Schneider Electric ATV930U30N4 Atv930 Ip21 3Kw 400V/480V Variable Speed

(No reviews yet) Write a Review
SKU:
ATV930U30N4
UPC:
3606480883286
Condition:
New
Maximum Acceleration Under Shock Impact (During Operation):
150 m/s² at 11 ms
Relative Humidity:
5-95 % without condensation IEC 60068-2-3
Phase:
3 phase
Width:
144 mm
Transmission Frame:
RTU
Maximum Thdi:
<48 % full load IEC 61000-3-12
Base Load Current At Low Overload:
7.2 A
Ambient Air Transport Temperature:
-40-70 °C
Protection Type:
thermal protection motor || safe torque off motor || motor phase break motor || thermal protection drive || safe torque off drive || overheating drive || overcurrent between output phases and earth drive || overload of output voltage drive || short-c
Volume Of Cooling Air:
38 m3/h
Product Specific Application:
process for industrial
Electromagnetic Compatibility:
electrostatic discharge immunity test level 3 IEC 61000-4-2 || radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3 || electrical fast transient/burst immunity test level 4 IEC 61000-4-4 || 1.2/50 µs - 8/20 µs surge im
Minimum Switching Current:
relay output R1, R2, R3 5 mA 24 V DC
Product Certifications:
TÜV || CSA || UL
Input Compatibility:
DI1...DI8 discrete input level 1 PLC IEC 61131-2 || DI7, DI8 pulse input level 1 PLC IEC 65A-68 || STOA, STOB discrete input level 1 PLC IEC 61131-2
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Exchange Mode:
half duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP
Maximum Deflection Under Vibratory Load (During Operation):
1.5 mm at 2...13 Hz
With Safety Function Safe Direction (Sdi):
FALSE
Type Of Polarization:
no impedance
Height:
350 mm
Discrete Input Logic:
16 preset speeds
Braking To Standstill:
by DC injection
Discrete Input Type:
DI1...DI8 programmable, 24 V DC <= 30 V)3.5 kOhm || DI7, DI8 programmable as pulse input 0-30 kHz, 24 V DC <= 30 V) || STOA, STOB safe torque off, 24 V DC <= 30 V)> 2.2 kOhm
Environmental Characteristic:
chemical pollution resistance class 3C3 IEC 60721-3-3 || dust pollution resistance class 3S3 IEC 60721-3-3
Acceleration And Deceleration Ramps:
linear adjustable separately from 0.01...9999 s
Net Weight:
4.6 kg
Permitted Relative Humidity (During Operation):
class 3K5 according to EN 60721-3
Discrete Input Number:
10
Vibration Resistance:
1.5 mm peak to peak 2-13 Hz)IEC 60068-2-6 || 1 gn 13-200 Hz)IEC 60068-2-6
With Safety Function Safe Stop 1 (Ss1):
TRUE
Motor Slip Compensation:
automatic whatever the load || not available in permanent magnet motor law || adjustable || can be suppressed
Overvoltage Category:
III
Data Format:
8 bits, configurable odd, even or no parity
Supply:
external supply for digital inputs 24 V DC 19-30 V), <1.25 mA overload and short-circuit protection || internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 mA overload and short-circuit protection || internal supply for d
Upgradeability:
Upgraded components available
Maximum Output Frequency:
599 Hz
Accuracy:
+/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input || +/- 1 % AQ1, AQ2 for a temperature variation 60 °C analog output
Operating Altitude:
<= 3280.84 ft (1000 m) without derating || 1000...4800 m with current derating 1 % per 100 m
Relative Symmetric Network Frequency Tolerance:
0.05
With Safety Function Safe Brake Management (Sbc/Sbt):
TRUE
Environmental Class (During Operation):
class 3C3 according to IEC 60721-3-3 || class 3S3 according to IEC 60721-3-3
Number Of Addresses:
1-247
Network Frequency:
50-60 Hz
Transmission Rate:
10/100 Mbit/s Ethernet IP/Modbus TCP || 4.8, 9.6, 19.2, 38.4 kbit/s Modbus serial
Ambient Air Temperature For Storage:
-40-70 °C
Refresh Time:
relay output R1, R2, R3)5 ms +/- 0.5 ms)
Noise Level:
54.5 dB 86/188/EEC
Regulation Loop:
adjustable PID regulator
With Sft Fct Safe Stop 2 (Ss2):
FALSE
Emc Filter:
integrated || with EMC plate option
With Safety Function Safe Speed Monitor (Ssm):
FALSE
Prospective Line Isc:
50 kA
Discrete Output Type:
logic output DQ+ 0-1 kHz <= 30 V DC 100 mA || programmable as pulse output DQ+ 0-30 kHz <= 30 V DC 20 mA || logic output DQ- 0-1 kHz <= 30 V DC 100 mA
Physical Interface:
Ethernet || 2-wire RS 485
Power Dissipation In W:
natural convection 31 W 380 V 4 kHz || forced convection 78 W 380 V 4 kHz
Mounting Mode:
wall mount
Noise Level:
54.5 dB
Device Application:
Industrial Application
Ip Degree Of Protection:
IP21
Option Card:
slot A communication module Profibus DP V1 || slot A communication module PROFINET || slot A communication module DeviceNet || slot A communication module EtherCAT || slot A communication module CANopen daisy chain RJ45 || slot A communication module
Analogue Output Number:
2
Sampling Duration:
2 ms +/- 0.5 ms DI1...DI8) - discrete input || 5 ms +/- 1 ms DI7, DI8) - pulse input || 1 ms +/- 1 ms AI1, AI2, AI3) - analog input || 5 ms +/- 1 ms AQ1, AQ2) - analog output
China Rohs Regulation:
X
Assembly Style:
enclosed
With Safety Function Safe Programmable Logic:
FALSE
With Safety Function Safely Limited Position (Slp):
FALSE
Discrete Input Logic:
positive logic (source) DI1...DI8), < 5 V, > 11 V || negative logic (sink) DI1...DI8), > 16 V, < 10 V || positive logic (source) DI7, DI8), < 0.6 V, > 2.5 V || positive logic (source) STOA, STOB), < 5 V, > 11 V
Nominal Switching Frequency:
4 kHz
Maximum Acceleration Under Vibrational Stress (During Operation):
10 m/s² at 13...200 Hz
With Safety Function Safe Position (Sp):
FALSE
Communication Port Protocol:
Modbus serial || EtherNet/IP || Modbus TCP
Isolation:
between power and control terminals
With Safety Function Safe Torque Off (Sto):
TRUE
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Transmission Rate:
10, 100 Mbits || 4.8 kbps || 9600 bit/s || 19200 bit/s
Local Signalling:
local diagnostic 3 LED mono/dual colour) || embedded communication status 5 LED dual colour) || communication module status 2 LED dual colour) || presence of voltage 1 LED red)
Pollution Degree:
2
Ambient Air Temperature For Operation:
-15-50 °C without derating) || 50-60 °C with derating factor)
With Safety Function Safe Operating Stop (Sos):
FALSE
Operating Position:
vertical +/- 10 degree
Product Or Component Type:
variable speed drive
Variant:
with braking chopper || standard version
Relay Output Number:
3
Method Of Access:
slave Modbus TCP
Mercury Free:
Yes
Environmental Disclosure:
ENVPEP1501005EN
Maximum Switching Current:
relay output R1 resistive, cos phi = 1 3 A 250 V AC || relay output R1 resistive, cos phi = 1 3 A 30 V DC || relay output R1 inductive, cos phi = 0.4 7 ms 2 A 250 V AC || relay output R1 inductive, cos phi = 0.4 7 ms 2 A 30 V DC || relay output R2, R
Base Load Current At High Overload:
5.6 A
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Range Of Product:
Altivar Process ATV900
Linearity Error:
AI1, AI2, AI3 +/- 0.15 % of maximum value analog input || AQ1, AQ2 +/- 0.2 % analog output
Analogue Output Type:
software-configurable voltage AQ1, AQ2 0...10 V DC 470 Ohm 10 bits || software-configurable current AQ1, AQ2 0...20 mA 500 Ohm 10 bits
Shock Resistance:
15 gn 11 ms IEC 60068-2-27
Switching Frequency:
2...16 kHz adjustable || 4...16 kHz with derating factor
Connector Type:
2 RJ45 || 1 RJ45
Number Of Addresses:
1-247 Modbus serial
Data Format:
8 bits, configurable odd, even or no parity Modbus serial
Standards:
UL 508C || IEC 61800-3 || IEC 61800-5-1 || IEC 61000-3-12 || IEC 60721-3 || IEC 61508 || IEC 13849-1
Type Of Polarization:
no impedance Modbus serial
Sustainable Offer Status:
Green Premium product
Depth:
206 mm
Line Current:
5.8 A 380 V normal duty) || 4.5 A 380 V heavy duty) || 5.1 A 480 V normal duty) || 4.0 A 480 V heavy duty)
Discrete Output Number:
2
Brake Chopper Integrated:
TRUE
Insulation Resistance:
> 1 MOhm 500 V DC for 1 minute to earth
Analogue Input Type:
AI1, AI2, AI3 software-configurable voltage 0...10 V DC 30 kOhm 12 bits || AI1, AI2, AI3 software-configurable current 0...20 mA/4...20 mA 250 Ohm 12 bits
Maximum Output Voltage:
480.0 V
Apparent Power:
4.2 kVA 480 V normal duty) || 3.3 kVA 480 V heavy duty)
Continuous Output Current:
7.2 A 4 kHz normal duty || 5.6 A 4 kHz heavy duty
With Safety Function Safely Limited Speed (Sls):
TRUE
Circularity Profile:
ENVEOLI1501005EN
Marking:
CE
Motor Power Kw:
3.0 kW normal duty || 2.2 kW heavy duty
Synchronous Motor Control Profile:
permanent magnet motor || synchronous reluctance motor
Electrical Connection:
control screw terminal 0.5...1.5 mm² AWG 20...AWG 16 || line side screw terminal 2.5...6 mm² AWG 14...AWG 10 || motor screw terminal 2.5...6 mm² AWG 14...AWG 10 || DC bus screw terminal 2.5...6 mm² AWG 14...AWG 10
Degree Of Protection:
UL type 1
[Us] Rated Supply Voltage:
380...480 V - 15...10 %
Product Destination:
asynchronous motors || synchronous motors
Relay Output Type:
configurable relay logic R1 fault relay NO/NC 100000 cycles || configurable relay logic R2 sequence relay NO 1000000 cycles || configurable relay logic R3 sequence relay NO 1000000 cycles
Quantity Per Set:
1
Rohs Exemption Information:
Yes
Asynchronous Motor Control Profile:
variable torque standard || constant torque standard || optimized torque mode
4 Quadrant Operation Possible:
TRUE
Analogue Input Number:
3
Maximum Transient Current:
8.6 A 60 s normal duty) || 8.4 A 60 s heavy duty)
Brochure:
View
Catalog:
View
Datasheet:
View
  • Schneider Electric ATV930U30N4 Atv930 Ip21 3Kw 400V/480V Variable Speed
  • Schneider Electric ATV930U30N4 Atv930 Ip21 3Kw 400V/480V Variable Speed
  • Schneider Electric ATV930U30N4 Atv930 Ip21 3Kw 400V/480V Variable Speed
$2,266.31

Description

This Altivar Process ATV900 variable speed drive can feed 3-phase synchronous and asynchronous power motors. It is suitable for motors with power rating up to 3kW for applications requiring slight overload (up to 120%). It is suitable for motors with power rating up to 2.2kW/3hp for applications requiring significant overload (up to 150%). It works at a rated supply voltage from 380V to 480V AC. This variable speed / frequency drive (VSD / VFD) is specifically designed for industrial processes. In the following market segments, oil and gas, mining, minerals and metals, food and beverage water and wastewater. It offers high motor performance on any motor and total control of any kind of coupling in master/slave applications. Network services help ensure operation continuity even in case of connection breakdown. Web server and data logging help reduce downtime through fast troubleshooting and preventive maintenance. Its advanced connectivity, including EtherNet/IP and Modbus TCP, allows deep integration into automation architectures. It is designed to be mounted in vertical position (+/- 10 °) on a wall.
View AllClose