Schneider Electric

Schneider Electric ATV930D22N4 Atv930 Ip21 22Kw 400V/480V Variable Spee

(No reviews yet) Write a Review

Write a Review

Schneider Electric

Schneider Electric ATV930D22N4 Atv930 Ip21 22Kw 400V/480V Variable Spee

Rating Required Select Rating 1 star (worst) 2 stars 3 stars (average) 4 stars 5 stars (best)

Name

Email Required

Review Subject Required

Comments Required

SKU:

ATV930D22N4

UPC:

3606480883354

MPN:

Condition:

New

Option Card:

slot A communication module Profibus DP V1 || slot A communication module PROFINET || slot A communication module DeviceNet || slot A communication module EtherCAT || slot A communication module CANopen daisy chain RJ45 || slot A communication module

Communication Port Protocol:

Modbus serial || EtherNet/IP || Modbus TCP

Refresh Time:

relay output R1, R2, R3)5 ms +/- 0.5 ms)

Base Load Current At Low Overload:

46.3 A

Vibration Resistance:

1.5 mm peak to peak 2-13 Hz)IEC 60068-2-6 || 1 gn 13-200 Hz)IEC 60068-2-6

Height:

545.9 mm

Product Destination:

synchronous motors || asynchronous motors

With Safety Function Safe Programmable Logic:

FALSE

Method Of Access:

slave Modbus TCP

Environmental Class (During Operation):

class 3C3 according to IEC 60721-3-3 || class 3S3 according to IEC 60721-3-3

Maximum Output Frequency:

599 Hz

Type Of Polarization:

no impedance Modbus serial

Shock Resistance:

15 gn 11 ms IEC 60068-2-27

Protection Type:

thermal protection motor || safe torque off motor || motor phase break motor || thermal protection drive || safe torque off drive || overheating drive || overcurrent between output phases and earth drive || overload of output voltage drive || short-c

Transmission Rate:

10, 100 Mbits || 4.8 kbps || 9600 bit/s || 19200 bit/s

Analogue Input Number:

3

Emc Filter:

integrated || with EMC plate option

Phase:

3 phase

China Rohs Regulation:

X

Quantity Per Set:

1

Operating Altitude:

<= 3280.84 ft (1000 m) without derating || 1000...4800 m with current derating 1 % per 100 m

Insulation Resistance:

> 1 MOhm 500 V DC for 1 minute to earth

Environmental Disclosure:

ENVPEP1404008EN

Width:

211 mm

Minimum Switching Current:

relay output R1, R2, R3 5 mA 24 V DC

Prospective Line Isc:

50 kA

Eu Rohs Directive:

Pro-active compliance (Product out of EU RoHS legal scope)

Analogue Output Type:

software-configurable voltage AQ1, AQ2 0...10 V DC 470 Ohm 10 bits || software-configurable current AQ1, AQ2 0...20 mA 500 Ohm 10 bits

Data Format:

8 bits, configurable odd, even or no parity

Motor Slip Compensation:

adjustable || automatic whatever the load || can be suppressed || not available in permanent magnet motor law

Weee:

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.

Physical Interface:

Ethernet || 2-wire RS 485

Braking To Standstill:

by DC injection

Relay Output Number:

3

Ambient Air Temperature For Operation:

-15-50 °C without derating) || 50-60 °C with derating factor)

Discrete Output Type:

logic output DQ+ 0-1 kHz <= 30 V DC 100 mA || programmable as pulse output DQ+ 0-30 kHz <= 30 V DC 20 mA || logic output DQ- 0-1 kHz <= 30 V DC 100 mA

Electromagnetic Compatibility:

electrostatic discharge immunity test level 3 IEC 61000-4-2 || radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3 || electrical fast transient/burst immunity test level 4 IEC 61000-4-4 || 1.2/50 µs - 8/20 µs surge im

Assembly Style:

enclosed

Base Load Current At High Overload:

39.2 A

Variant:

standard version || with braking chopper

Connector Type:

2 RJ45 || 1 RJ45

Analogue Output Number:

2

Discrete Input Number:

10

Product Specific Application:

process for industrial

Ambient Air Transport Temperature:

-40-70 °C

Maximum Switching Current:

relay output R1 resistive, cos phi = 1 3 A 250 V AC || relay output R1 resistive, cos phi = 1 3 A 30 V DC || relay output R1 inductive, cos phi = 0.4 7 ms 2 A 250 V AC || relay output R1 inductive, cos phi = 0.4 7 ms 2 A 30 V DC || relay output R2, R

Maximum Acceleration Under Vibrational Stress (During Operation):

10 m/s² at 13...200 Hz

Discrete Input Logic:

16 preset speeds

Acceleration And Deceleration Ramps:

linear adjustable separately from 0.01...9999 s

Apparent Power:

28.6 kVA 480 V normal duty) || 24.9 kVA 480 V heavy duty)

Switching Frequency:

2...16 kHz adjustable || 4...16 kHz with derating factor

Maximum Deflection Under Vibratory Load (During Operation):

1.5 mm at 2...13 Hz

Transmission Frame:

RTU

Noise Level:

59.5 dB 86/188/EEC

Linearity Error:

AI1, AI2, AI3 +/- 0.15 % of maximum value analog input || AQ1, AQ2 +/- 0.2 % analog output

With Safety Function Safely Limited Speed (Sls):

TRUE

Mercury Free:

Yes

Discrete Input Type:

DI1...DI8 programmable, 24 V DC <= 30 V)3.5 kOhm || DI7, DI8 programmable as pulse input 0-30 kHz, 24 V DC <= 30 V) || STOA, STOB safe torque off, 24 V DC <= 30 V)> 2.2 kOhm

Maximum Output Voltage:

480.0 V

Range Of Product:

Altivar Process ATV900

With Safety Function Safely Limited Position (Slp):

FALSE

Maximum Acceleration Under Shock Impact (During Operation):

150 m/s² at 11 ms

Continuous Output Current:

46.3 A 4 kHz normal duty || 39.2 A 4 kHz heavy duty

Product Certifications:

CSA || UL || TÜV

California Proposition 65:

WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Motor Power Kw:

22.0 kW normal duty || 18.5 kW heavy duty

Ip Degree Of Protection:

IP21

Number Of Addresses:

1-247 Modbus serial

Exchange Mode:

half duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP

Maximum Transient Current:

55.6 A 60 s normal duty) || 58.8 A 60 s heavy duty)

Line Current:

39.6 A 380 V normal duty) || 34.1 A 380 V heavy duty) || 34.4 A 480 V normal duty) || 29.9 A 480 V heavy duty)

With Safety Function Safe Brake Management (Sbc/Sbt):

TRUE

Mounting Mode:

wall mount

Discrete Output Number:

2

Sustainable Offer Status:

Green Premium product

Ambient Air Temperature For Storage:

-40-70 °C

Volume Of Cooling Air:

215 m3/h

Regulation Loop:

adjustable PID regulator

Product Or Component Type:

variable speed drive

Input Compatibility:

DI1...DI8 discrete input level 1 PLC IEC 61131-2 || DI7, DI8 pulse input level 1 PLC IEC 65A-68 || STOA, STOB discrete input level 1 PLC IEC 61131-2

Discrete Input Logic:

positive logic (source) DI1...DI8), < 5 V, > 11 V || negative logic (sink) DI1...DI8), > 16 V, < 10 V || positive logic (source) DI7, DI8), < 0.6 V, > 2.5 V || positive logic (source) STOA, STOB), < 5 V, > 11 V

[Us] Rated Supply Voltage:

380...480 V - 15...10 %

Net Weight:

14.3 kg

With Safety Function Safe Torque Off (Sto):

TRUE

With Sft Fct Safe Stop 2 (Ss2):

FALSE

Data Format:

8 bits, configurable odd, even or no parity Modbus serial

Maximum Thdi:

<48 % from 80...100 % of load IEC 61000-3-12

Isolation:

between power and control terminals

Upgradeability:

Upgraded components available

Local Signalling:

local diagnostic 3 LED mono/dual colour) || embedded communication status 5 LED dual colour) || communication module status 2 LED dual colour) || presence of voltage 1 LED red)

Nominal Switching Frequency:

4 kHz

Marking:

CE

Overvoltage Category:

III

With Safety Function Safe Operating Stop (Sos):

FALSE

Supply:

external supply for digital inputs 24 V DC 19-30 V), <1.25 mA overload and short-circuit protection || internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 mA overload and short-circuit protection || internal supply for d

Brake Chopper Integrated:

TRUE

Relay Output Type:

configurable relay logic R1 fault relay NO/NC 100000 cycles || configurable relay logic R2 sequence relay NO 1000000 cycles || configurable relay logic R3 sequence relay NO 1000000 cycles

With Safety Function Safe Direction (Sdi):

FALSE

Degree Of Protection:

UL type 1

Permitted Relative Humidity (During Operation):

class 3K5 according to EN 60721-3

Type Of Polarization:

no impedance

Device Application:

Industrial Application

Accuracy:

+/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input || +/- 1 % AQ1, AQ2 for a temperature variation 60 °C analog output

With Safety Function Safe Position (Sp):

FALSE

Relative Symmetric Network Frequency Tolerance:

0.05

With Safety Function Safe Speed Monitor (Ssm):

FALSE

Circularity Profile:

ENVEOLI1404008EN

Environmental Characteristic:

chemical pollution resistance class 3C3 IEC 60721-3-3 || dust pollution resistance class 3S3 IEC 60721-3-3

Electrical Connection:

control screw terminal 0.5...1.5 mm² AWG 20...AWG 16 || line side screw terminal 10...16 mm² AWG 8...AWG 6 || DC bus screw terminal 10...16 mm² AWG 8...AWG 6 || motor screw terminal 16 mm² AWG 6

With Safety Function Safe Stop 1 (Ss1):

TRUE

Network Frequency:

50-60 Hz

4 Quadrant Operation Possible:

TRUE

Power Dissipation In W:

natural convection 68 W 380 V 4 kHz || forced convection 505 W 380 V 4 kHz

Analogue Input Type:

AI1, AI2, AI3 software-configurable voltage 0...10 V DC 30 kOhm 12 bits || AI1, AI2, AI3 software-configurable current 0...20 mA/4...20 mA 250 Ohm 12 bits

Operating Position:

vertical +/- 10 degree

Transmission Rate:

10/100 Mbit/s Ethernet IP/Modbus TCP || 4.8, 9.6, 19.2, 38.4 kbit/s Modbus serial

Noise Level:

59.5 dB

Asynchronous Motor Control Profile:

variable torque standard || optimized torque mode || constant torque standard

Rohs Exemption Information:

Yes

Pollution Degree:

2

Synchronous Motor Control Profile:

permanent magnet motor || synchronous reluctance motor

Relative Humidity:

5-95 % without condensation IEC 60068-2-3

Sampling Duration:

2 ms +/- 0.5 ms DI1...DI8) - discrete input || 5 ms +/- 1 ms DI7, DI8) - pulse input || 1 ms +/- 1 ms AI1, AI2, AI3) - analog input || 5 ms +/- 1 ms AQ1, AQ2) - analog output

Standards:

UL 508C || IEC 61800-3 || IEC 61800-5-1 || IEC 61000-3-12 || IEC 60721-3 || IEC 61508 || IEC 13849-1

Depth:

235 mm

Number Of Addresses:

1-247

Reach Regulation:

Reference contains Substances of Very High Concern above the threshold

Brochure:

View

Catalog:

View

Datasheet:

View