Schneider Electric ATV650U30N4U Atv650 Ip55 Ul Type12 3Kw 400V/480V Vari
SKU:
ATV650U30N4U
UPC:
3606480907036
MPN:
Condition:
New
Supply:
internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 mA overload and short-circuit protection || internal supply for digital inputs and STO 24 V DC 21-27 V), <200 mA overload and short-circuit protection || external suppl
Synchronous Motor Control Profile:
synchronous reluctance motor || permanent magnet motor
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Vibration Resistance:
1 gn 13-200 Hz)IEC 60068-2-6 || 1.5 mm peak to peak 2-13 Hz)IEC 60068-2-6
integrated 50 m EN/IEC 61800-3 category C2 || integrated 150 m EN/IEC 61800-3 category C3
Ambient Air Temperature For Storage:
-40-70 °C
Option Card:
slot A communication module, PROFINET || slot A communication module, DeviceNet || slot A communication module, Modbus TCP/EtherNet/IP || slot A communication module, CANopen daisy chain RJ45 || slot A communication module, CANopen SUB-D 9 || slot A
Discrete Output Type:
relay outputs R1A, R1B, R1C 250 V AC 3000 mA || relay outputs R1A, R1B, R1C 30 V DC 3000 mA || relay outputs R2A, R2C 250 V AC 5000 mA || relay outputs R2A, R2C 30 V DC 5000 mA || relay outputs R3A, R3C 250 V AC 5000 mA || relay outputs R3A, R3C 30 V
Operating Position:
vertical +/- 10 degree
Circularity Profile:
ENVEOLI1508009EN
Marking:
CE
Environmental Disclosure:
ENVPEP1508009EN
Local Signalling:
for embedded communication status 3 LEDs (dual colour) || for communication module status 4 LEDs (dual colour) || for presence of voltage 1 LED (red) || for local diagnostic 3 LEDs
Discrete Input Logic:
16 preset speeds
Linearity Error:
AO1, AO2 +/- 0.2 % analog output || AI1, AI2, AI3 +/- 0.15 % of maximum value analog input
Braking To Standstill:
by DC injection
Frequency Resolution:
analog input 0.012/50 Hz || display unit 0.1 Hz
Height:
678 mm
Method Of Access:
slave Modbus TCP
Enclosure Mounting:
wall mounted
Analogue Output Number:
2
Ambient Air Temperature For Operation:
40-50 °C with derating factor) || -15-40 °C without derating)
Discrete Output Number:
0
Maximum Transient Current:
7.9 A 60 s normal duty) || 8.4 A 60 s heavy duty)
Physical Interface:
Ethernet || 2-wire RS 485
Electromagnetic Compatibility:
radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3 || electrical fast transient/burst immunity test level 4 IEC 61000-4-4 || 1.2/50 µs - 8/20 µs surge immunity test level 3 IEC 61000-4-5 || conducted radio-frequency
Output Voltage:
<= power supply voltage
Data Format:
8 bits, configurable odd, even or no parity
Line Current:
5.1 A 480 V normal duty) || 4.5 A 380 V heavy duty) || 4 A 480 V heavy duty) || 5.8 A 380 V normal duty)
Connector Type:
RJ45 on the remote graphic terminal)Modbus serial || RJ45 on the remote graphic terminal)Ethernet/Modbus TCP
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Discrete Input Type:
DI7, DI8 programmable as pulse input 0-30 kHz, 24 V DC <= 30 V)
Type Of Polarization:
no impedance
Nominal Switching Frequency:
4 kHz
Continuous Output Current:
5.6 A 4 kHz heavy duty || 7.2 A 4 kHz normal duty
Phase:
3 phase
Safety Function:
STO (safe torque off) SIL 3
Degree Of Protection:
UL type 12 UL 508C
Switching Frequency:
4...12 kHz with derating factor || 2...12 kHz adjustable
Accuracy:
+/- 1 % AO1, AO2 for a temperature variation 60 °C analog output || +/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input
Mercury Free:
Yes
Device Short Name:
ATV650
Relative Humidity:
5-95 % without condensation IEC 60068-2-3
Net Weight:
10.6 kg
Pollution Degree:
2 EN/IEC 61800-5-1
Rohs Exemption Information:
Yes
Depth:
272 mm
Analogue Input Number:
3
Prospective Line Isc:
50 kA
Transmission Frame:
RTU
Motor Slip Compensation:
not available in permanent magnet motor law || adjustable || automatic whatever the load
5 ms +/- 1 ms DI5, DI6) - discrete input || 5 ms +/- 0.1 ms AI1, AI2, AI3) - analog input || 10 ms +/- 1 ms AO1) - analog output || 2 ms +/- 0.5 ms DI1...DI4) - discrete input
Protection Type:
safe torque off motor || motor phase break motor || thermal protection drive || safe torque off drive || overheating drive || overcurrent between output phases and earth drive || overload of output voltage drive || short-circuit protection drive || m
Width:
264 mm
Analogue Output Type:
software-configurable voltage AQ1, AQ2 0...10 V DC 470 Ohm 10 bits || software-configurable current AQ1, AQ2 0...20 mA 10 bits || software-configurable current DQ-, DQ+ 30 V DC || software-configurable current DQ-, DQ+ 100 mA
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
relay output R1, R2, R3 resistive, cos phi = 1 3 A 30 V DC || relay output R1, R2, R3 inductive, cos phi = 0.4 7 ms 2 A 250 V AC || relay output R1, R2, R3 inductive, cos phi = 0.4 7 ms 2 A 30 V DC || relay output R1, R2, R3 resistive, cos phi = 1 3
[Us] Rated Supply Voltage:
380...480 V - 15...10 %
Electrical Connection:
line side screw terminal 4...6 mm² || motor screw terminal 4...6 mm² || control removable screw terminals 0.5...1.5 mm² AWG 20...AWG 16
Isolation:
between power and control terminals
Noise Level:
52 dB 86/188/EEC
Product Specific Application:
process and utilities
Pollution Degree:
3
Noise Level:
52 dB
Discrete Input Number:
8
Asynchronous Motor Control Profile:
constant torque standard || variable torque standard || optimized torque mode
Number Of Addresses:
1-247 Modbus serial
Variant:
standard version
Sustainable Offer Status:
Green Premium product
Exchange Mode:
half duplex, full duplex, autonegotiation Ethernet/Modbus TCP
Range Of Product:
Altivar Process ATV600
Mounting Mode:
wall mount
Regulation Loop:
adjustable PID regulator
Operating Altitude:
1000...4800 m with current derating 1 % per 100 m || <= 3280.84 ft (1000 m) without derating
Analogue Input Type:
AI1, AI2, AI3 software-configurable voltage 0...10 V DC 31.5 kOhm 12 bits || AI1, AI2, AI3 software-configurable current 0...20 mA 250 Ohm 12 bits || AI2 voltage analog input - 10...10 V DC 31.5 kOhm 12 bits
This Altivar Process ATV600 variable speed drive can feed 3-phase synchronous and asynchronous power motors. This variable speed drive features an integrated EMC filter with 50m and 150m cable...
This Altivar Process ATV600 variable speed drive can feed 3-phase synchronous and asynchronous power motors. This variable speed drive features an integrated EMC filter with 50m and 150m cable...
