Schneider Electric

Schneider Electric ATV320U22S6C Atv320 2,2Kw 600V 3Ph Compact Control Va

(No reviews yet) Write a Review
SKU:
ATV320U22S6C
UPC:
3606480966811
Condition:
New
Motor Power Kw:
2.2 kW heavy duty
Depth:
158.0 mm
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
With Safety Function Safe Brake Management (Sbc/Sbt):
FALSE
Product Specific Application:
complex machines
Network Frequency:
50-60 Hz
Prospective Line Isc:
5 kA
Discrete Input Type:
STO safe torque off, 24 V DC1.5 kOhm || DI1...DI6 logic inputs, 24 V DC 30 V) || DI5 programmable as pulse input 0-30 kHz, 24 V DC 30 V)
With Safety Function Safe Torque Off (Sto):
TRUE
Ambient Air Temperature For Operation:
-10-50 °C without derating || 50-60 °C with derating factor
Maximum Output Frequency:
0.599 kHz
Operating Position:
vertical +/- 10 degree
Range Of Product:
Altivar Machine ATV320
Analogue Input Type:
AI1 voltage 0...10 V DC 30 kOhm 10 bits || AI2 bipolar differential voltage +/- 10 V DC 30 kOhm 10 bits || AI3 current 0...20 mA (or 4-20 mA, x-20 mA, 20-x mA or other patterns by configuration) 250 Ohm 10 bits
Upgradeability:
Upgraded components available
Base Load Current At High Overload:
2.3 A
Environmental Disclosure:
ENVPEP1512005EN
Maximum Acceleration Under Shock Impact (During Operation):
150 m/s² at 11 ms
Asynchronous Motor Control Profile:
voltage/frequency ratio, 5 points || flux vector control without sensor, standard || voltage/frequency ratio - Energy Saving, quadratic U/f || flux vector control without sensor - Energy Saving || voltage/frequency ratio, 2 points
Height:
184.0 mm
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Circularity Profile:
ENVEOLI1512005EN
Nominal Switching Frequency:
4 kHz
With Safety Function Safe Position (Sp):
FALSE
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Maximum Switching Current:
relay output R1A, R1B, R1C resistive, cos phi = 1 3 A 250 V AC || relay output R1A, R1B, R1C resistive, cos phi = 1 3 A 30 V DC || relay output R1A, R1B, R1C, R2A, R2C inductive, cos phi = 0.4 7 ms 2 A 250 V AC || relay output R1A, R1B, R1C, R2A, R2C
Discrete Input Number:
7
Option Card:
communication module, CANopen || communication module, EtherCAT || communication module, Profibus DP V1 || communication module, PROFINET || communication module, Ethernet Powerlink || communication module, EtherNet/IP || communication module, Device
Communication Port Protocol:
Modbus serial || CANopen
Analogue Output Number:
1
Ip Degree Of Protection:
IP20
Discrete Output Type:
open collector DQ+ 0-1 kHz 30 V DC 100 mA || open collector DQ- 0-1 kHz 30 V DC 100 mA
Ambient Air Temperature For Storage:
-25-70 °C
Braking To Standstill:
by DC injection
Power Dissipation In W:
fan 77.0 W 525 V 4 kHz
Protection Type:
input phase breaks drive || overcurrent between output phases and earth drive || overheating protection drive || short-circuit between motor phases drive || thermal protection drive
Format Of The Drive:
compact
Line Current:
3.7 A 525 V heavy duty) || 3.2 A 600 V heavy duty)
China Rohs Regulation:
X
Discrete Output Number:
3
Method Of Access:
slave CANopen
Rohs Exemption Information:
Yes
With Safety Function Safe Programmable Logic:
FALSE
Ambient Air Transport Temperature:
-25-70 °C
With Safety Function Safe Operating Stop (Sos):
FALSE
Analogue Input Number:
3
Relay Output Type:
configurable relay logic R1A 1 NO 100000 cycles || configurable relay logic R1B 1 NC 100000 cycles || configurable relay logic R1C || configurable relay logic R2A 1 NO 100000 cycles || configurable relay logic R2C
Electromagnetic Compatibility:
electrostatic discharge immunity test level 3 IEC 61000-4-2 || radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3 || electrical fast transient/burst immunity test level 4 IEC 61000-4-4 || 1.2/50 µs - 8/20 µs surge im
Net Weight:
2.0 kg
With Safety Function Safely Limited Speed (Sls):
TRUE
Maximum Acceleration Under Vibrational Stress (During Operation):
10 m/s² at 13...200 Hz
Acceleration And Deceleration Ramps:
linear || U || S || CUS || ramp switching || acceleration/deceleration ramp adaptation || acceleration/deceleration automatic stop with DC injection
Synchronous Motor Control Profile:
vector control without sensor
Pollution Degree:
2
Product Certifications:
CE || ATEX || NOM || GOST || EAC || RCM || KC
Permitted Relative Humidity (During Operation):
class 3K5 according to EN 60721-3
Switching Frequency:
2...16 kHz adjustable || 4...16 kHz with derating factor
Product Or Component Type:
variable speed drive
Standards:
IEC 61800-5-1
Mounting Mode:
wall mount
Nominal Output Current:
3.9 A
Motor Slip Compensation:
automatic whatever the load || adjustable 0...300 % || not available in voltage/frequency ratio (2 or 5 points)
Minimum Switching Current:
relay output R1A, R1B, R1C, R2A, R2C 5 mA 24 V DC
[Us] Rated Supply Voltage:
525...600 V - 15...10 %
With Safety Function Safely Limited Position (Slp):
FALSE
Emc Filter:
without EMC filter
Brake Chopper Integrated:
TRUE
Regulation Loop:
adjustable PID regulator
Sustainable Offer Status:
Green Premium product
Maximum Output Voltage:
600 V
Overvoltage Category:
III
With Safety Function Safe Stop 1 (Ss1):
TRUE
Relative Symmetric Network Frequency Tolerance:
0.05
Discrete Input Logic:
positive logic (source) || negative logic (sink)
Transient Overtorque:
170-200 % of nominal motor torque
Variant:
standard version
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Maximum Deflection Under Vibratory Load (During Operation):
1.5 mm at 2...13 Hz
With Sft Fct Safe Stop 2 (Ss2):
FALSE
Speed Accuracy:
+/- 10 % of nominal slip 0.2 Tn to Tn
With Safety Function Safe Speed Monitor (Ssm):
FALSE
Analogue Output Type:
software-configurable current AQ1 0...20 mA 800 Ohm 10 bits || software-configurable voltage AQ1 0...10 V DC 470 Ohm 10 bits
Width:
140 mm
Apparent Power:
3.4 kVA 600 V heavy duty)
4 Quadrant Operation Possible:
TRUE
Volume Of Cooling Air:
37.7 m3/h
Marking:
CE || ATEX || UL || CSA || EAC || RCM
Mercury Free:
Yes
Environmental Class (During Operation):
class 3C3 according to IEC 60721-3-3 || class 3S2 according to IEC 60721-3-3
With Safety Function Safe Direction (Sdi):
FALSE
Brochure:
View
Catalog:
View
Datasheet:
View
$990.00

Description

Altivar Machine ATV320 range is an offer of variable speed drives designed for Original Equipment Manufacturers (OEMs). Its compact form factor allows vertical stacking of drives inside machine frames. It works at a rated power up to 2.2kW / 3hp and a rated voltage from 525V to 600V AC. Its robust design with IEC 60721-3-3 class 3C3 coated printed circuit boards allows to extend machine availability in harsh environmental conditions, for example at ambient temperatures of up to 60°C without the need of additional cooling. It incorporates functions suitable for the most common applications, including torque and speed accuracy at very low speed, high dynamic performance with flux vector control without sensor and extended frequency range for high-speed motors. It also incorporates parallel connection of motors and special drives using the voltage/frequency ratio and static speed accuracy and energy saving for open-loop synchronous motors. It weighs 2.0kg and its dimensions are 140mm wide, 184mm high, 158mm deep. The drive software includes 5 safety functions that help machines meet safety requirements, whether or not they are used in conjunction with a Preventa safety module. These safety functions are configured using SoMove software. Altivar Machine ATV320 was designed for Original Equipment Manufacturers (OEMs) that meets simple and advanced application requirements covered for packaging, material handling, textile, material working, mechanical actuators and hoisting. It conforms to IEC, UL, TUV, KC and other international standards. Mounting accessories and external options (braking resistors, line chokes, motor chokes, additional EMC filters) are available with Altivar Machine ATV320 drives. The type of external accessories and options depends on the drive rating. The product is delivered in two packages. It is designed to be mounted in vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. It is fully integrated inside Schneider Electric’s EcoStruxure Machine through DTM. It is possible to configure, control, and diagnose ATV320 drives directly in SoMachine and SoMove software by means of the same software brick (DTM).
View AllClose