Schneider Electric ATV630D75S6 Atv630Ip20 100Hp 600V Variable Speed Dr
SKU:
ATV630D75S6
UPC:
3606481324955
MPN:
Condition:
New
Product Certifications:
TÃV || CSA || UL
Maximum Switching Current:
relay output R1, R2, R3 resistive, cos phi = 1 3 A 250 V AC || relay output R1, R2, R3 resistive, cos phi = 1 3 A 30 V DC || relay output R1, R2, R3 inductive, cos phi = 0.4 7 ms 2 A 250 V AC || relay output R1, R2, R3 inductive, cos phi = 0.4 7 ms 2
Relay Output Number:
3
Sustainable Offer Status:
Green Premium product
Emc Filter:
without EMC filter
Phase:
3 phase
Variant:
standard version
Quantity Per Set:
1
Range Of Product:
Altivar Process ATV600
Supply Frequency:
50...60 Hz - 5...5 %
Data Format:
8 bits, configurable odd, even or no parity
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Output Voltage:
<= power supply voltage
Operating Altitude:
<= 3280.84 ft (1000 m) without derating || 1000...4800 m with current derating 1 % per 100 m
Mounting Mode:
wall mount
Physical Interface:
Ethernet || 2-wire RS 485
Type Of Cooling:
forced convection
Maximum Output Frequency:
500 kHz
Exchange Mode:
half duplex, full duplex, autonegotiation Ethernet/Modbus TCP
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Transmission Frame:
RTU
Depth:
297 mm
Method Of Access:
slave Modbus TCP
Continuous Output Current:
100 A 2.5 kHz normal duty || 83 A 2.5 kHz heavy duty
Discrete Input Type:
DI7, DI8 programmable as pulse input 0-30 kHz, 24 V DC <= 30 V)
Number Of Addresses:
1-247 Modbus serial
Product Or Component Type:
variable speed drive
Synchronous Motor Control Profile:
permanent magnet motor || synchronous reluctance motor
Ip Degree Of Protection:
IP20IEC 61800-5-1 || IP20IEC 60529
Upgradeability:
Upgraded components available
Sampling Duration:
2 ms +/- 0.5 ms DI1...DI4) - discrete input || 5 ms +/- 1 ms DI5, DI6) - discrete input || 5 ms +/- 0.1 ms AI1, AI2, AI3) - analog input || 10 ms +/- 1 ms AO1) - analog output
China Rohs Regulation:
X
Product Destination:
asynchronous motors || synchronous motors
Line Current:
89.4 A 600 V normal duty) || 70.1 A 600 V heavy duty)
Analogue Input Type:
AI1, AI2, AI3 software-configurable voltage 0...10 V DC 31.5 kOhm 12 bits || AI1, AI2, AI3 software-configurable current 0...20 mA 250 Ohm 12 bits || AI2 voltage analog input - 10...10 V DC 31.5 kOhm 12 bits
[Us] Rated Supply Voltage:
600 V - 15...10 %
[Us] Rated Supply Voltage:
600 V
Asynchronous Motor Control Profile:
variable torque standard || constant torque standard || optimized torque mode
Ambient Air Temperature For Operation:
-15-50 °C without derating) || 50-60 °C with derating factor)
Pro-active compliance (Product out of EU RoHS legal scope)
Discrete Input Logic:
16 preset speeds
Option Card:
slot A communication module, Profibus DP V1 || slot A communication module, PROFINET || slot A communication module, DeviceNet || slot A communication module, Modbus TCP/EtherNet/IP || slot A communication module, CANopen daisy chain RJ45 || slot A c
Safety Function:
STO (safe torque off) SIL 3
Degree Of Protection:
UL type 1 UL 508C
Shock Resistance:
15 gn 11 ms IEC 60068-2-27
Device Short Name:
ATV630
Operating Position:
vertical +/- 10 degree
Isolation:
between power and control terminals
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
1.1 x In 60 s normal duty) || 1.5 x In 60 s heavy duty)
Noise Level:
56 dB
Pollution Degree:
2 IEC 61800-5-1
Noise Level:
52 dB 86/188/EEC
Rohs Exemption Information:
Yes
Discrete Output Type:
relay outputs R1A, R1B, R1C 250 V AC 3000 mA || relay outputs R1A, R1B, R1C 30 V DC 3000 mA || relay outputs R2A, R2C 250 V AC 5000 mA || relay outputs R2A, R2C 30 V DC 5000 mA || relay outputs R3A, R3C 250 V AC 5000 mA || relay outputs R3A, R3C 30 V
Ambient Air Temperature For Storage:
-40-70 °C
Linearity Error:
AI1, AI2, AI3 +/- 0.15 % of maximum value analog input || AO1, AO2 +/- 0.2 % analog output
Switching Frequency:
1...4.9 kHz adjustable || 2.5...4.9 kHz with derating factor
Marking:
CE
Local Signalling:
for local diagnostic 3 LEDs || for embedded communication status 3 LEDs (dual colour) || for communication module status 4 LEDs (dual colour) || for presence of voltage 1 LED (red)
Supply:
external supply for digital inputs 24 V DC 19-30 V), <1.25 mA overload and short-circuit protection || internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 mA overload and short-circuit protection || internal supply for d
Discrete Output Number:
0
Maximum Horse Power Rating:
100 hp 600 V normal duty || 75 hp 600 V heavy duty
Environmental Disclosure:
ENVPEP1706016EN
Insulation Resistance:
> 1 MOhm 500 V DC for 1 minute to earth
Accuracy:
+/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input || +/- 1 % AO1, AO2 for a temperature variation 60 °C analog output
Discrete Input Number:
8
Analogue Output Type:
software-configurable voltage AQ1, AQ2 0...10 V DC 470 Ohm 10 bits || software-configurable current AQ1, AQ2 0...20 mA 10 bits || software-configurable current DQ-, DQ+ 30 V DC || software-configurable current DQ-, DQ+ 100 mA
Vibration Resistance:
1.5 mm peak to peak 2-13 Hz)IEC 60068-2-6 || 1 gn 13-200 Hz)IEC 60068-2-6
electrostatic discharge immunity test level 3 IEC 61000-4-2 || radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3 || electrical fast transient/burst immunity test level 4 IEC 61000-4-4 || 1.2/50 µs - 8/20 µs surge im
Mercury Free:
Yes
Braking To Standstill:
by DC injection
Protection Type:
thermal protection motor || safe torque off motor || motor phase break motor || thermal protection drive || safe torque off drive || overheating drive || overcurrent between output phases and earth drive || overload of output voltage drive || short-c
