Schneider Electric

Schneider Electric ATV930D22S6 Atv930Ip20 30Hp 600V Variable Speed Dri

SKU:

ATV930D22S6

UPC:

3606481325037

MPN:

Condition:

New

Environmental Class (During Operation):

class 3C3 according to IEC 60721-3-3 || class 3S3 according to IEC 60721-3-3

Assembly Style:

enclosed

Input Compatibility:

DI1...DI8 discrete input level 1 PLC IEC 61131-2 || DI7, DI8 pulse input level 1 PLC IEC 65A-68 || STOA, STOB discrete input level 1 PLC IEC 61131-2

Degree Of Protection:

UL type 1

Marking:

CE

Height:

567 mm

Maximum Acceleration Under Shock Impact (During Operation):

150 m/s² at 11 ms

Product Certifications:

CSA || UL || TÜV

Number Of Addresses:

1-247 Modbus serial

Base Load Current At Low Overload:

34.0 A

Continuous Output Current:

34 A 4 kHz normal duty || 27 A 4 kHz heavy duty

Minimum Switching Current:

relay output R1, R2, R3 5 mA 24 V DC

With Safety Function Safe Direction (Sdi):

FALSE

Data Format:

8 bits, configurable odd, even or no parity

Analogue Input Number:

3

With Safety Function Safely Limited Position (Slp):

FALSE

Data Format:

8 bits, configurable odd, even or no parity Modbus serial

Analogue Output Type:

software-configurable voltage AQ1, AQ2 0...10 V DC 470 Ohm 10 bits || software-configurable current AQ1, AQ2 0...20 mA 500 Ohm 10 bits

Physical Interface:

Ethernet || 2-wire RS 485

California Proposition 65:

WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Discrete Input Number:

10

Discrete Input Logic:

16 preset speeds

Local Signalling:

local diagnostic 3 LED mono/dual colour) || presence of voltage 1 LED red) || embedded communication status 3 LED dual colour) || communication module status 4 LED dual colour)

Apparent Power:

28 kVA 600 V normal duty) || 24.1 kVA 600 V heavy duty)

Shock Resistance:

15 gn 11 ms IEC 60068-2-27

Network Frequency:

50-60 Hz

Eu Rohs Directive:

Pro-active compliance (Product out of EU RoHS legal scope)

Pollution Degree:

2

Isolation:

between power and control terminals

Mounting Mode:

wall mount

Relative Symmetric Network Frequency Tolerance:

0.05

Brake Chopper Integrated:

TRUE

Product Or Component Type:

variable speed drive

Maximum Output Frequency:

599 Hz

With Safety Function Safe Speed Monitor (Ssm):

FALSE

Maximum Output Voltage:

600.0 V

Maximum Transient Current:

40.8 A 60 s normal duty) || 40.5 A 60 s heavy duty)

Relative Humidity:

5-95 % without condensation IEC 60068-2-3

Reach Regulation:

Reference contains Substances of Very High Concern above the threshold

Discrete Input Logic:

positive logic (source) DI1...DI8), < 5 V, > 11 V || negative logic (sink) DI1...DI8), > 16 V, < 10 V || positive logic (source) DI7, DI8), < 0.6 V, > 2.5 V || positive logic (source) STOA, STOB), < 5 V, > 11 V

[Us] Rated Supply Voltage:

600 V - 15...10 %

Operating Altitude:

<= 3280.84 ft (1000 m) without derating || 1000...4800 m with current derating 1 % per 100 m

Overvoltage Category:

III

Weee:

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.

Noise Level:

58 dB 86/188/EEC

Volume Of Cooling Air:

330 m3/h

Depth:

242 mm

Synchronous Motor Control Profile:

permanent magnet motor || synchronous reluctance motor

Phase:

3 phase

Option Card:

slot A communication module Profibus DP V1 || slot A communication module PROFINET || slot A communication module DeviceNet || slot A communication module EtherCAT || slot A communication module CANopen daisy chain RJ45 || slot A communication module

Sustainable Offer Status:

Green Premium product

Type Of Polarization:

no impedance

Net Weight:

23 kg

Number Of Addresses:

1-247

Environmental Disclosure:

ENVPEP1704001EN

Device Application:

Industrial Application

Variant:

with braking chopper || standard version

Connector Type:

2 RJ45 || 1 RJ45

Analogue Input Type:

AI1, AI2, AI3 software-configurable voltage 0...10 V DC 30 kOhm 12 bits || AI1, AI2, AI3 software-configurable current 0...20 mA/4...20 mA 250 Ohm 12 bits

Mercury Free:

Yes

Supply:

external supply for digital inputs 24 V DC 19-30 V), <1.25 mA overload and short-circuit protection || internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 mA overload and short-circuit protection || internal supply for d

Insulation Resistance:

> 1 MOhm 500 V DC for 1 minute to earth

Power Dissipation In W:

forced convection 495 W 600 V 4 kHz || natural convection 143 W 600 V 4 kHz

Nominal Switching Frequency:

4 kHz

Accuracy:

+/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input || +/- 1 % AQ1, AQ2 for a temperature variation 60 °C analog output

Permitted Relative Humidity (During Operation):

class 3K5 according to EN 60721-3

Prospective Line Isc:

70 kA

Maximum Deflection Under Vibratory Load (During Operation):

1.5 mm at 2...13 Hz

Vibration Resistance:

1.5 mm peak to peak 2-13 Hz)IEC 60068-2-6 || 1 gn 13-200 Hz)IEC 60068-2-6

Operating Position:

vertical +/- 10 degree

Ambient Air Temperature For Storage:

-40-70 °C

Discrete Output Number:

2

Relay Output Type:

configurable relay logic R1 fault relay NO/NC 100000 cycles || configurable relay logic R2 sequence relay NO 1000000 cycles || configurable relay logic R3 sequence relay NO 1000000 cycles

With Safety Function Safe Position (Sp):

FALSE

Electrical Connection:

control screw terminal 0.5...1.5 mm² AWG 20...AWG 16 || motor screw terminal 10 mm² AWG 8 || line side screw terminal 10 mm² AWG 8 || DC bus screw terminal 10 mm² AWG 8

With Safety Function Safely Limited Speed (Sls):

TRUE

Product Destination:

synchronous motors || asynchronous motors

Transmission Rate:

10/100 Mbit/s Ethernet IP/Modbus TCP || 4.8, 9.6, 19.2, 38.4 kbit/s Modbus serial

With Safety Function Safe Torque Off (Sto):

TRUE

With Safety Function Safe Brake Management (Sbc/Sbt):

TRUE

Quantity Per Set:

1

Acceleration And Deceleration Ramps:

S, U or customized || linear adjustable separately from 0.01...9999 s

Ip Degree Of Protection:

IP20

Standards:

UL 508C || IEC 61800-3 || IEC 61800-5-1 || IEC 61000-3-12 || IEC 60721-3 || IEC 61508 || IEC 13849-1

Sampling Duration:

2 ms +/- 0.5 ms DI1...DI8) - discrete input || 5 ms +/- 1 ms DI7, DI8) - pulse input || 1 ms +/- 1 ms AI1, AI2, AI3) - analog input || 5 ms +/- 1 ms AQ1, AQ2) - analog output

Type Of Polarization:

no impedance Modbus serial

Regulation Loop:

adjustable PID regulator

Width:

246 mm

Discrete Input Type:

DI1...DI8 programmable, 24 V DC <= 30 V)3.5 kOhm || DI7, DI8 programmable as pulse input 0-30 kHz, 24 V DC <= 30 V) || STOA, STOB safe torque off, 24 V DC <= 30 V)> 2.2 kOhm

Noise Level:

58 dB

Base Load Current At High Overload:

27.0 A

Analogue Output Number:

2

Maximum Switching Current:

relay output R1 resistive, cos phi = 1 3 A 250 V AC || relay output R1 resistive, cos phi = 1 3 A 30 V DC || relay output R1 inductive, cos phi = 0.4 7 ms 2 A 250 V AC || relay output R1 inductive, cos phi = 0.4 7 ms 2 A 30 V DC || relay output R2, R

Maximum Acceleration Under Vibrational Stress (During Operation):

10 m/s² at 13...200 Hz

Electromagnetic Compatibility:

electrostatic discharge immunity test level 3 IEC 61000-4-2 || radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3 || electrical fast transient/burst immunity test level 4 IEC 61000-4-4 || 1.2/50 µs - 8/20 µs surge im

Environmental Characteristic:

chemical pollution resistance class 3C3 IEC 60721-3-3 || dust pollution resistance class 3S3 IEC 60721-3-3

With Safety Function Safe Stop 1 (Ss1):

TRUE

Ambient Air Temperature For Operation:

-15-50 °C without derating) || 50-60 °C with derating factor)

Exchange Mode:

half duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP

Protection Type:

thermal protection motor || safe torque off motor || motor phase break motor || thermal protection drive || safe torque off drive || overheating drive || overcurrent between output phases and earth drive || overload of output voltage drive || short-c

4 Quadrant Operation Possible:

TRUE

Communication Port Protocol:

Modbus TCP || EtherNet/IP || Modbus serial

Emc Filter:

integrated || with EMC plate option

With Safety Function Safe Operating Stop (Sos):

FALSE

Method Of Access:

slave Modbus TCP

With Safety Function Safe Programmable Logic:

FALSE

Upgradeability:

Upgraded components available

Linearity Error:

AI1, AI2, AI3 +/- 0.15 % of maximum value analog input || AQ1, AQ2 +/- 0.2 % analog output

Range Of Product:

Altivar Process ATV900

Transmission Frame:

RTU

Asynchronous Motor Control Profile:

variable torque standard || constant torque standard || optimized torque mode

Motor Slip Compensation:

can be suppressed || automatic whatever the load || not available in permanent magnet motor law || adjustable

Ambient Air Transport Temperature:

-40-70 °C

Discrete Output Type:

logic output DQ+ 0-1 kHz <= 30 V DC 100 mA || programmable as pulse output DQ+ 0-30 kHz <= 30 V DC 20 mA || logic output DQ- 0-1 kHz <= 30 V DC 100 mA

Refresh Time:

relay output R1, R2, R3)5 ms +/- 0.5 ms)

Rohs Exemption Information:

Yes

Braking To Standstill:

by DC injection

Circularity Profile:

ENVEOLI1704001EN

Transmission Rate:

10, 100 Mbits || 4.8 kbps || 9600 bit/s || 19200 bit/s

China Rohs Regulation:

X

Relay Output Number:

3

Switching Frequency:

2...8 kHz adjustable || 4...8 kHz with derating factor

Product Specific Application:

process for industrial

With Sft Fct Safe Stop 2 (Ss2):

FALSE

Datasheet:

View