Schneider Electric

Schneider Electric ATV630D18N4ZU Atv630 T12 Rdy Ip20 25Hp 400V Wo Keypad

SKU:

ATV630D18N4ZU

UPC:

3606489739935

MPN:

Condition:

New

Linearity Error:

AI1, AI2, AI3 +/- 0.15 % of maximum value analog input || AO1, AO2 +/- 0.2 % analog output

Circularity Profile:

ENVEOLI2007011EN

Switching Frequency:

2...12 kHz adjustable || 4...12 kHz with derating factor

Maximum Switching Current:

relay output R1, R2, R3 resistive, cos phi = 1 3 A 250 V AC || relay output R1, R2, R3 resistive, cos phi = 1 3 A 30 V DC || relay output R1, R2, R3 inductive, cos phi = 0.4 7 ms 2 A 250 V AC || relay output R1, R2, R3 inductive, cos phi = 0.4 7 ms 2

Type Of Polarization:

no impedance

Maximum Thdi:

<48 % from 80...100 % of load IEC 61000-3-12

Line Current:

33.4 A 380 V normal duty) || 28.9 A 480 V normal duty) || 27.7 A 380 V heavy duty) || 24.4 A 480 V heavy duty)

Option Card:

slot A communication module, Profibus DP V1 || slot A communication module, PROFINET || slot A communication module, DeviceNet || slot A communication module, Modbus TCP/EtherNet/IP || slot A communication module, CANopen daisy chain RJ45 || slot A c

Motor Slip Compensation:

automatic whatever the load || adjustable || not available in permanent magnet motor law || can be suppressed

Safety Function:

STO (safe torque off) SIL 3

Mercury Free:

Yes

Sampling Duration:

2 ms +/- 0.5 ms DI1...DI4) - discrete input || 5 ms +/- 1 ms DI5, DI6) - discrete input || 5 ms +/- 0.1 ms AI1, AI2, AI3) - analog input || 10 ms +/- 1 ms AO1) - analog output

California Proposition 65:

WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Minimum Switching Current:

relay output R1, R2, R3 5 mA 24 V DC

Permissible Temporary Current Boost:

1.1 x In 60 s normal duty) || 1.5 x In 60 s heavy duty)

Transmission Rate:

10, 100 Mbits || 4800 bps, 9600 bps, 19200 bps, 38.4 Kbps

Discrete Input Type:

DI7, DI8 programmable as pulse input 0-30 kHz, 24 V DC <= 30 V)

Nominal Switching Frequency:

4 kHz

Noise Level:

59.5 dB

Product Specific Application:

process and utilities

Discrete Input Logic:

16 preset speeds

Enclosure Mounting:

with heat sink

Variant:

standard version

Weee:

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.

Apparent Power:

24 kVA 480 V normal duty) || 20.3 kVA 480 V heavy duty)

Power Range:

15-25 kW 380-440 V 3 phase || 15-25 kW 480-500 V 3 phase

Ambient Air Temperature For Operation:

-15-50 °C without derating) || 50-60 °C with derating factor)

Noise Level:

59.5 dB 86/188/EEC

Pollution Degree:

2

Output Voltage:

<= power supply voltage

Product Or Component Type:

variable speed drive

Connector Type:

RJ45 on the remote graphic terminal)Ethernet/Modbus TCP || RJ45 on the remote graphic terminal)Modbus serial

Synchronous Motor Control Profile:

permanent magnet motor || synchronous reluctance motor

Analogue Output Number:

2

Electromagnetic Compatibility:

electrostatic discharge immunity test level 3 IEC 61000-4-2 || radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3 || electrical fast transient/burst immunity test level 4 IEC 61000-4-4 || 1.2/50 µs - 8/20 µs surge im

Refresh Time:

relay output R1, R2, R3)5 ms +/- 0.5 ms)

Relay Output Type:

configurable relay logic R1 fault relay NO/NC 100000 cycles || configurable relay logic R2 sequence relay NO 100000 cycles || configurable relay logic R3 sequence relay NO 100000 cycles

Motor Power Kw:

18.5 kW normal duty) || 15 kW heavy duty)

Overvoltage Category:

III

Relative Humidity:

5-95 % without condensation IEC 60068-2-3

Rohs Exemption Information:

Yes

Relay Output Number:

3

Marking:

CE

Discrete Input Number:

8

Vibration Resistance:

1.5 mm peak to peak 2-13 Hz)IEC 60068-2-6 || 1 gn 13-200 Hz)IEC 60068-2-6

Discrete Output Number:

0

China Rohs Regulation:

X

Device Short Name:

ATV630

Supply Frequency:

50...60 Hz - 5...5 %

Maximum Transient Current:

43.1 A 60 s normal duty) || 47.6 A 60 s heavy duty)

Analogue Input Type:

AI1, AI2, AI3 software-configurable voltage 0...10 V DC 31.5 kOhm 12 bits || AI1, AI2, AI3 software-configurable current 0...20 mA 250 Ohm 12 bits || AI2 voltage analog input - 10...10 V DC 31.5 kOhm 12 bits

Exchange Mode:

half duplex, full duplex, autonegotiation Ethernet/Modbus TCP

Width:

195 mm

Upgradeability:

Upgraded components available

Continuous Output Current:

39.2 A 4 kHz normal duty || 31.7 A 4 kHz heavy duty

Assembly Style:

with heat sink

Prospective Line Isc:

50 kA

Maximum Output Frequency:

500 kHz

Environmental Disclosure:

ENVPEP2007011EN

Analogue Input Number:

3

Speed Drive Output Frequency:

0.1-500 Hz

Power Dissipation In W:

natural convection 67 W 380 V 4 kHz || forced convection 460 W 380 V 4 kHz

Input Compatibility:

DI1...DI6 discrete input level 1 PLC IEC 61131-2 || DI5, DI6 discrete input level 1 PLC IEC 65A-68 || STOA, STOB discrete input level 1 PLC IEC 61131-2

Eu Rohs Directive:

Pro-active compliance (Product out of EU RoHS legal scope)

Physical Interface:

Ethernet || 2-wire RS 485

Communication Port Protocol:

Modbus TCP || Modbus serial || Ethernet

Sustainable Offer Status:

Green Premium product

Standards:

UL 508C || IEC 61800-3 || IEC 61800-3 environment 1 category C2 || EN/IEC 61800-3 environment 2 category C3 || IEC 61800-5-1 || IEC 61000-3-12 || IEC 60721-3 || IEC 61508 || IEC 13849-1

Method Of Access:

slave Modbus TCP

Pollution Degree:

2 IEC 61800-5-1

Reach Regulation:

Reference contains Substances of Very High Concern above the threshold

Braking To Standstill:

by DC injection

Volume Of Cooling Air:

215 m3/h

[Us] Rated Supply Voltage:

380...480 V

Ip Degree Of Protection:

IP20IEC 61800-5-1 || IP20IEC 60529

Accuracy:

+/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input || +/- 1 % AO1, AO2 for a temperature variation 60 °C analog output

Analogue Output Type:

software-configurable voltage AQ1, AQ2 0...10 V DC 470 Ohm 10 bits || software-configurable current AQ1, AQ2 0...20 mA 10 bits || software-configurable current DQ-, DQ+ 30 V DC || software-configurable current DQ-, DQ+ 100 mA

Mounting Mode:

cabinet mount

Type Of Cooling:

forced convection

Electrical Connection:

control removable screw terminals 0.5...1.5 mm² AWG 20...AWG 16 || line side screw terminal 10...16 mm² AWG 8...AWG 6 || motor screw terminal 10...16 mm² AWG 8...AWG 6

Number Of Addresses:

1-247 Modbus serial

Acceleration And Deceleration Ramps:

linear adjustable separately from 0.01...9999 s

Quantity Per Set:

1

Ambient Air Temperature For Storage:

-40-70 °C

Product Certifications:

CSA || ATEX zone 2/22 || ATEX INERIS || DNV-GL || UL || TÜV

Product Destination:

asynchronous motors || synchronous motors

Depth:

225.5 mm

Frequency Resolution:

display unit 0.1 Hz || analog input 0.012/50 Hz

Isolation:

between power and control terminals

Protection Type:

thermal protection motor || safe torque off motor || motor phase break motor || thermal protection drive || safe torque off drive || overheating drive || overcurrent between output phases and earth drive || overload of output voltage drive || short-c

Supply:

external supply for digital inputs 24 V DC 19-30 V), <1.25 mA overload and short-circuit protection || internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 mA overload and short-circuit protection || internal supply for d

Height:

480 mm

Data Format:

8 bits, configurable odd, even or no parity

Regulation Loop:

adjustable PID regulator

[Us] Rated Supply Voltage:

380...480 V - 15...10 %

Shock Resistance:

15 gn 11 ms IEC 60068-2-27

Insulation Resistance:

> 1 MOhm 500 V DC for 1 minute to earth

Asynchronous Motor Control Profile:

optimized torque mode || variable torque standard || constant torque standard

Maximum Horse Power Rating:

25 hp normal duty || 20 hp heavy duty

Emc Filter:

integrated 10 m IEC 61800-3 category C2 || integrated 50 m IEC 61800-3 category C3 || with EMC plate option

Phase:

3 phase

Operating Position:

vertical +/- 10 degree

Operating Altitude:

<= 3280.84 ft (1000 m) without derating || 1000...4800 m with current derating 1 % per 100 m

Range Of Product:

Altivar Process ATV600

Discrete Input Logic:

positive logic (source) DI1...DI8), < 5 V, > 11 V || negative logic (sink) DI1...DI8), > 16 V, < 10 V

Transmission Frame:

RTU

Discrete And Process Manufacturing:

building - HVAC compressor centrifugal || food and beverage processing other application || mining mineral and metal fan || mining mineral and metal pump || oil and gas fan || water and waste water other application || building - HVAC screw compresso

Local Signalling:

for local diagnostic 3 LEDs || for embedded communication status 3 LEDs (dual colour) || for communication module status 4 LEDs (dual colour) || for presence of voltage 1 LED (red)

Net Weight:

13.6 kg

Discrete Output Type:

relay outputs R1A, R1B, R1C 250 V AC 3000 mA || relay outputs R1A, R1B, R1C 30 V DC 3000 mA || relay outputs R2A, R2C 250 V AC 5000 mA || relay outputs R2A, R2C 30 V DC 5000 mA || relay outputs R3A, R3C 250 V AC 5000 mA || relay outputs R3A, R3C 30 V

Catalog:

View

Datasheet:

View