
- Ambient Air Temperature For Operation:
- -10-50 °C without derating || 50-60 °C with derating factor
- Standards:
- IEC 61800-5-1
- Range Of Product:
- Altivar Machine ATV320
- Motor Slip Compensation:
- automatic whatever the load || adjustable 0...300 % || not available in voltage/frequency ratio (2 or 5 points)
- Marking:
- CE || ATEX || UL || CSA || EAC || RCM
- With Safety Function Safe Stop 1 (Ss1):
- TRUE
- Power Dissipation In W:
- fan 23.0 W 380 V 4 kHz
- Mercury Free:
- Yes
- Discrete Output Type:
- open collector DQ+ 0-1 kHz 30 V DC 100 mA || open collector DQ- 0-1 kHz 30 V DC 100 mA
- Transient Overtorque:
- 170-200 % of nominal motor torque
- Ambient Air Temperature For Storage:
- -25-70 °C
- Product Certifications:
- CE || ATEX || NOM || GOST || EAC || RCM || KC
- With Sft Fct Safe Stop 2 (Ss2):
- FALSE
- Overvoltage Category:
- III
- Permitted Relative Humidity (During Operation):
- class 3K5 according to EN 60721-3
- Method Of Access:
- slave CANopen
- Minimum Switching Current:
- relay output R1A, R1B, R1C, R2A, R2C 5 mA 24 V DC
- With Safety Function Safe Torque Off (Sto):
- TRUE
- Prospective Line Isc:
- 5 kA
- Ip Degree Of Protection:
- IP20
- With Safety Function Safe Operating Stop (Sos):
- FALSE
- With Safety Function Safe Direction (Sdi):
- FALSE
- Discrete Input Type:
- STO safe torque off, 24 V DC1.5 kOhm || DI1...DI6 logic inputs, 24 V DC 30 V) || DI5 programmable as pulse input 0-30 kHz, 24 V DC 30 V)
- Relay Output Type:
- configurable relay logic R1A 1 NO 100000 cycles || configurable relay logic R1B 1 NC 100000 cycles || configurable relay logic R1C || configurable relay logic R2A 1 NO 100000 cycles || configurable relay logic R2C
- Sustainable Offer Status:
- Green Premium product
- Switching Frequency:
- 2...16 kHz adjustable || 4...16 kHz with derating factor
- Brake Chopper Integrated:
- TRUE
- Braking To Standstill:
- by DC injection
- Maximum Acceleration Under Vibrational Stress (During Operation):
- 10 m/s² at 13...200 Hz
- Analogue Input Type:
- AI1 voltage 0...10 V DC 30 kOhm 10 bits || AI2 bipolar differential voltage +/- 10 V DC 30 kOhm 10 bits || AI3 current 0...20 mA (or 4-20 mA, x-20 mA, 20-x mA or other patterns by configuration) 250 Ohm 10 bits
- Environmental Disclosure:
- ENVPEP1711005EN
- Pollution Degree:
- 2
- With Safety Function Safely Limited Speed (Sls):
- TRUE
- Analogue Input Number:
- 3
- [Us] Rated Supply Voltage:
- 380...500 V - 15...10 %
- Synchronous Motor Control Profile:
- vector control without sensor
- Maximum Output Voltage:
- 500 V
- Discrete Input Logic:
- positive logic (source) || negative logic (sink)
- Relative Symmetric Network Frequency Tolerance:
- 0.05
- Electromagnetic Compatibility:
- electrostatic discharge immunity test level 3 IEC 61000-4-2 || radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3 || electrical fast transient/burst immunity test level 4 IEC 61000-4-4 || 1.2/50 µs - 8/20 µs surge im
- Analogue Output Type:
- software-configurable current AQ1 0...20 mA 800 Ohm 10 bits || software-configurable voltage AQ1 0...10 V DC 470 Ohm 10 bits
- Emc Filter:
- Class C2 EMC filter integrated
- Maximum Output Frequency:
- 0.599 kHz
- Product Or Component Type:
- variable speed drive
- With Safety Function Safe Brake Management (Sbc/Sbt):
- FALSE
- Option Card:
- communication module, CANopen || communication module, EtherCAT || communication module, Profibus DP V1 || communication module, PROFINET || communication module, Ethernet Powerlink || communication module, EtherNet/IP || communication module, Device
- Maximum Deflection Under Vibratory Load (During Operation):
- 1.5 mm at 2...13 Hz
- Protection Type:
- input phase breaks drive || overcurrent between output phases and earth drive || overheating protection drive || short-circuit between motor phases drive || thermal protection drive
- With Safety Function Safe Speed Monitor (Ssm):
- FALSE
- Discrete Output Number:
- 3
- Speed Accuracy:
- +/- 10 % of nominal slip 0.2 Tn to Tn
- Acceleration And Deceleration Ramps:
- linear || U || S || CUS || ramp switching || acceleration/deceleration ramp adaptation || acceleration/deceleration automatic stop with DC injection
- With Safety Function Safely Limited Position (Slp):
- FALSE
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Base Load Current At High Overload:
- 0.166666666666667
- Depth:
- 245.0 mm
- Line Current:
- 2.1 A 380 V heavy duty) || 1.6 A 500 V heavy duty)
- Regulation Loop:
- adjustable PID regulator
- Asynchronous Motor Control Profile:
- voltage/frequency ratio, 5 points || flux vector control without sensor, standard || voltage/frequency ratio - Energy Saving, quadratic U/f || flux vector control without sensor - Energy Saving || voltage/frequency ratio, 2 points
- Ambient Air Transport Temperature:
- -25-70 °C
- Rohs Exemption Information:
- Yes
- With Safety Function Safe Position (Sp):
- FALSE
- Operating Position:
- vertical +/- 10 degree
- Apparent Power:
- 1.4 kVA 500 V heavy duty)
- Communication Port Protocol:
- Modbus serial || CANopen
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Mounting Mode:
- cabinet mount
- Upgradeability:
- Upgraded components available
- Discrete Input Number:
- 7
- Circularity Profile:
- ENVEOLI1711005EN
- Maximum Switching Current:
- relay output R1A, R1B, R1C resistive, cos phi = 1 3 A 250 V AC || relay output R1A, R1B, R1C resistive, cos phi = 1 3 A 30 V DC || relay output R1A, R1B, R1C, R2A, R2C inductive, cos phi = 0.4 7 ms 2 A 250 V AC || relay output R1A, R1B, R1C, R2A, R2C
- Nominal Output Current:
- 1.5 A
- Product Specific Application:
- complex machines
- China Rohs Regulation:
- X
- Format Of The Drive:
- book
- Maximum Acceleration Under Shock Impact (During Operation):
- 150 m/s² at 11 ms
- Variant:
- standard version
- Nominal Switching Frequency:
- 4 kHz
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Analogue Output Number:
- 1
- Environmental Class (During Operation):
- class 3C3 according to IEC 60721-3-3 || class 3S2 according to IEC 60721-3-3
- 4 Quadrant Operation Possible:
- TRUE
- With Safety Function Safe Programmable Logic:
- FALSE
- Motor Power Kw:
- 0.37 kW heavy duty
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Net Weight:
- 2.5 kg
- Brochure:
- View
- Catalog:
- View
- Datasheet:
- View
