Schneider Electric ATV930U22S6X Atv930 Ip21 3Hp 600V Variateur De Vit.

SKU:

ATV930U22S6X

UPC:

3.60648E+12

MPN:

Condition:

New

Reach Regulation:

Reference contains Substances of Very High Concern above the threshold

Maximum Deflection Under Vibratory Load (During Operation):

1.5 mm at 2...13 Hz

Physical Interface:

Ethernet || 2-wire RS 485

Environmental Class (During Operation):

class 3C3 according to IEC 60721-3-3 || class 3S3 according to IEC 60721-3-3

Noise Level:

56 dB

Nominal Switching Frequency:

4 kHz

Circularity Profile:

ENVEOLI1707007EN

With Safety Function Safe Direction (Sdi):

FALSE

Maximum Output Voltage:

600.0 V

Sustainable Offer Status:

Green Premium product

Motor Slip Compensation:

can be suppressed || adjustable || not available in permanent magnet motor law || automatic whatever the load

Variant:

standard version || with braking chopper

Asynchronous Motor Control Profile:

variable torque standard || constant torque standard || optimized torque mode

Phase:

3 phase

With Safety Function Safe Brake Management (Sbc/Sbt):

TRUE

With Safety Function Safely Limited Speed (Sls):

TRUE

Noise Level:

56 dB 86/188/EEC

Quantity Per Set:

1

Isolation:

between power and control terminals

With Safety Function Safe Position (Sp):

FALSE

Method Of Access:

slave Modbus TCP

Electrical Connection:

control screw terminal 0.5...1.5 mm² AWG 20...AWG 16 || motor screw terminal 6...10 mm² AWG 10...AWG 8 || line side screw terminal 6 mm² AWG 10 || DC bus screw terminal 6 mm² AWG 10

Maximum Output Frequency:

599 Hz

California Proposition 65:

WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Ambient Air Temperature For Storage:

-40-70 °C

Communication Port Protocol:

Modbus TCP || EtherNet/IP || Modbus serial

Discrete Output Type:

logic output DQ+ 0-1 kHz <= 30 V DC 100 mA || programmable as pulse output DQ+ 0-30 kHz <= 30 V DC 20 mA || logic output DQ- 0-1 kHz <= 30 V DC 100 mA

Insulation Resistance:

> 1 MOhm 500 V DC for 1 minute to earth

[Us] Rated Supply Voltage:

600 V - 15...10 %

Upgradeability:

Upgraded components available

Input Compatibility:

DI1...DI8 discrete input level 1 PLC IEC 61131-2 || DI7, DI8 pulse input level 1 PLC IEC 65A-68 || STOA, STOB discrete input level 1 PLC IEC 61131-2

Minimum Switching Current:

relay output R1, R2, R3 5 mA 24 V DC

Sampling Duration:

2 ms +/- 0.5 ms DI1...DI8) - discrete input || 5 ms +/- 1 ms DI7, DI8) - pulse input || 1 ms +/- 1 ms AI1, AI2, AI3) - analog input || 5 ms +/- 1 ms AQ1, AQ2) - analog output

Number Of Addresses:

1-247

Data Format:

8 bits, configurable odd, even or no parity Modbus serial

Ambient Air Temperature For Operation:

-15-50 °C without derating) || 50-60 °C with derating factor)

Transmission Rate:

10/100 Mbit/s Ethernet IP/Modbus TCP || 4.8, 9.6, 19.2, 38.4 kbit/s Modbus serial

Electromagnetic Compatibility:

electrostatic discharge immunity test level 3 IEC 61000-4-2 || radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3 || electrical fast transient/burst immunity test level 4 IEC 61000-4-4 || 1.2/50 µs - 8/20 µs surge immu

Vibration Resistance:

1.5 mm peak to peak 2-13 Hz)IEC 60068-2-6 || 1 gn 13-200 Hz)IEC 60068-2-6

Width:

171 mm

With Safety Function Safe Torque Off (Sto):

TRUE

Transmission Rate:

10, 100 Mbits || 4.8 kbps || 9600 bit/s || 19200 bit/s

Maximum Acceleration Under Shock Impact (During Operation):

150 m/s² at 11 ms

Refresh Time:

relay output R1, R2, R3)5 ms +/- 0.5 ms)

With Sft Fct Safe Stop 2 (Ss2):

FALSE

Base Load Current At High Overload:

3.1 A

Range Of Product:

Altivar Process ATV900

Continuous Output Current:

4.2 A 4 kHz normal duty || 3.1 A 4 kHz heavy duty

With Safety Function Safe Speed Monitor (Ssm):

FALSE

Degree Of Protection:

UL type 1

Pollution Degree:

2

Acceleration And Deceleration Ramps:

linear adjustable separately from 0.01...9999 s || S, U or customized

Ambient Air Transport Temperature:

-40-70 °C

Option Card:

slot A communication module Profibus DP V1 || slot A communication module PROFINET || slot A communication module DeviceNet || slot A communication module EtherCAT || slot A communication module CANopen daisy chain RJ45 || slot A communication module

Protection Type:

thermal protection motor || safe torque off motor || motor phase break motor || thermal protection drive || safe torque off drive || overheating drive || overcurrent between output phases and earth drive || overload of output voltage drive || short-c

Discrete Input Logic:

positive logic (source) DI1...DI8), < 5 V, > 11 V || negative logic (sink) DI1...DI8), > 16 V, < 10 V || positive logic (source) DI7, DI8), < 0.6 V, > 2.5 V || positive logic (source) STOA, STOB), < 5 V, > 11 V

Discrete Input Type:

DI1...DI8 programmable, 24 V DC <= 30 V)3.5 kOhm || DI7, DI8 programmable as pulse input 0-30 kHz, 24 V DC <= 30 V) || STOA, STOB safe torque off, 24 V DC <= 30 V)> 2.2 kOhm

Ip Degree Of Protection:

IP21

Mounting Mode:

wall mount

Analogue Output Type:

software-configurable voltage AQ1, AQ2 0...10 V DC 470 Ohm 10 bits || software-configurable current AQ1, AQ2 0...20 mA 500 Ohm 10 bits

Shock Resistance:

15 gn 11 ms IEC 60068-2-27

Network Frequency:

50-60 Hz

Regulation Loop:

adjustable PID regulator

Synchronous Motor Control Profile:

permanent magnet motor || synchronous reluctance motor

Discrete Output Number:

2

Rohs Exemption Information:

Yes

Analogue Input Number:

3

Accuracy:

+/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input || +/- 1 % AQ1, AQ2 for a temperature variation 60 °C analog output

Mercury Free:

Yes

Relative Symmetric Network Frequency Tolerance:

0.05

Permitted Relative Humidity (During Operation):

class 3K5 according to EN 60721-3

Type Of Polarization:

no impedance Modbus serial

Eu Rohs Directive:

Pro-active compliance (Product out of EU RoHS legal scope)

Data Format:

8 bits, configurable odd, even or no parity

Depth:

236 mm

Standards:

UL 508C || IEC 61800-3 || IEC 61800-5-1 || IEC 61000-3-12 || IEC 60721-3 || IEC 61508 || IEC 13849-1

Type Of Polarization:

no impedance

Supply:

external supply for digital inputs 24 V DC 19-30 V), <1.25 mA overload and short-circuit protection || internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 mA overload and short-circuit protection || internal supply for d

4 Quadrant Operation Possible:

TRUE

Volume Of Cooling Air:

103 m3/h

Operating Altitude:

<= 3280.84 ft (1000 m) without derating || 1000...4800 m with current derating 1 % per 100 m

Analogue Output Number:

2

With Safety Function Safely Limited Position (Slp):

FALSE

Overvoltage Category:

III

Discrete Input Number:

10

Height:

409 mm

Relay Output Type:

configurable relay logic R1 fault relay NO/NC 100000 cycles || configurable relay logic R2 sequence relay NO 1000000 cycles || configurable relay logic R3 sequence relay NO 1000000 cycles

Connector Type:

2 RJ45 || 1 RJ45

Device Application:

Industrial Application

Base Load Current At Low Overload:

4.2 A

Product Destination:

synchronous motors || asynchronous motors

Discrete Input Logic:

16 preset speeds

Weee:

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.

With Safety Function Safe Operating Stop (Sos):

FALSE

Product Certifications:

TÜV || CSA || UL

Operating Position:

vertical +/- 10 degree

Exchange Mode:

half duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP

Transmission Frame:

RTU

Analogue Input Type:

AI1, AI2, AI3 software-configurable voltage 0...10 V DC 30 kOhm 12 bits || AI1, AI2, AI3 software-configurable current 0...20 mA/4...20 mA 250 Ohm 12 bits

Emc Filter:

integrated || with EMC plate option

Maximum Switching Current:

relay output R1 resistive, cos phi = 1 3 A 250 V AC || relay output R1 resistive, cos phi = 1 3 A 30 V DC || relay output R1 inductive, cos phi = 0.4 7 ms 2 A 250 V AC || relay output R1 inductive, cos phi = 0.4 7 ms 2 A 30 V DC || relay output R2, R

China Rohs Regulation:

X

Environmental Characteristic:

chemical pollution resistance class 3C3 IEC 60721-3-3 || dust pollution resistance class 3S3 IEC 60721-3-3

Prospective Line Isc:

70 kA

Switching Frequency:

2...16 kHz adjustable || 4...16 kHz with derating factor

Product Or Component Type:

variable speed drive

Environmental Disclosure:

ENVPEP1707007EN

Maximum Acceleration Under Vibrational Stress (During Operation):

10 m/s² at 13...200 Hz

With Safety Function Safe Stop 1 (Ss1):

TRUE

Braking To Standstill:

by DC injection

Product Specific Application:

process for industrial

Maximum Transient Current:

5.04 A 60 s normal duty) || 4.7 A 60 s heavy duty)

Linearity Error:

AI1, AI2, AI3 +/- 0.15 % of maximum value analog input || AQ1, AQ2 +/- 0.2 % analog output

Net Weight:

5.5 kg

Power Dissipation In W:

forced convection 31 W 600 V 4 kHz || natural convection 82 W 600 V 4 kHz

Assembly Style:

enclosed

Relative Humidity:

5-95 % without condensation IEC 60068-2-3

Local Signalling:

local diagnostic 3 LED mono/dual colour) || presence of voltage 1 LED red) || embedded communication status 3 LED dual colour) || communication module status 4 LED dual colour)

With Safety Function Safe Programmable Logic:

FALSE

Relay Output Number:

3

Number Of Addresses:

1-247 Modbus serial

Brake Chopper Integrated:

TRUE

Apparent Power:

3 kVA 600 V normal duty) || 2.2 kVA 600 V heavy duty)