
Schneider Electric ATV930D75N4ZU variable speed drive, Altivar Process ATV900, ATV930, 100hp, 380 to 480V, cabinet Integration, IP20, for US
Schneider Electric
$8,780.16
variable speed drive, Altivar Process ATV900, ATV930, 100hp, 380 to 480V, cabinet Integration, IP20, for US
- Refresh Time:
- relay output R1, R2, R3)5 ms +/- 0.5 ms)
- With Safety Function Safe Brake Management (Sbc/Sbt):
- TRUE
- Product Or Component Type:
- variable speed drive
- Isolation:
- between power and control terminals
- Upgradeability:
- Upgraded components available
- Acceleration And Deceleration Ramps:
- linear adjustable separately from 0.01...9999 s
- Protection Type:
- thermal protection motor || safe torque off motor || motor phase break motor || thermal protection drive || safe torque off drive || overheating drive || overcurrent between output phases and earth drive || overload of output voltage drive || short-c
- Ambient Air Temperature For Storage:
- -40-70°C
- Connector Type:
- 2 RJ45 || 1 RJ45
- Ambient Air Temperature For Operation:
- -15-50°C without derating) || 50-60°C with derating factor)
- Vibration Resistance:
- 1.5 mm peak to peak 2-13 Hz)IEC 60068-2-6 || 1 gn 13-200 Hz)IEC 60068-2-6
- With Safety Function Safe Torque Off (Sto):
- TRUE
- Discrete Input Number:
- 10
- Type Of Polarization:
- no impedance
- [Us] Rated Supply Voltage:
- 380...480 V - 15...10 %
- Environmental Class (During Operation):
- class 3C3 according to IEC 60721-3-3 || class 3S3 according to IEC 60721-3-3
- Maximum Deflection Under Vibratory Load (During Operation):
- 1.5 mm at 2...13 Hz
- Braking To Standstill:
- by DC injection
- Regulation Loop:
- adjustable PID regulator
- Assembly Style:
- with heat sink
- Height:
- 748 mm
- Device Application:
- Industrial Application
- Width:
- 265 mm
- Volume Of Cooling Air:
- 295 m3/h
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Product Destination:
- synchronous motors || asynchronous motors
- Asynchronous Motor Control Profile:
- variable torque standard || optimized torque mode || constant torque standard
- Product Certifications:
- UL || CSA || TÃV
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- With Sft Fct Safe Stop 2 (Ss2):
- FALSE
- Environmental Characteristic:
- chemical pollution resistance class 3C3 IEC 60721-3-3 || dust pollution resistance class 3S3 IEC 60721-3-3
- Physical Interface:
- Ethernet || 2-wire RS 485
- Maximum Output Frequency:
- 599 Hz
- Input Compatibility:
- DI1...DI8 discrete input level 1 PLC IEC 61131-2 || DI7, DI8 pulse input level 1 PLC IEC 65A-68 || STOA, STOB discrete input level 1 PLC IEC 61131-2
- Discrete Output Type:
- logic output DQ+ 0-1 kHz <= 30 V DC 100 mA || programmable as pulse output DQ+ 0-30 kHz <= 30 V DC 20 mA || logic output DQ- 0-1 kHz <= 30 V DC 100 mA
- Environmental Disclosure:
- ENVPEP2007013EN
- Ip Degree Of Protection:
- IP21
- Noise Level:
- 68.3 dB 86/188/EEC
- Maximum Switching Current:
- relay output R1 resistive, cos phi = 1 3 A 250 V AC || relay output R1 resistive, cos phi = 1 3 A 30 V DC || relay output R1 inductive, cos phi = 0.4 7 ms 2 A 250 V AC || relay output R1 inductive, cos phi = 0.4 7 ms 2 A 30 V DC || relay output R2, R
- Relay Output Type:
- configurable relay logic R1 fault relay NO/NC 100000 cycles || configurable relay logic R2 sequence relay NO 1000000 cycles || configurable relay logic R3 sequence relay NO 1000000 cycles
- Product Specific Application:
- process for industrial
- Insulation Resistance:
- > 1 MOhm 500 V DC for 1 minute to earth
- Marking:
- CE
- With Safety Function Safe Position (Sp):
- FALSE
- Quantity Per Set:
- 1
- Country of Origin:
- India
- Relative Humidity:
- 5-95 % without condensation IEC 60068-2-3
- Continuous Output Current:
- 145 A 2.5 kHz normal duty || 106 A 2.5 kHz heavy duty
- Variant:
- standard version || with braking chopper
- Discrete Input Logic:
- positive logic (source) DI1...DI8), < 5 V, > 11 V || negative logic (sink) DI1...DI8), > 16 V, < 10 V || positive logic (source) DI7, DI8), < 0.6 V, > 2.5 V || positive logic (source) STOA, STOB), < 5 V, > 11 V