Schneider Electric

Schneider Electric ATV320U15M3C Atv320 1,5Kw 200V 3Ph Compact Control Va

(No reviews yet) Write a Review

Write a Review

Schneider Electric

Schneider Electric ATV320U15M3C Atv320 1,5Kw 200V 3Ph Compact Control Va

Rating Required Select Rating 1 star (worst) 2 stars 3 stars (average) 4 stars 5 stars (best)

Name

Email Required

Review Subject Required

Comments Required

SKU:

ATV320U15M3C

UPC:

3606480966637

MPN:

Condition:

New

Switching Frequency:

2...16 kHz adjustable || 4...16 kHz with derating factor

Maximum Output Frequency:

0.599 kHz

Ambient Air Transport Temperature:

-25-70 °C

Format Of The Drive:

compact

[Us] Rated Supply Voltage:

200...240 V - 15...10 %

Mercury Free:

Yes

Volume Of Cooling Air:

14.8 m3/h

Analogue Output Type:

software-configurable current AQ1 0...20 mA 800 Ohm 10 bits || software-configurable voltage AQ1 0...10 V DC 470 Ohm 10 bits

Protection Type:

input phase breaks drive || overcurrent between output phases and earth drive || overheating protection drive || short-circuit between motor phases drive || thermal protection drive

With Safety Function Safe Stop 1 (Ss1):

TRUE

Discrete Input Logic:

positive logic (source) || negative logic (sink)

Analogue Input Number:

3

Eu Rohs Directive:

Pro-active compliance (Product out of EU RoHS legal scope)

Analogue Output Number:

1

Depth:

138.0 mm

California Proposition 65:

WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Discrete Input Number:

7

Nominal Output Current:

8.0 A

Maximum Switching Current:

relay output R1A, R1B, R1C resistive, cos phi = 1 3 A 250 V AC || relay output R1A, R1B, R1C resistive, cos phi = 1 3 A 30 V DC || relay output R1A, R1B, R1C, R2A, R2C inductive, cos phi = 0.4 7 ms 2 A 250 V AC || relay output R1A, R1B, R1C, R2A, R2C

China Rohs Regulation:

X

Maximum Acceleration Under Vibrational Stress (During Operation):

10 m/s² at 13...200 Hz

Net Weight:

1.4 kg

Communication Port Protocol:

Modbus serial || CANopen

Power Dissipation In W:

fan 72.0 W 200 V 4 kHz

Motor Slip Compensation:

automatic whatever the load || adjustable 0...300 % || not available in voltage/frequency ratio (2 or 5 points)

With Sft Fct Safe Stop 2 (Ss2):

FALSE

Acceleration And Deceleration Ramps:

linear || U || S || CUS || ramp switching || acceleration/deceleration ramp adaptation || acceleration/deceleration automatic stop with DC injection

Product Certifications:

CE || ATEX || NOM || GOST || EAC || RCM || KC

Line Current:

11.1 A 200 V heavy duty) || 9.3 A 240 V heavy duty)

Network Frequency:

50-60 Hz

Maximum Output Voltage:

240 V

Discrete Output Number:

3

With Safety Function Safely Limited Position (Slp):

FALSE

Relay Output Type:

configurable relay logic R1A 1 NO 100000 cycles || configurable relay logic R1B 1 NC 100000 cycles || configurable relay logic R1C || configurable relay logic R2A 1 NO 100000 cycles || configurable relay logic R2C

Weee:

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.

Motor Power Kw:

1.5 kW heavy duty

With Safety Function Safe Programmable Logic:

FALSE

Circularity Profile:

ENVEOLI1512003EN

Discrete Output Type:

open collector DQ+ 0-1 kHz 30 V DC 100 mA || open collector DQ- 0-1 kHz 30 V DC 100 mA

With Safety Function Safe Brake Management (Sbc/Sbt):

FALSE

Option Card:

communication module, CANopen || communication module, EtherCAT || communication module, Profibus DP V1 || communication module, PROFINET || communication module, Ethernet Powerlink || communication module, EtherNet/IP || communication module, Device

Speed Accuracy:

+/- 10 % of nominal slip 0.2 Tn to Tn

Relative Symmetric Network Frequency Tolerance:

0.05

Rohs Exemption Information:

Yes

Sustainable Offer Status:

Green Premium product

Transient Overtorque:

170-200 % of nominal motor torque

Ambient Air Temperature For Operation:

-10-50 °C without derating || 50-60 °C with derating factor

Method Of Access:

slave CANopen

With Safety Function Safe Position (Sp):

FALSE

Asynchronous Motor Control Profile:

voltage/frequency ratio, 5 points || flux vector control without sensor, standard || voltage/frequency ratio - Energy Saving, quadratic U/f || flux vector control without sensor - Energy Saving || voltage/frequency ratio, 2 points

Height:

143.0 mm

Environmental Disclosure:

ENVPEP1512003EN

Marking:

CE || ATEX || UL || CSA || EAC || RCM

Product Specific Application:

complex machines

Overvoltage Category:

III

Permitted Relative Humidity (During Operation):

class 3K5 according to EN 60721-3

Braking To Standstill:

by DC injection

With Safety Function Safe Torque Off (Sto):

TRUE

Base Load Current At High Overload:

0.166666666666667

Mounting Mode:

wall mount

Emc Filter:

without EMC filter

Synchronous Motor Control Profile:

vector control without sensor

Ip Degree Of Protection:

IP20

Electromagnetic Compatibility:

electrostatic discharge immunity test level 3 IEC 61000-4-2 || radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3 || electrical fast transient/burst immunity test level 4 IEC 61000-4-4 || 1.2/50 µs - 8/20 µs surge im

4 Quadrant Operation Possible:

TRUE

Apparent Power:

3.9 kVA 240 V heavy duty)

Width:

105.0 mm

Brake Chopper Integrated:

TRUE

Prospective Line Isc:

5 kA

Pollution Degree:

2

Ambient Air Temperature For Storage:

-25-70 °C

With Safety Function Safely Limited Speed (Sls):

TRUE

With Safety Function Safe Direction (Sdi):

FALSE

Nominal Switching Frequency:

4 kHz

Maximum Acceleration Under Shock Impact (During Operation):

150 m/s² at 11 ms

Minimum Switching Current:

relay output R1A, R1B, R1C, R2A, R2C 5 mA 24 V DC

With Safety Function Safe Operating Stop (Sos):

FALSE

Range Of Product:

Altivar Machine ATV320

With Safety Function Safe Speed Monitor (Ssm):

FALSE

Environmental Class (During Operation):

class 3C3 according to IEC 60721-3-3 || class 3S2 according to IEC 60721-3-3

Upgradeability:

Upgraded components available

Variant:

standard version

Maximum Deflection Under Vibratory Load (During Operation):

1.5 mm at 2...13 Hz

Analogue Input Type:

AI1 voltage 0...10 V DC 30 kOhm 10 bits || AI2 bipolar differential voltage +/- 10 V DC 30 kOhm 10 bits || AI3 current 0...20 mA (or 4-20 mA, x-20 mA, 20-x mA or other patterns by configuration) 250 Ohm 10 bits

Discrete Input Type:

STO safe torque off, 24 V DC1.5 kOhm || DI1...DI6 logic inputs, 24 V DC 30 V) || DI5 programmable as pulse input 0-30 kHz, 24 V DC 30 V)

Operating Position:

vertical +/- 10 degree

Reach Regulation:

Reference contains Substances of Very High Concern above the threshold

Product Or Component Type:

variable speed drive

Regulation Loop:

adjustable PID regulator

Standards:

IEC 61800-5-1

Brochure:

View

Catalog:

View

Datasheet:

View