null
Schneider Electric ATV340U07N4E Atv340 0,75Kw 1Hp 400V With Ethernet Var

Schneider Electric ATV340U07N4E Atv340 0,75Kw 1Hp 400V With Ethernet Var

Schneider Electric
SKU:
ATV340U07N4E
|
UPC:
3606480966989
$1,200.60
(No reviews yet) Write a Review
Condition:
New
Current Stock:
Description
This Altivar 340 variable speed drive can feed 3-phase synchronous and asynchronous motors in open and closed loop control. Altivar Machine ATV340 drives are sized heavy duty as standard. It works at a rated power up to 0.75kW / 1hp and a rated voltage from 380V to 480V AC. ATV340 has been designed to meet the needs of applications for harsh environments, such as vibration, shock and non-conductive dust and where high temperature resistance up to 60 °C is needed. This product integrates Modbus serial line communication protocols as standard. This drive features multi-protocol Ethernet embedded, it consists of Ethernet IP and Modbus TCP communication interfaces. it weighs 1.7kg and its dimensions are, 85mm wide, 270mm high, 232.5mm deep. ATV340 incorporates functions and features suitable for the most common applications, including packaging, material handling, material working, hoisting. It conforms to international standards IEC/EN 61800-5-1 and IEC/EN 61800-3 (immunity and conducted and radiated EMC emissions), IEC 60721-3, IEC 61508, IEC 13849-1. It is also CE, UL, CSA, and TÜV certified. Accessories and options (encoder interface modules, I/O expansion modules, communication modules, braking resistors, line chokes, additional EMC filters) are available with Altivar Machine ATV340 drives, depending on the drive rating. It is designed to be mounted in vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. It is fully integrated inside Schneider Electric’s EcoStruxure Machine through DTM. It is possible to configure, control, and diagnose ATV340 drives directly in SoMachine and SoMove software by means of the same software brick (DTM).
Additional Information
Maximum Horse Power Rating:
1.5 hp normal duty || 1 hp heavy duty
With Safety Function Safe Speed Monitor (Ssm):
FALSE
Range Of Product:
Altivar Machine ATV340
Physical Interface:
2-wire RS 485
With Safety Function Safe Direction (Sdi):
FALSE
Electrical Connection:
screw terminal 1.5...4 mm² line side || screw terminal 4...6 mm² DC bus || screw terminal 1.5...4 mm² motor || screw terminal 0.2...2.5 mm² control
Analogue Input Type:
AI1 software-configurable current 0...20 mA 250 Ohm 12 bits || AI1 software-configurable temperature probe or water level sensor || AI1 software-configurable voltage 0...10 V DC 31.5 kOhm 12 bits || AI2 software-configurable voltage - 10...10 V DC 31
Protection Type:
thermal protection motor || safe torque off motor || motor phase loss motor || thermal protection drive || safe torque off drive || overheating drive || overcurrent drive || output overcurrent between motor phase and earth drive || output overcurrent
Asynchronous Motor Control Profile:
constant torque standard || variable torque standard || optimized torque mode
Electromagnetic Compatibility:
electrostatic discharge immunity test level 3 IEC 61000-4-2 || radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3 || electrical fast transient/burst immunity test level 4 IEC 61000-4-4 || 1.2/50 µs - 8/20 µs surge im
Power Dissipation In W:
natural convection 28 W 380 V 4 kHz heavy duty) || forced convection 28 W 380 V 4 kHz heavy duty) || natural convection 33 W 380 V 4 kHz normal duty) || forced convection 33 W 380 V 4 kHz normal duty)
Noise Level:
52.7 dB
Product Or Component Type:
variable speed drive
[Us] Rated Supply Voltage:
380...480 V - 15...10 %
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Brake Chopper Integrated:
TRUE
With Safety Function Safe Brake Management (Sbc/Sbt):
TRUE
Width:
85.0 mm
Data Format:
8 bits, configurable odd, even or no parity
Connector Type:
3 RJ45
Upgradeability:
Upgraded components available
Motor Power Kw:
1.1 kW normal duty || 0.75 kW heavy duty
Maximum Switching Current:
relay output R1C resistive, cos phi = 1 3 A 250 V AC || relay output R1C resistive, cos phi = 1 3 A 30 V DC || relay output R1C inductive, cos phi = 0.4 7 ms 2 A 250 V AC || relay output R1C inductive, cos phi = 0.4 7 ms 2 A 30 V DC || relay output R
Mounting Mode:
cabinet mount
Discrete Output Number:
2
Discrete Output Type:
programmable output DQ1, DQ2 30 V DC 100 mA
Transmission Rate:
4.8 kbit/s || 9.6 kbit/s || 19.2 kbit/s || 38.4 kbit/s
Type Of Polarization:
no impedance
Supply Frequency:
50...60 Hz +/- 5 %
Depth:
232.5 mm
Ambient Air Temperature For Operation:
-15-50 °C without derating vertical position) || 50-60 °C with derating factor vertical position)
Discrete Input Number:
5
Type Of Cooling:
forced convection
Relay Output Number:
2
Height:
270.0 mm
With Safety Function Safe Position (Sp):
FALSE
Pollution Degree:
2
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Output Voltage:
<= power supply voltage
Variant:
standard version
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Number Of Addresses:
1-247
Continuous Output Current:
2.2 A 4 kHz heavy duty || 2.8 A 4 kHz normal duty
Environmental Disclosure:
ENVPEP1609005EN
Maximum Output Frequency:
0.599 kHz
Ambient Air Temperature For Storage:
-40-70 °C
Permitted Relative Humidity (During Operation):
class 3K5 according to EN 60721-3
With Safety Function Safely Limited Speed (Sls):
TRUE
Analogue Input Number:
2
Transmission Frame:
RTU
Minimum Switching Current:
relay output R1B 5 mA 24 V DC || relay output R2C 5 mA 24 V DC
With Sft Fct Safe Stop 2 (Ss2):
FALSE
Method Of Access:
slave Modbus RTU || slave Modbus TCP
Product Certifications:
UL || CSA || TÜV || EAC || CTick
With Safety Function Safe Operating Stop (Sos):
FALSE
Maximum Transient Current:
3.1 A 60 s normal duty) || 3.3 A 60 s heavy duty) || 3.8 A 2 s normal duty) || 4 A 2 s heavy duty)
Discrete Input Logic:
16 preset speeds
Acceleration And Deceleration Ramps:
S, U or customized || linear adjustable separately from 0.01...9999 s
Mercury Free:
Yes
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Operating Position:
vertical +/- 10 degree
Maximum Acceleration Under Shock Impact (During Operation):
70 m/s² at 22 ms
Base Load Current At High Overload:
2.2 A
Assembly Style:
with heat sink
Emc Filter:
class C3 EMC filter integrated
Electrical Connection:
line side screw terminal 1.5...4 mm² AWG 14...AWG 12 || DC bus screw terminal 4...6 mm² AWG 12...AWG 10 || motor screw terminal 1.5...4 mm² AWG 14...AWG 12 || control screw terminal 0.2...2.5 mm² AWG 24...AWG 12
Product Specific Application:
machine
Relay Output Type:
relay outputs R1A || relay outputs R1C 100000 cycles || relay outputs R2A || relay outputs R2C 100000 cycles
Marking:
CE
Maximum Output Voltage:
480 V
With Safety Function Safe Stop 1 (Ss1):
TRUE
Analogue Output Type:
software-configurable voltage AQ1 0...10 V DC 470 Ohm 10 bits || software-configurable current AQ1 0...20 mA 500 Ohm 10 bits
Pollution Degree:
2 IEC 61800-5-1
Motor Slip Compensation:
automatic whatever the load || adjustable || not available in permanent magnet motor law || can be suppressed
Rohs Exemption Information:
Yes
Discrete Input Type:
PTI programmable as pulse input 0-30 kHz, 24 V DC 30 V) || DI1...DI5 safe torque off, 24 V DC 30 V)3.5 kOhm || programmable
Maximum Deflection Under Vibratory Load (During Operation):
1.5 mm at 2...9 Hz
4 Quadrant Operation Possible:
TRUE
Sustainable Offer Status:
Green Premium product
Regulation Loop:
adjustable PID regulator
With Safety Function Safe Torque Off (Sto):
TRUE
Nominal Output Current:
2.2 A
Communication Port Protocol:
Modbus TCP || Modbus serial || EtherNet/IP
China Rohs Regulation:
X
Volume Of Cooling Air:
18.0 m3/h
With Safety Function Safe Programmable Logic:
FALSE
Circularity Profile:
ENVEOLI1609005EN
Apparent Power:
2.2 kVA 480 V normal duty) || 2.2 kVA 480 V heavy duty)
Maximum Acceleration Under Vibrational Stress (During Operation):
5 m/s² at 9...200 Hz
Ambient Air Transport Temperature:
-40-70 °C
Braking To Standstill:
by DC injection
Switching Frequency:
2...16 kHz adjustable || 14...16 kHz with derating factor
With Safety Function Safely Limited Position (Slp):
FALSE
Overvoltage Category:
class III
Synchronous Motor Control Profile:
reluctance motor || permanent magnet motor
Line Current:
2.6 A 480 V without line choke heavy duty) || 2.6 A 380 V with external line choke normal duty) || 2.1 A 480 V with external line choke normal duty) || 1.9 A 380 V with external line choke heavy duty) || 1.6 A 480 V with external line choke heavy dut
Line Current:
2.6 A 380 V normal duty) || 2.1 A 480 V normal duty) || 3.4 A 380 V heavy duty) || 2.6 A 480 V heavy duty)
Ip Degree Of Protection:
IP20
Standards:
IEC 61800-3 || IEC 61800-5-1 || IEC 60721-3 || IEC 61508 || IEC 13849-1 || UL 618000-5-1 || UL 508C
Operating Altitude:
<= 9842.52 ft (3000 m) with current derating above 1000m
Nominal Switching Frequency:
4 kHz
Base Load Current At Low Overload:
2.8 A
Net Weight:
1.7 kg
Environmental Class (During Operation):
class 3C3 according to IEC 60721-3-3 || class 3S3 according to IEC 60721-3-3
Analogue Output Number:
2
Isolation:
between power and control terminals
Phase:
3 phase
Prospective Line Isc:
5 kA
Brochure:
View
Catalog:
View
Datasheet:
View
Related Products