Schneider Electric ATV650D45N4EU Atv650 Ip55 Ultype12 45Kw 60Hp 400V/480V
SKU:
ATV650D45N4EU
UPC:
3.60648E+12
MPN:
Condition:
New
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Depth:
401 mm
Electrical Connection:
line side screw terminal 35...50 mm² || motor screw terminal 35...50 mm² || control removable screw terminals 0.5...1.5 mm²
Braking To Standstill:
by DC injection
Transmission Frame:
RTU
Regulation Loop:
adjustable PID regulator
Safety Function:
STO (safe torque off) SIL 3
Emc Filter:
integrated 50 m IEC 61800-3 category C2 || integrated 150 m IEC 61800-3 category C3
Discrete Input Logic:
16 preset speeds
Linearity Error:
AO1, AO2 +/- 0.2 % analog output || AI1, AI2, AI3 +/- 0.15 % of maximum value analog input
Data Format:
8 bits, configurable odd, even or no parity
Analogue Output Type:
software-configurable voltage AQ1, AQ2 0...10 V DC 470 Ohm 10 bits || software-configurable current AQ1, AQ2 0...20 mA 10 bits || software-configurable current DQ-, DQ+ 30 V DC || software-configurable current DQ-, DQ+ 100 mA
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Prospective Line Isc:
50 kA
Rohs Exemption Information:
Yes
Vibration Resistance:
1 gn 13-200 Hz)IEC 60068-2-6 || 1.5 mm peak to peak 2-13 Hz)IEC 60068-2-6
[Us] Rated Supply Voltage:
380...480 V
Insulation Resistance:
> 1 MOhm 500 V DC for 1 minute to earth
[Us] Rated Supply Voltage:
380...480 V - 15...10 %
Mercury Free:
Yes
Noise Level:
69.7 dB
Sampling Duration:
5 ms +/- 1 ms DI5, DI6) - discrete input || 5 ms +/- 0.1 ms AI1, AI2, AI3) - analog input || 10 ms +/- 1 ms AO1) - analog output || 2 ms +/- 0.5 ms DI1...DI4) - discrete input
Speed Drive Output Frequency:
0.1-500 Hz
Upgradeability:
Upgraded components available
Local Signalling:
for embedded communication status 3 LEDs (dual colour) || for communication module status 4 LEDs (dual colour) || for presence of voltage 1 LED (red) || for local diagnostic 3 LEDs
Physical Interface:
Ethernet || 2-wire RS 485
Motor Slip Compensation:
automatic whatever the load || adjustable || can be suppressed || not available in permanent magnet motor law
Switching Frequency:
4...12 kHz with derating factor || 2...12 kHz adjustable
Supply:
internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 mA overload and short-circuit protection || internal supply for digital inputs and STO 24 V DC 21-27 V), <200 mA overload and short-circuit protection || external suppl
Quantity Per Set:
1
Acceleration And Deceleration Ramps:
linear adjustable separately from 0.01...9999 s
Analogue Output Number:
2
Shock Resistance:
15 gn 11 ms IEC 60068-2-27
Ambient Air Temperature For Operation:
40-50 °C with derating factor) || -15-40 °C without derating)
Marking:
CE
Analogue Input Type:
AI1, AI2, AI3 software-configurable voltage 0...10 V DC 31.5 kOhm 12 bits || AI1, AI2, AI3 software-configurable current 0...20 mA 250 Ohm 12 bits || AI2 voltage analog input - 10...10 V DC 31.5 kOhm 12 bits
Enclosure Mounting:
wall mounted
Protection Type:
safe torque off motor || motor phase break motor || thermal protection drive || safe torque off drive || overheating drive || overcurrent between output phases and earth drive || overload of output voltage drive || short-circuit protection drive || m
Net Weight:
50 kg
Discrete Input Type:
DI7, DI8 programmable as pulse input 0-30 kHz, 24 V DC <= 30 V)
Phase:
3 phase
Isolation:
between power and control terminals
Sustainable Offer Status:
Green Premium product
Environmental Disclosure:
ENVPEP1506001EN
Device Short Name:
ATV650
Width:
290 mm
Ip Degree Of Protection:
IP55IEC 60529 || IP55IEC 61800-5-1
Range Of Product:
Altivar Process ATV600
Frequency Resolution:
analog input 0.012/50 Hz || display unit 0.1 Hz
Noise Level:
69.7 dB 86/188/EEC
Overvoltage Category:
III
Degree Of Protection:
UL type 12 UL 508C
Communication Port Protocol:
Ethernet || Modbus serial
Type Of Polarization:
no impedance
Option Card:
slot A communication module, PROFINET || slot A communication module, DeviceNet || slot A communication module, Modbus TCP/EtherNet/IP || slot A communication module, CANopen daisy chain RJ45 || slot A communication module, CANopen SUB-D 9 || slot A
Line Current:
69.1 A 480 V normal duty) || 67.1 A 380 V heavy duty) || 59 A 480 V heavy duty) || 79.8 A 380 V normal duty)
ATEX INERIS || ATEX zone 2/22 || CSA || UL || TÃV || DNV-GL
Mounting Mode:
wall mount
Connector Type:
RJ45 on the remote graphic terminal)Modbus serial || RJ45 on the remote graphic terminal)Ethernet/Modbus TCP
Maximum Transient Current:
111.8 A 60 s heavy duty) || 96.8 A 60 s normal duty)
Synchronous Motor Control Profile:
synchronous reluctance motor || permanent magnet motor
Type Of Cooling:
forced convection
Relay Output Number:
3
Pollution Degree:
2 IEC 61800-5-1
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Refresh Time:
relay output R1, R2, R3)5 ms +/- 0.5 ms)
Output Voltage:
<= power supply voltage
Discrete Input Number:
8
Permissible Temporary Current Boost:
1.5 x In 60 s heavy duty) || 1.1 x In 60 s normal duty)
Operating Position:
vertical +/- 10 degree
Analogue Input Number:
3
Minimum Switching Current:
relay output R1, R2, R3 5 mA 24 V DC
Electromagnetic Compatibility:
radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3 || electrical fast transient/burst immunity test level 4 IEC 61000-4-4 || 1.2/50 µs - 8/20 µs surge immunity test level 3 IEC 61000-4-5 || conducted radio-frequency
Motor Power Kw:
37 kW heavy duty) || 45 kW normal duty)
Apparent Power:
49.1 kVA 480 V heavy duty) || 57.4 kVA 480 V normal duty)
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Maximum Switching Current:
relay output R1, R2, R3 resistive, cos phi = 1 3 A 30 V DC || relay output R1, R2, R3 inductive, cos phi = 0.4 7 ms 2 A 250 V AC || relay output R1, R2, R3 inductive, cos phi = 0.4 7 ms 2 A 30 V DC || relay output R1, R2, R3 resistive, cos phi = 1 3
Operating Altitude:
1000...4800 m with current derating 1 % per 100 m || <= 3280.84 ft (1000 m) without derating
Product Specific Application:
process and utilities
Product Or Component Type:
variable speed drive
Product Destination:
asynchronous motors || synchronous motors
Accuracy:
+/- 1 % AO1, AO2 for a temperature variation 60 °C analog output || +/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input
Discrete Output Type:
relay outputs R1A, R1B, R1C 250 V AC 3000 mA || relay outputs R1A, R1B, R1C 30 V DC 3000 mA || relay outputs R2A, R2C 250 V AC 5000 mA || relay outputs R2A, R2C 30 V DC 5000 mA || relay outputs R3A, R3C 250 V AC 5000 mA || relay outputs R3A, R3C 30 V
Asynchronous Motor Control Profile:
variable torque standard || constant torque standard || optimized torque mode
This Altivar Process ATV600 variable speed drive can feed 3-phase synchronous and asynchronous power motors. This variable speed drive features an integrated EMC filter with 50m and 150m cable...
This Altivar Process ATV600 variable speed drive can feed 3-phase synchronous and asynchronous power motors. This variable speed drive features an integrated EMC filter with 50m and 150m cable...
This Altivar Process ATV600 variable speed drive can feed 3-phase synchronous and asynchronous power motors. This variable speed drive features an integrated EMC filter with 50m and 150m cable...
