Schneider Electric ATV320U06M2W Atv320 0,55Kw 200V 1Ph Without Vario

(No reviews yet) Write a Review
SKU:
ATV320U06M2W
UPC:
3606489548414
Condition:
New
With Safety Function Safe Operating Stop (Sos):
FALSE
Environmental Disclosure:
ENVPEP1908002EN
Environmental Class (During Operation):
class 3C3 according to IEC 60721-3-3 || class 3S2 according to IEC 60721-3-3
With Safety Function Safe Position (Sp):
FALSE
Mounting Mode:
wall mount
Communication Port Protocol:
Modbus serial || CANopen
Net Weight:
5.1 kg
Marking:
CE || ATEX || UL || CSA || EAC || RCM
Speed Accuracy:
+/- 10 % of nominal slip 0.2 Tn to Tn
Protection Type:
input phase breaks drive || overcurrent between output phases and earth drive || overheating protection drive || short-circuit between motor phases drive || thermal protection drive
With Safety Function Safe Direction (Sdi):
FALSE
With Safety Function Safe Brake Management (Sbc/Sbt):
FALSE
Brake Chopper Integrated:
TRUE
Line Current:
7.8 A 200 V heavy duty) || 6.6 A 240 V heavy duty)
Discrete Input Type:
STO safe torque off, 24 V DC1.5 kOhm || DI1...DI6 logic inputs, 24 V DC 30 V) || DI5 programmable as pulse input 0-30 kHz, 24 V DC 30 V)
Base Load Current At High Overload:
1.9 A
Variant:
standard version
Maximum Acceleration Under Vibrational Stress (During Operation):
10 m/s² at 13...200 Hz
4 Quadrant Operation Possible:
TRUE
Asynchronous Motor Control Profile:
voltage/frequency ratio, 5 points || flux vector control without sensor, standard || voltage/frequency ratio - Energy Saving, quadratic U/f || flux vector control without sensor - Energy Saving || voltage/frequency ratio, 2 points
Acceleration And Deceleration Ramps:
linear || U || S || CUS || ramp switching || acceleration/deceleration ramp adaptation || acceleration/deceleration automatic stop with DC injection
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Apparent Power:
1.6 kVA 240 V heavy duty)
Prospective Line Isc:
1 kA
Transient Overtorque:
170-200 % of nominal motor torque
Product Specific Application:
complex machines
Operating Position:
vertical +/- 10 degree
Pollution Degree:
3
Emc Filter:
Class C2 EMC filter integrated
With Safety Function Safely Limited Position (Slp):
FALSE
Option Card:
communication module, CANopen || communication module, EtherCAT || communication module, Profibus DP V1 || communication module, PROFINET || communication module, Ethernet Powerlink || communication module, EtherNet/IP || communication module, Device
Maximum Output Frequency:
0.599 kHz
Maximum Switching Current:
relay output R1A, R1B, R1C resistive, cos phi = 1 3 A 250 V AC || relay output R1A, R1B, R1C resistive, cos phi = 1 3 A 30 V DC || relay output R1A, R1B, R1C, R2A, R2C inductive, cos phi = 0.4 7 ms 2 A 250 V AC || relay output R1A, R1B, R1C, R2A, R2C
Method Of Access:
slave CANopen
Minimum Switching Current:
relay output R1A, R1B, R1C, R2A, R2C 5 mA 24 V DC
Rohs Exemption Information:
Yes
Depth:
182.0 mm
Motor Power Kw:
0.55 kW heavy duty
Synchronous Motor Control Profile:
vector control without sensor
Electromagnetic Compatibility:
electrostatic discharge immunity test level 3 IEC 61000-4-2 || radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3 || electrical fast transient/burst immunity test level 4 IEC 61000-4-4 || 1.2/50 µs - 8/20 µs surge im
With Safety Function Safe Speed Monitor (Ssm):
FALSE
Product Or Component Type:
variable speed drive
Circularity Profile:
ENVEOLI1908002EN
Ambient Air Temperature For Operation:
-10-40 °C without derating || 40-60 °C with derating factor
Width:
250 mm
Discrete Output Type:
open collector DQ+ 0-1 kHz 30 V DC 100 mA || open collector DQ- 0-1 kHz 30 V DC 100 mA
Height:
340 mm
Discrete Input Logic:
positive logic (source) || negative logic (sink)
Discrete Output Number:
3
Product Certifications:
CE || ATEX || NOM || GOST || EAC || RCM || KC
[Us] Rated Supply Voltage:
200...240 V - 15...10 %
Mercury Free:
Yes
Maximum Acceleration Under Shock Impact (During Operation):
150 m/s² at 11 ms
Ip Degree Of Protection:
IP66
Discrete Input Number:
7
Braking To Standstill:
by DC injection
Permitted Relative Humidity (During Operation):
class 3K5 according to EN 60721-3
With Safety Function Safe Programmable Logic:
FALSE
Ambient Air Temperature For Storage:
-25-70 °C
Format Of The Drive:
enclosed
Ambient Air Transport Temperature:
-25-70 °C
Analogue Input Type:
AI1 voltage 0...10 V DC 30 kOhm 10 bits || AI2 bipolar differential voltage +/- 10 V DC 30 kOhm 10 bits || AI3 current 0...20 mA (or 4-20 mA, x-20 mA, 20-x mA or other patterns by configuration) 250 Ohm 10 bits
Relative Symmetric Network Frequency Tolerance:
0.05
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Analogue Output Number:
1
Overvoltage Category:
III
China Rohs Regulation:
X
Motor Slip Compensation:
automatic whatever the load || adjustable 0...300 % || not available in voltage/frequency ratio (2 or 5 points)
With Safety Function Safe Torque Off (Sto):
TRUE
Upgradeability:
Upgraded components available
Range Of Product:
Altivar Machine ATV320
With Safety Function Safe Stop 1 (Ss1):
TRUE
Regulation Loop:
adjustable PID regulator
Sustainable Offer Status:
Green Premium product
With Sft Fct Safe Stop 2 (Ss2):
FALSE
Analogue Output Type:
software-configurable current AQ1 0...20 mA 800 Ohm 10 bits || software-configurable voltage AQ1 0...10 V DC 470 Ohm 10 bits
Nominal Switching Frequency:
4 kHz
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Power Dissipation In W:
self-cooled 33.0 W 200 V 4 kHz
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Relay Output Type:
configurable relay logic R1A 1 NO 100000 cycles || configurable relay logic R1B 1 NC 100000 cycles || configurable relay logic R1C || configurable relay logic R2A 1 NO 100000 cycles || configurable relay logic R2C
Maximum Output Voltage:
240 V
Standards:
IEC 61800-5-1
Analogue Input Number:
3
Switching Frequency:
2...16 kHz adjustable || 4...16 kHz with derating factor
Nominal Output Current:
3.7 A
With Safety Function Safely Limited Speed (Sls):
TRUE
Maximum Deflection Under Vibratory Load (During Operation):
1.5 mm at 2...13 Hz
Network Frequency:
50-60 Hz
Catalog:
View
Datasheet:
View
$619.65

Description

Altivar Machine ATV320 range is an offer of variable speed drives designed for Original Equipment Manufacturers (OEMs). This drive can feed single phase synchronous and asynchronous motors, and is enclosed for higher IP protection. It works at a rated power up to 0.55kW / 0.75hp and a rated voltage from 200V to 240V AC. Altivar high IP offers washable drives for harsh environments, if users want to clean the dust and chemical pollution outside of drives. It is delivered without fan, with embedded EMC C2 filter and it provides IP66 protection. It also incorporates parallel connection of motors and special drives using the voltage/frequency ratio and static speed accuracy and energy saving for open-loop synchronous motors. It weighs 5.1kg and its dimensions are 250mm wide, 340mm high, 182mm deep. The drive software includes 5 safety functions that help machines meet safety requirements. These safety functions are configured using SoMove software. This Altivar Machine ATV320 is designed for conveyors, carton packers, gantry cranes, woodworking, metal processing, fans, Food & Beverage industry. It conforms to IEC, UL, TUV, KC and other international standards. Mounting accessories and external options (braking resistors, line chokes, motor chokes, additional EMC filters) are available with Altivar Machine ATV320 drives. The type of external accessories and options depends on the drive rating. The product is delivered in two packages. It is designed to be mounted in vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. It is fully integrated inside Schneider Electric’s EcoStruxure Machine through DTM. It is possible to configure, control, and diagnose ATV320 drives directly in SoMachine and SoMove software by means of the same software brick (DTM).
View AllClose