Schneider Electric ATV320U06N4B Atv320 Book 0.55Kw - 3Ph - 380/500V
Schneider Electric
$624.00
(No reviews yet)
Write a Review
Write a Review
Schneider Electric
Schneider Electric ATV320U06N4B Atv320 Book 0.55Kw - 3Ph - 380/500V
This Altivar 320 variable speed drive can feed 3-phase synchronous and asynchronous motors. Its book form factor allows for a simple and compact installation in your automation cabinets. It works at a rated power up to 0.55kW / 0.75hp and a rated voltage from 380V to 500V AC. Its robust design with IEC 60721-3-3 class 3C3 coated printed circuit boards allows to extend machine availability in harsh environmental conditions, for example at ambient temperatures of up to 60°C without the need of additional cooling. It incorporates functions suitable for the most common applications, including torque and speed accuracy at very low speed, high dynamic performance with flux vector control without sensor and extended frequency range for high-speed motors. It also incorporates parallel connection of motors and special drives using the voltage/frequency ratio and static speed accuracy and energy saving for open-loop synchronous motors. The drive software includes 5 safety functions that help machines meet safety requirements, whether or not they are used in conjunction with a Preventa safety module. These safety functions are configured using SoMove software. Altivar Machine ATV320 was designed for Original Equipment Manufacturers (OEMs) that meets simple and advanced application requirements covered for packaging, material handling, textile, material working, mechanical actuators and hoisting. It conforms to international standards IEC/EN 61800-5-1 and IEC/EN 61800-3 (immunity and conducted and radiated EMC emissions). It is also CE, UL, CSA, NOM, EAC and RCM certified. Mounting accessories and external options (braking resistors, line chokes, motor chokes, additional EMC filters) are available with Altivar Machine ATV320 drives. The type of external accessories and options depends on the drive rating. It is designed to be mounted in vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. It is fully integrated inside Schneider Electric’s EcoStruxure Machine through DTM. It is possible to configure, control, and diagnose ATV320 drives directly in SoMachine and SoMove software by means of the same software brick (DTM).
- Prospective Line Isc:
- 5 kA
- Braking To Standstill:
- by DC injection
- Regulation Loop:
- adjustable PID regulator
- With Safety Function Safe Operating Stop (Sos):
- FALSE
- Discrete Output Number:
- 3
- Motor Power Kw:
- 0.55 kW heavy duty
- Analogue Output Number:
- 1
- Method Of Access:
- slave CANopen
- With Sft Fct Safe Stop 2 (Ss2):
- FALSE
- [Us] Rated Supply Voltage:
- 380...500 V - 15...10 %
- Variant:
- standard version
- Relay Output Type:
- configurable relay logic R1A 1 NO 100000 cycles || configurable relay logic R1B 1 NC 100000 cycles || configurable relay logic R1C || configurable relay logic R2A 1 NO 100000 cycles || configurable relay logic R2C
- Environmental Class (During Operation):
- class 3C3 according to IEC 60721-3-3 || class 3S2 according to IEC 60721-3-3
- Format Of The Drive:
- book
- Overvoltage Category:
- III
- Power Dissipation In W:
- fan 27.0 W 380 V 4 kHz
- Maximum Acceleration Under Vibrational Stress (During Operation):
- 10 m/s² at 13...200 Hz
- With Safety Function Safe Brake Management (Sbc/Sbt):
- FALSE
- Pollution Degree:
- 2
- Maximum Acceleration Under Shock Impact (During Operation):
- 150 m/s² at 11 ms
- With Safety Function Safe Direction (Sdi):
- FALSE
- Marking:
- CE || ATEX || UL || CSA || EAC || RCM
- Ambient Air Temperature For Operation:
- -10-50 °C without derating || 50-60 °C with derating factor
- Nominal Switching Frequency:
- 4 kHz
- Minimum Switching Current:
- relay output R1A, R1B, R1C, R2A, R2C 5 mA 24 V DC
- Upgradeability:
- Upgraded components available
- Permitted Relative Humidity (During Operation):
- class 3K5 according to EN 60721-3
- Net Weight:
- 2.5 kg
- Communication Port Protocol:
- Modbus serial || CANopen
- Relative Symmetric Network Frequency Tolerance:
- 0.05
- Emc Filter:
- Class C2 EMC filter integrated
- Mounting Mode:
- cabinet mount
- With Safety Function Safely Limited Speed (Sls):
- TRUE
- Discrete Input Number:
- 7
- Discrete Input Type:
- STO safe torque off, 24 V DC1.5 kOhm || DI1...DI6 logic inputs, 24 V DC 30 V) || DI5 programmable as pulse input 0-30 kHz, 24 V DC 30 V)
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Ambient Air Temperature For Storage:
- -25-70 °C
- With Safety Function Safe Position (Sp):
- FALSE
- Analogue Output Type:
- software-configurable current AQ1 0...20 mA 800 Ohm 10 bits || software-configurable voltage AQ1 0...10 V DC 470 Ohm 10 bits
- Synchronous Motor Control Profile:
- vector control without sensor
- Base Load Current At High Overload:
- 4.1 A
- Sustainable Offer Status:
- Green Premium product
- With Safety Function Safe Torque Off (Sto):
- TRUE
- Protection Type:
- input phase breaks drive || overcurrent between output phases and earth drive || overheating protection drive || short-circuit between motor phases drive || thermal protection drive
- Asynchronous Motor Control Profile:
- voltage/frequency ratio, 5 points || flux vector control without sensor, standard || voltage/frequency ratio - Energy Saving, quadratic U/f || flux vector control without sensor - Energy Saving || voltage/frequency ratio, 2 points
- Acceleration And Deceleration Ramps:
- linear || U || S || CUS || ramp switching || acceleration/deceleration ramp adaptation || acceleration/deceleration automatic stop with DC injection
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- With Safety Function Safe Programmable Logic:
- FALSE
- Width:
- 45.0 mm
- Height:
- 325.0 mm
- Transient Overtorque:
- 170-200 % of nominal motor torque
- Discrete Input Logic:
- positive logic (source) || negative logic (sink)
- Volume Of Cooling Air:
- 9.4 m3/h
- Circularity Profile:
- ENVEOLI1711005EN
- Option Card:
- communication module, CANopen || communication module, EtherCAT || communication module, Profibus DP V1 || communication module, PROFINET || communication module, Ethernet Powerlink || communication module, EtherNet/IP || communication module, Device
- Maximum Switching Current:
- relay output R1A, R1B, R1C resistive, cos phi = 1 3 A 250 V AC || relay output R1A, R1B, R1C resistive, cos phi = 1 3 A 30 V DC || relay output R1A, R1B, R1C, R2A, R2C inductive, cos phi = 0.4 7 ms 2 A 250 V AC || relay output R1A, R1B, R1C, R2A, R2C
- With Safety Function Safe Speed Monitor (Ssm):
- FALSE
- With Safety Function Safely Limited Position (Slp):
- FALSE
- Rohs Exemption Information:
- Yes
- With Safety Function Safe Stop 1 (Ss1):
- TRUE
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Depth:
- 245.0 mm
- Nominal Output Current:
- 1.9 A
- Electromagnetic Compatibility:
- electrostatic discharge immunity test level 3 IEC 61000-4-2 || radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3 || electrical fast transient/burst immunity test level 4 IEC 61000-4-4 || 1.2/50 µs - 8/20 µs surge im
- Ambient Air Transport Temperature:
- -25-70 °C
- Standards:
- IEC 61800-5-1
- Discrete Output Type:
- open collector DQ+ 0-1 kHz 30 V DC 100 mA || open collector DQ- 0-1 kHz 30 V DC 100 mA
- Analogue Input Number:
- 3
- Range Of Product:
- Altivar Machine ATV320
- Operating Position:
- vertical +/- 10 degree
- Product Or Component Type:
- variable speed drive
- Product Certifications:
- CE || ATEX || NOM || GOST || EAC || RCM || KC
- Brake Chopper Integrated:
- TRUE
- Switching Frequency:
- 2...16 kHz adjustable || 4...16 kHz with derating factor
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- 4 Quadrant Operation Possible:
- TRUE
- Product Specific Application:
- complex machines
- Analogue Input Type:
- AI1 voltage 0...10 V DC 30 kOhm 10 bits || AI2 bipolar differential voltage +/- 10 V DC 30 kOhm 10 bits || AI3 current 0...20 mA (or 4-20 mA, x-20 mA, 20-x mA or other patterns by configuration) 250 Ohm 10 bits
- Maximum Output Voltage:
- 500 V
- Motor Slip Compensation:
- automatic whatever the load || adjustable 0...300 % || not available in voltage/frequency ratio (2 or 5 points)
- Apparent Power:
- 1.9 kVA 500 V heavy duty)
- Speed Accuracy:
- +/- 10 % of nominal slip 0.2 Tn to Tn
- Line Current:
- 2.8 A 380 V heavy duty) || 2.2 A 500 V heavy duty)
- Maximum Deflection Under Vibratory Load (During Operation):
- 1.5 mm at 2...13 Hz
- Maximum Output Frequency:
- 0.599 kHz
- Environmental Disclosure:
- ENVPEP1711005EN
- Ip Degree Of Protection:
- IP20
- Network Frequency:
- 50-60 Hz
- China Rohs Regulation:
- X
- Mercury Free:
- Yes
- Brochure:
- View
- Catalog:
- View
- Datasheet:
- View
