Schneider Electric

Schneider Electric ATV930U22N4ZU Atv930 T12 Rdy Ip20 3Hp 400V Wo Keypad

SKU:

ATV930U22N4ZU

UPC:

3606489740207

MPN:

Condition:

New

Shock Resistance:

15 gn 11 ms IEC 60068-2-27

Number Of Addresses:

1-247 Modbus serial

Analogue Output Type:

software-configurable voltage AQ1, AQ2 0...10 V DC 470 Ohm 10 bits || software-configurable current AQ1, AQ2 0...20 mA 500 Ohm 10 bits

Mounting Mode:

cabinet mount

Maximum Switching Current:

relay output R1 resistive, cos phi = 1 3 A 250 V AC || relay output R1 resistive, cos phi = 1 3 A 30 V DC || relay output R1 inductive, cos phi = 0.4 7 ms 2 A 250 V AC || relay output R1 inductive, cos phi = 0.4 7 ms 2 A 30 V DC || relay output R2, R

Discrete Input Type:

DI1...DI8 programmable, 24 V DC <= 30 V)3.5 kOhm || DI7, DI8 programmable as pulse input 0-30 kHz, 24 V DC <= 30 V) || STOA, STOB safe torque off, 24 V DC <= 30 V)> 2.2 kOhm

Pollution Degree:

2

Apparent Power:

3.2 kVA 480 V normal duty) || 2.4 kVA 480 V heavy duty)

Maximum Output Frequency:

599 Hz

Emc Filter:

integrated || with EMC plate option

Product Specific Application:

process for industrial

Weee:

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.

Maximum Acceleration Under Shock Impact (During Operation):

150 m/s² at 11 ms

Discrete Output Number:

2

Data Format:

8 bits, configurable odd, even or no parity

Volume Of Cooling Air:

38 m3/h

Discrete Input Logic:

16 preset speeds

Variant:

standard version || with braking chopper

With Safety Function Safely Limited Speed (Sls):

TRUE

Maximum Output Voltage:

480.0 V

Asynchronous Motor Control Profile:

constant torque standard || optimized torque mode || variable torque standard

Transmission Rate:

10, 100 Mbits || 4.8 kbps || 9600 bit/s || 19200 bit/s

Operating Altitude:

<= 3280.84 ft (1000 m) without derating || 1000...4800 m with current derating 1 % per 100 m

Device Application:

Industrial Application

Product Or Component Type:

variable speed drive

Relay Output Type:

configurable relay logic R1 fault relay NO/NC 100000 cycles || configurable relay logic R2 sequence relay NO 1000000 cycles || configurable relay logic R3 sequence relay NO 1000000 cycles

Relative Humidity:

5-95 % without condensation IEC 60068-2-3

With Safety Function Safe Torque Off (Sto):

TRUE

Noise Level:

54.5 dB 86/188/EEC

Environmental Class (During Operation):

class 3C3 according to IEC 60721-3-3 || class 3S3 according to IEC 60721-3-3

Nominal Switching Frequency:

4 kHz

Electromagnetic Compatibility:

electrostatic discharge immunity test level 3 IEC 61000-4-2 || radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3 || electrical fast transient/burst immunity test level 4 IEC 61000-4-4 || 1.2/50 µs - 8/20 µs surge im

Maximum Deflection Under Vibratory Load (During Operation):

1.5 mm at 2...13 Hz

Assembly Style:

with heat sink

Insulation Resistance:

> 1 MOhm 500 V DC for 1 minute to earth

4 Quadrant Operation Possible:

TRUE

With Safety Function Safe Speed Monitor (Ssm):

FALSE

Prospective Line Isc:

50 kA

Standards:

UL 508C || IEC 61800-3 || IEC 61800-5-1 || IEC 61000-3-12 || IEC 60721-3 || IEC 61508 || IEC 13849-1

Overvoltage Category:

III

Permitted Relative Humidity (During Operation):

class 3K5 according to EN 60721-3

Environmental Characteristic:

chemical pollution resistance class 3C3 IEC 60721-3-3 || dust pollution resistance class 3S3 IEC 60721-3-3

Discrete Input Logic:

positive logic (source) DI1...DI8), < 5 V, > 11 V || negative logic (sink) DI1...DI8), > 16 V, < 10 V || positive logic (source) DI7, DI8), < 0.6 V, > 2.5 V || positive logic (source) STOA, STOB), < 5 V, > 11 V

Transmission Rate:

10/100 Mbit/s Ethernet IP/Modbus TCP || 4.8, 9.6, 19.2, 38.4 kbit/s Modbus serial

Circularity Profile:

ENVEOLI2007009EN

Relative Symmetric Network Frequency Tolerance:

0.05

Transmission Frame:

RTU

Regulation Loop:

adjustable PID regulator

Supply:

external supply for digital inputs 24 V DC 19-30 V), <1.25 mA overload and short-circuit protection || internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 mA overload and short-circuit protection || internal supply for d

Power Dissipation In W:

natural convection 30 W 380 V 4 kHz || forced convection 60 W 380 V 4 kHz

Motor Power Kw:

2.2 kW normal duty || 1.5 kW heavy duty

Discrete Output Type:

logic output DQ+ 0-1 kHz <= 30 V DC 100 mA || programmable as pulse output DQ+ 0-30 kHz <= 30 V DC 20 mA || logic output DQ- 0-1 kHz <= 30 V DC 100 mA

Marking:

CE

Exchange Mode:

half duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP

Rohs Exemption Information:

Yes

Product Destination:

synchronous motors || asynchronous motors

[Us] Rated Supply Voltage:

380...480 V - 15...10 %

Physical Interface:

Ethernet || 2-wire RS 485

Brake Chopper Integrated:

TRUE

With Safety Function Safe Position (Sp):

FALSE

Acceleration And Deceleration Ramps:

linear adjustable separately from 0.01...9999 s

With Safety Function Safe Direction (Sdi):

FALSE

China Rohs Regulation:

X

Accuracy:

+/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input || +/- 1 % AQ1, AQ2 for a temperature variation 60 °C analog output

Noise Level:

54.5 dB

Local Signalling:

local diagnostic 3 LED mono/dual colour) || embedded communication status 5 LED dual colour) || communication module status 2 LED dual colour) || presence of voltage 1 LED red)

Option Card:

slot A communication module Profibus DP V1 || slot A communication module PROFINET || slot A communication module DeviceNet || slot A communication module EtherCAT || slot A communication module CANopen daisy chain RJ45 || slot A communication module

Base Load Current At Low Overload:

5.6 A

Discrete Input Number:

10

Ambient Air Temperature For Storage:

-40-70 °C

Type Of Polarization:

no impedance

With Safety Function Safe Brake Management (Sbc/Sbt):

TRUE

Ip Degree Of Protection:

IP21

Analogue Output Number:

2

Degree Of Protection:

UL type 12

Phase:

3 phase

Base Load Current At High Overload:

4.0 A

Upgradeability:

Upgraded components available

Minimum Switching Current:

relay output R1, R2, R3 5 mA 24 V DC

Input Compatibility:

DI1...DI8 discrete input level 1 PLC IEC 61131-2 || DI7, DI8 pulse input level 1 PLC IEC 65A-68 || STOA, STOB discrete input level 1 PLC IEC 61131-2

With Safety Function Safe Programmable Logic:

FALSE

Height:

285 mm

Type Of Polarization:

no impedance Modbus serial

Protection Type:

thermal protection motor || safe torque off motor || motor phase break motor || thermal protection drive || safe torque off drive || overheating drive || overcurrent between output phases and earth drive || overload of output voltage drive || short-c

Maximum Transient Current:

6.7 A 60 s normal duty) || 6 A 60 s heavy duty)

Synchronous Motor Control Profile:

permanent magnet motor || synchronous reluctance motor

Isolation:

between power and control terminals

Maximum Thdi:

<48 % full load IEC 61000-3-12

With Safety Function Safe Operating Stop (Sos):

FALSE

Environmental Disclosure:

ENVPEP2007009EN

With Safety Function Safe Stop 1 (Ss1):

TRUE

With Safety Function Safely Limited Position (Slp):

FALSE

Sustainable Offer Status:

Green Premium product

Network Frequency:

50-60 Hz

Electrical Connection:

control screw terminal 0.5...1.5 mm² AWG 20...AWG 16 || line side screw terminal 2.5...6 mm² AWG 14...AWG 10 || motor screw terminal 2.5...6 mm² AWG 14...AWG 10 || DC bus screw terminal 2.5...6 mm² AWG 14...AWG 10

Data Format:

8 bits, configurable odd, even or no parity Modbus serial

With Sft Fct Safe Stop 2 (Ss2):

FALSE

Braking To Standstill:

by DC injection

Reach Regulation:

Reference contains Substances of Very High Concern above the threshold

Operating Position:

vertical +/- 10 degree

Ambient Air Transport Temperature:

-40-70 °C

Ambient Air Temperature For Operation:

-15-50 °C without derating) || 50-60 °C with derating factor)

Switching Frequency:

2...16 kHz adjustable || 4...16 kHz with derating factor

Depth:

196 mm

Line Current:

4.3 A 380 V normal duty) || 3.1 A 380 V heavy duty) || 3.8 A 480 V normal duty) || 2.9 A 480 V heavy duty)

Motor Slip Compensation:

can be suppressed || not available in permanent magnet motor law || adjustable || automatic whatever the load

Quantity Per Set:

1

Analogue Input Type:

AI1, AI2, AI3 software-configurable voltage 0...10 V DC 30 kOhm 12 bits || AI1, AI2, AI3 software-configurable current 0...20 mA/4...20 mA 250 Ohm 12 bits

Maximum Acceleration Under Vibrational Stress (During Operation):

10 m/s² at 13...200 Hz

Vibration Resistance:

1.5 mm peak to peak 2-13 Hz)IEC 60068-2-6 || 1 gn 13-200 Hz)IEC 60068-2-6

Mercury Free:

Yes

Analogue Input Number:

3

Continuous Output Current:

5.6 A 4 kHz normal duty || 4 A 4 kHz heavy duty

Linearity Error:

AI1, AI2, AI3 +/- 0.15 % of maximum value analog input || AQ1, AQ2 +/- 0.2 % analog output

Sampling Duration:

2 ms +/- 0.5 ms DI1...DI8) - discrete input || 5 ms +/- 1 ms DI7, DI8) - pulse input || 1 ms +/- 1 ms AI1, AI2, AI3) - analog input || 5 ms +/- 1 ms AQ1, AQ2) - analog output

Eu Rohs Directive:

Pro-active compliance (Product out of EU RoHS legal scope)

Method Of Access:

slave Modbus TCP

Width:

130 mm

Refresh Time:

relay output R1, R2, R3)5 ms +/- 0.5 ms)

Communication Port Protocol:

Modbus TCP || EtherNet/IP || Modbus serial

California Proposition 65:

WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Number Of Addresses:

1-247

Relay Output Number:

3

Connector Type:

2 RJ45 || 1 RJ45

Range Of Product:

Altivar Process ATV900

Product Certifications:

CSA || UL || TÜV

Datasheet:

View