AI1, AI2, AI3 +/- 0.15 % of maximum value analog input || AQ1, AQ2 +/- 0.2 % analog output
Noise Level:
69.9 dB 86/188/EEC
Base Load Current At High Overload:
145.0 A
Shock Resistance:
15 gn 11 ms IEC 60068-2-27
Exchange Mode:
half duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP
With Safety Function Safe Stop 1 (Ss1):
TRUE
Discrete Output Number:
2
Maximum Output Voltage:
480.0 V
Acceleration And Deceleration Ramps:
linear adjustable separately from 0.01...9999 s
Maximum Acceleration Under Shock Impact (During Operation):
150 m/s² at 11 ms
Number Of Addresses:
1-247 Modbus serial
Type Of Polarization:
no impedance
Analogue Input Type:
AI1, AI2, AI3 software-configurable voltage 0...10 V DC 30 kOhm 12 bits || AI1, AI2, AI3 software-configurable current 0...20 mA/4...20 mA 250 Ohm 12 bits
Local Signalling:
local diagnostic 3 LED mono/dual colour) || embedded communication status 5 LED dual colour) || communication module status 2 LED dual colour) || presence of voltage 1 LED red)
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Product Destination:
asynchronous motors || synchronous motors
Relay Output Number:
3
Mercury Free:
Yes
Quantity Per Set:
1
Maximum Deflection Under Vibratory Load (During Operation):
1.5 mm at 2...13 Hz
Circularity Profile:
ENVEOLI1506002EN
Ambient Air Temperature For Storage:
-40-70 °C
Phase:
3 phase
With Safety Function Safely Limited Speed (Sls):
TRUE
Brake Chopper Integrated:
TRUE
Discrete Output Type:
logic output DQ+ 0-1 kHz <= 30 V DC 100 mA || programmable as pulse output DQ+ 0-30 kHz <= 30 V DC 20 mA || logic output DQ- 0-1 kHz <= 30 V DC 100 mA
Refresh Time:
relay output R1, R2, R3)5 ms +/- 0.5 ms)
Analogue Input Number:
3
Protection Type:
thermal protection motor || safe torque off motor || motor phase break motor || thermal protection drive || safe torque off drive || overheating drive || overcurrent between output phases and earth drive || overload of output voltage drive || short-c
Accuracy:
+/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input || +/- 1 % AQ1, AQ2 for a temperature variation 60 °C analog output
Depth:
375 mm
Net Weight:
87.7 kg
Data Format:
8 bits, configurable odd, even or no parity
Number Of Addresses:
1-247
With Sft Fct Safe Stop 2 (Ss2):
FALSE
Physical Interface:
Ethernet || 2-wire RS 485
Minimum Switching Current:
relay output R1, R2, R3 5 mA 24 V DC
Continuous Output Current:
173 A 2.5 kHz normal duty || 145 A 2.5 kHz heavy duty
Discrete Input Number:
10
Ip Degree Of Protection:
IP55
Mounting Mode:
wall mount
Regulation Loop:
adjustable PID regulator
Electrical Connection:
control screw terminal 0.5...1.5 mm² AWG 20...AWG 16 || line side screw terminal 95...120 mm² AWG 3/0...250 kcmil || DC bus screw terminal 95...120 mm² AWG 3/0...250 kcmil || motor screw terminal 120 mm² AWG 4/0...250 kcmil
Transmission Frame:
RTU
Marking:
CE
Upgradeability:
Upgraded components available
Width:
345 mm
Assembly Style:
enclosed
Sampling Duration:
2 ms +/- 0.5 ms DI1...DI8) - discrete input || 5 ms +/- 1 ms DI7, DI8) - pulse input || 1 ms +/- 1 ms AI1, AI2, AI3) - analog input || 5 ms +/- 1 ms AQ1, AQ2) - analog output
slot A communication module Profibus DP V1 || slot A communication module PROFINET || slot A communication module DeviceNet || slot A communication module EtherCAT || slot A communication module CANopen daisy chain RJ45 || slot A communication module
Type Of Polarization:
no impedance Modbus serial
Analogue Output Type:
software-configurable voltage AQ1, AQ2 0...10 V DC 470 Ohm 10 bits || software-configurable current AQ1, AQ2 0...20 mA 500 Ohm 10 bits
Operating Position:
vertical +/- 10 degree
With Safety Function Safe Programmable Logic:
FALSE
4 Quadrant Operation Possible:
TRUE
With Safety Function Safe Torque Off (Sto):
TRUE
Network Frequency:
50-60 Hz
Asynchronous Motor Control Profile:
variable torque standard || constant torque standard || optimized torque mode
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Motor Slip Compensation:
automatic whatever the load || not available in permanent magnet motor law || can be suppressed || adjustable
Height:
1250 mm
Maximum Output Frequency:
599 Hz
With Safety Function Safe Speed Monitor (Ssm):
FALSE
Switching Frequency:
1...8 kHz adjustable || 2.5...8 kHz with derating factor
Ambient Air Transport Temperature:
-40-70 °C
Maximum Switching Current:
relay output R1 resistive, cos phi = 1 3 A 250 V AC || relay output R1 resistive, cos phi = 1 3 A 30 V DC || relay output R1 inductive, cos phi = 0.4 7 ms 2 A 250 V AC || relay output R1 inductive, cos phi = 0.4 7 ms 2 A 30 V DC || relay output R2, R
With Safety Function Safely Limited Position (Slp):
FALSE
Supply:
external supply for digital inputs 24 V DC 19-30 V), <1.25 mA overload and short-circuit protection || internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 mA overload and short-circuit protection || internal supply for d
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Braking To Standstill:
by DC injection
With Safety Function Safe Direction (Sdi):
FALSE
Discrete Input Logic:
16 preset speeds
With Safety Function Safe Brake Management (Sbc/Sbt):
TRUE
Permitted Relative Humidity (During Operation):
class 3K5 according to EN 60721-3
Discrete Input Type:
DI1...DI8 programmable, 24 V DC <= 30 V)3.5 kOhm || DI7, DI8 programmable as pulse input 0-30 kHz, 24 V DC <= 30 V) || STOA, STOB safe torque off, 24 V DC <= 30 V)> 2.2 kOhm
[Us] Rated Supply Voltage:
380...480 V - 15...10 %
With Safety Function Safe Position (Sp):
FALSE
China Rohs Regulation:
X
Apparent Power:
112.9 kVA 480 V normal duty) || 98.2 kVA 480 V heavy duty)
