Schneider Electric ATV340U22N4 Atv340 2,2Kw 3Hp 400V Wo Ethernet Variab

(No reviews yet) Write a Review

Write a Review

Schneider Electric ATV340U22N4 Atv340 2,2Kw 3Hp 400V Wo Ethernet Variab

Rating Required Select Rating 1 star (worst) 2 stars 3 stars (average) 4 stars 5 stars (best)

Name

Email Required

Review Subject Required

Comments Required

SKU:

ATV340U22N4

UPC:

3606480966897

MPN:

Condition:

New

Data Format:

8 bits, configurable odd, even or no parity

With Safety Function Safe Speed Monitor (Ssm):

FALSE

Switching Frequency:

2...16 kHz adjustable || 4...16 kHz with derating factor

Method Of Access:

slave Modbus RTU

Analogue Output Type:

software-configurable voltage AQ1 0...10 V DC 470 Ohm 10 bits || software-configurable current AQ1 0...20 mA 500 Ohm 10 bits

Ambient Air Temperature For Storage:

-40-70 °C

With Safety Function Safe Programmable Logic:

FALSE

Pollution Degree:

2 IEC 61800-5-1

Environmental Class (During Operation):

class 3C3 according to IEC 60721-3-3 || class 3S3 according to IEC 60721-3-3

California Proposition 65:

WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Type Of Cooling:

forced convection

Range Of Product:

Altivar Machine ATV340

With Safety Function Safe Stop 1 (Ss1):

TRUE

With Safety Function Safe Direction (Sdi):

FALSE

Pollution Degree:

2

Product Or Component Type:

variable speed drive

Physical Interface:

2-wire RS 485

Regulation Loop:

adjustable PID regulator

Width:

85.0 mm

[Us] Rated Supply Voltage:

380...480 V - 15...10 %

Nominal Output Current:

5.6 A

Volume Of Cooling Air:

18.0 m3/h

Operating Altitude:

<= 9842.52 ft (3000 m) with current derating above 1000m

Option Card:

communication module, Profibus DP V1 || communication module, PROFINET || communication module, DeviceNet || communication module, CANopen || communication module, EtherCAT

Maximum Horse Power Rating:

3 hp normal duty || 3 hp heavy duty

Emc Filter:

class C3 EMC filter integrated

With Safety Function Safely Limited Position (Slp):

FALSE

Product Certifications:

UL || CSA || TÜV || EAC || CTick

Electrical Connection:

screw terminal 1.5...4 mm² line side || screw terminal 4...6 mm² DC bus || screw terminal 1.5...4 mm² motor || screw terminal 0.2...2.5 mm² control

Acceleration And Deceleration Ramps:

linear adjustable separately from 0.01...9999 s || S, U or customized

Maximum Acceleration Under Shock Impact (During Operation):

70 m/s² at 22 ms

Reach Regulation:

Reference contains Substances of Very High Concern above the threshold

Minimum Switching Current:

relay output R1B 5 mA 24 V DC || relay output R2C 5 mA 24 V DC

Operating Position:

vertical +/- 10 degree

Communication Port Protocol:

Modbus serial

Braking To Standstill:

by DC injection

Motor Slip Compensation:

can be suppressed || automatic whatever the load || not available in permanent magnet motor law || adjustable

Relay Output Number:

2

Relay Output Type:

relay outputs R1A || relay outputs R1C 100000 cycles || relay outputs R2A || relay outputs R2C 100000 cycles

Upgradeability:

Upgraded components available

Maximum Output Voltage:

480 V

Maximum Output Frequency:

0.599 kHz

Maximum Acceleration Under Vibrational Stress (During Operation):

5 m/s² at 9...200 Hz

Maximum Deflection Under Vibratory Load (During Operation):

1.5 mm at 2...9 Hz

Rohs Exemption Information:

Yes

Overvoltage Category:

class III

Type Of Polarization:

no impedance

With Safety Function Safe Torque Off (Sto):

TRUE

Ambient Air Temperature For Operation:

-15-50 °C without derating vertical position) || 50-60 °C with derating factor vertical position)

Noise Level:

55.4 dB

With Safety Function Safe Position (Sp):

FALSE

Discrete Input Number:

5

Analogue Input Type:

AI1 software-configurable current 0...20 mA 250 Ohm 12 bits || AI1 software-configurable temperature probe or water level sensor || AI1 software-configurable voltage 0...10 V DC 31.5 kOhm 12 bits || AI2 software-configurable voltage - 10...10 V DC 31

Product Specific Application:

machine

Transmission Frame:

RTU

Discrete Output Number:

2

Transmission Rate:

4.8 kbit/s || 9.6 kbit/s || 19.2 kbit/s || 38.4 kbit/s

Weee:

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.

Supply Frequency:

50...60 Hz +/- 5 %

Electromagnetic Compatibility:

electrostatic discharge immunity test level 3 IEC 61000-4-2 || radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3 || electrical fast transient/burst immunity test level 4 IEC 61000-4-4 || 1.2/50 µs - 8/20 µs surge immu

Nominal Switching Frequency:

4 kHz

Line Current:

6.6 A 380 V normal duty) || 5.3 A 480 V normal duty) || 8.4 A 380 V heavy duty) || 6.6 A 480 V heavy duty)

With Safety Function Safe Operating Stop (Sos):

FALSE

Discrete Output Type:

programmable output DQ1, DQ2 30 V DC 100 mA

Ip Degree Of Protection:

IP20

Permitted Relative Humidity (During Operation):

class 3K5 according to EN 60721-3

Marking:

CE

Net Weight:

1.8 kg

Continuous Output Current:

7.2 A 4 kHz normal duty || 5.6 A 4 kHz heavy duty

With Safety Function Safe Brake Management (Sbc/Sbt):

TRUE

Electrical Connection:

line side screw terminal 1.5...4 mm² AWG 14...AWG 12 || DC bus screw terminal 4...6 mm² AWG 12...AWG 10 || motor screw terminal 1.5...4 mm² AWG 14...AWG 12 || control screw terminal 0.2...2.5 mm² AWG 24...AWG 12

China Rohs Regulation:

X

Apparent Power:

5.2 kVA 480 V normal duty) || 5.5 kVA 480 V heavy duty)

Output Voltage:

<= power supply voltage

4 Quadrant Operation Possible:

TRUE

Brake Chopper Integrated:

TRUE

Depth:

232.5 mm

Asynchronous Motor Control Profile:

constant torque standard || optimized torque mode || variable torque standard

Maximum Switching Current:

relay output R1C resistive, cos phi = 1 3 A 250 V AC || relay output R1C resistive, cos phi = 1 3 A 30 V DC || relay output R1C inductive, cos phi = 0.4 7 ms 2 A 250 V AC || relay output R1C inductive, cos phi = 0.4 7 ms 2 A 30 V DC || relay output R

Connector Type:

1 RJ45

Number Of Addresses:

1-247

Circularity Profile:

ENVEOLI1609005EN

Base Load Current At High Overload:

5.6 A

Maximum Transient Current:

7.9 A 60 s normal duty) || 9.7 A 2 s normal duty) || 10.1 A 2 s heavy duty) || 8 A 60 s heavy duty)

Analogue Input Number:

2

Mounting Mode:

cabinet mount

Height:

270.0 mm

Power Dissipation In W:

natural convection 65 W 380 V 4 kHz heavy duty) || forced convection 65 W 380 V 4 kHz heavy duty) || natural convection 80 W 380 V 4 kHz normal duty) || forced convection 80 W 380 V 4 kHz normal duty)

Ambient Air Transport Temperature:

-40-70 °C

Assembly Style:

with heat sink

With Sft Fct Safe Stop 2 (Ss2):

FALSE

Discrete Input Logic:

16 preset speeds

Line Current:

8.4 A 380 V without line choke heavy duty) || 6.6 A 480 V without line choke heavy duty) || 6.6 A 380 V with external line choke normal duty) || 5.3 A 480 V with external line choke normal duty) || 5.1 A 380 V with external line choke heavy duty) ||

Discrete Input Type:

PTI programmable as pulse input 0-30 kHz, 24 V DC 30 V) || DI1...DI5 safe torque off, 24 V DC 30 V)3.5 kOhm || programmable

Prospective Line Isc:

5 kA

Isolation:

between power and control terminals

Variant:

standard version

Standards:

IEC 61800-3 || IEC 61800-5-1 || IEC 60721-3 || IEC 61508 || IEC 13849-1 || UL 618000-5-1 || UL 508C

Motor Power Kw:

3 kW normal duty || 2.2 kW heavy duty

Sustainable Offer Status:

Green Premium product

Mercury Free:

Yes

Eu Rohs Directive:

Pro-active compliance (Product out of EU RoHS legal scope)

Phase:

3 phase

Base Load Current At Low Overload:

7.2 A

Synchronous Motor Control Profile:

reluctance motor || permanent magnet motor

With Safety Function Safely Limited Speed (Sls):

TRUE

Environmental Disclosure:

ENVPEP1609005EN

Analogue Output Number:

2

Protection Type:

thermal protection motor || safe torque off motor || motor phase loss motor || thermal protection drive || safe torque off drive || overheating drive || overcurrent drive || output overcurrent between motor phase and earth drive || output overcurrent