Schneider Electric ATV950U07N4U Atv950 Ip55 Ultype12 0,75Kw 400V/480V Va

SKU:

ATV950U07N4U

UPC:

3606481284211

MPN:

Condition:

New

Eu Rohs Directive:

Pro-active compliance (Product out of EU RoHS legal scope)

Emc Filter:

integrated || with EMC plate option

Option Card:

slot A communication module Profibus DP V1 || slot A communication module PROFINET || slot A communication module DeviceNet || slot A communication module EtherCAT || slot A communication module CANopen daisy chain RJ45 || slot A communication module

With Sft Fct Safe Stop 2 (Ss2):

FALSE

Assembly Style:

enclosed

California Proposition 65:

WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Acceleration And Deceleration Ramps:

linear adjustable separately from 0.01...9999 s

Discrete Output Type:

logic output DQ+ 0-1 kHz <= 30 V DC 100 mA || programmable as pulse output DQ+ 0-30 kHz <= 30 V DC 20 mA || logic output DQ- 0-1 kHz <= 30 V DC 100 mA

Discrete Input Logic:

positive logic (source) DI1...DI8), < 5 V, > 11 V || negative logic (sink) DI1...DI8), > 16 V, < 10 V || positive logic (source) DI7, DI8), < 0.6 V, > 2.5 V || positive logic (source) STOA, STOB), < 5 V, > 11 V

Relative Symmetric Network Frequency Tolerance:

0.05

Vibration Resistance:

1.5 mm peak to peak 2-13 Hz)IEC 60068-2-6 || 1 gn 13-200 Hz)IEC 60068-2-6

Shock Resistance:

15 gn 11 ms IEC 60068-2-27

With Safety Function Safe Position (Sp):

FALSE

Relative Humidity:

5-95 % without condensation IEC 60068-2-3

Discrete Input Logic:

16 preset speeds

Range Of Product:

Altivar Process ATV900

Analogue Output Type:

software-configurable voltage AQ1, AQ2 0...10 V DC 470 Ohm 10 bits || software-configurable current AQ1, AQ2 0...20 mA 500 Ohm 10 bits

Linearity Error:

AI1, AI2, AI3 +/- 0.15 % of maximum value analog input || AQ1, AQ2 +/- 0.2 % analog output

Product Certifications:

ABS || UL || ATEX INERIS || TÜV || DNV-GL || CSA || Bureau Veritas

Maximum Output Voltage:

480.0 V

Maximum Acceleration Under Shock Impact (During Operation):

150 m/s² at 11 ms

Maximum Transient Current:

2.6 A 60 s normal duty) || 2.3 A 60 s heavy duty)

Regulation Loop:

adjustable PID regulator

Phase:

3 phase

Discrete Output Number:

2

Pollution Degree:

2

Accuracy:

+/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input || +/- 1 % AQ1, AQ2 for a temperature variation 60 °C analog output

[Us] Rated Supply Voltage:

380...480 V - 15...10 %

Height:

678 mm

Number Of Addresses:

1-247

With Safety Function Safe Speed Monitor (Ssm):

FALSE

Reach Regulation:

Reference contains Substances of Very High Concern above the threshold

Operating Position:

vertical +/- 10 degree

Supply:

external supply for digital inputs 24 V DC 19-30 V), <1.25 mA overload and short-circuit protection || internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 mA overload and short-circuit protection || internal supply for d

Connector Type:

2 RJ45 || 1 RJ45

Ip Degree Of Protection:

IP55

Transmission Rate:

10, 100 Mbits || 4.8 kbps || 9600 bit/s || 19200 bit/s

With Safety Function Safe Torque Off (Sto):

TRUE

Method Of Access:

slave Modbus TCP

Electrical Connection:

control screw terminal 0.5...1.5 mm² AWG 20...AWG 16 || DC bus screw terminal 2.5...6 mm² AWG 14...AWG 10 || motor screw terminal 4...6 mm² AWG 12...AWG 10 || line side screw terminal 4...6 mm² AWG 12...AWG 10

Analogue Input Number:

3

Environmental Characteristic:

chemical pollution resistance class 3C3 IEC 60721-3-3 || dust pollution resistance class 3S3 IEC 60721-3-3

Data Format:

8 bits, configurable odd, even or no parity Modbus serial

4 Quadrant Operation Possible:

TRUE

Product Destination:

synchronous motors || asynchronous motors

Net Weight:

10.5 kg

Continuous Output Current:

2.2 A 4 kHz normal duty || 1.5 A 4 kHz heavy duty

Asynchronous Motor Control Profile:

constant torque standard || variable torque standard || optimized torque mode

Type Of Polarization:

no impedance

Brake Chopper Integrated:

TRUE

Environmental Disclosure:

ENVPEP1508009EN

Insulation Resistance:

> 1 MOhm 500 V DC for 1 minute to earth

Rohs Exemption Information:

Yes

Maximum Output Frequency:

599 Hz

Data Format:

8 bits, configurable odd, even or no parity

Synchronous Motor Control Profile:

permanent magnet motor || synchronous reluctance motor

Switching Frequency:

2...16 kHz adjustable || 4...16 kHz with derating factor

Relay Output Type:

configurable relay logic R1 fault relay NO/NC 100000 cycles || configurable relay logic R2 sequence relay NO 1000000 cycles || configurable relay logic R3 sequence relay NO 1000000 cycles

Discrete Input Number:

10

Upgradeability:

Upgraded components available

Maximum Deflection Under Vibratory Load (During Operation):

1.5 mm at 2...13 Hz

Environmental Class (During Operation):

class 3C3 according to IEC 60721-3-3 || class 3S3 according to IEC 60721-3-3

Variant:

standard version || with braking chopper

Mounting Mode:

wall mount

Line Current:

1.5 A 380 V normal duty) || 0.9 A 380 V heavy duty) || 1.3 A 480 V normal duty) || 0.8 A 480 V heavy duty)

Local Signalling:

local diagnostic 3 LED mono/dual colour) || embedded communication status 5 LED dual colour) || communication module status 2 LED dual colour) || presence of voltage 1 LED red)

Ambient Air Transport Temperature:

-40-70 °C

Product Or Component Type:

variable speed drive

Base Load Current At Low Overload:

2.2 A

With Safety Function Safe Brake Management (Sbc/Sbt):

TRUE

Base Load Current At High Overload:

1.5 A

Number Of Addresses:

1-247 Modbus serial

With Safety Function Safe Operating Stop (Sos):

FALSE

Braking To Standstill:

by DC injection

Noise Level:

52 dB

Sustainable Offer Status:

Green Premium product

Motor Slip Compensation:

automatic whatever the load || adjustable || can be suppressed || not available in permanent magnet motor law

With Safety Function Safe Programmable Logic:

FALSE

Transmission Frame:

RTU

Maximum Switching Current:

relay output R1 resistive, cos phi = 1 3 A 250 V AC || relay output R1 resistive, cos phi = 1 3 A 30 V DC || relay output R1 inductive, cos phi = 0.4 7 ms 2 A 250 V AC || relay output R1 inductive, cos phi = 0.4 7 ms 2 A 30 V DC || relay output R2, R

Circularity Profile:

ENVEOLI1508009EN

Mercury Free:

Yes

Device Application:

Industrial Application

Maximum Thdi:

<48 % full load IEC 61000-3-12

Marking:

CE

Discrete Input Type:

DI1...DI8 programmable, 24 V DC <= 30 V)3.5 kOhm || DI7, DI8 programmable as pulse input 0-30 kHz, 24 V DC <= 30 V) || STOA, STOB safe torque off, 24 V DC <= 30 V)> 2.2 kOhm

Permitted Relative Humidity (During Operation):

class 3K5 according to EN 60721-3

Width:

264 mm

Overvoltage Category:

III

Physical Interface:

Ethernet || 2-wire RS 485

Protection Type:

thermal protection motor || safe torque off motor || motor phase break motor || thermal protection drive || safe torque off drive || overheating drive || overcurrent between output phases and earth drive || overload of output voltage drive || short-c

Motor Power Kw:

0.75 kW normal duty || 0.37 kW heavy duty

Analogue Output Number:

2

Ambient Air Temperature For Storage:

-40-70 °C

Ambient Air Temperature For Operation:

-15-40 °C without derating) || 40-50 °C with derating factor)

Input Compatibility:

DI1...DI8 discrete input level 1 PLC IEC 61131-2 || DI7, DI8 pulse input level 1 PLC IEC 65A-68 || STOA, STOB discrete input level 1 PLC IEC 61131-2

Communication Port Protocol:

EtherNet/IP || Modbus serial || Modbus TCP

Analogue Input Type:

AI1, AI2, AI3 software-configurable voltage 0...10 V DC 30 kOhm 12 bits || AI1, AI2, AI3 software-configurable current 0...20 mA/4...20 mA 250 Ohm 12 bits

Quantity Per Set:

1

Depth:

272 mm

Degree Of Protection:

UL type 12

Product Specific Application:

process for industrial

With Safety Function Safely Limited Speed (Sls):

TRUE

Nominal Switching Frequency:

4 kHz

Prospective Line Isc:

50 kA

Transmission Rate:

10/100 Mbit/s Ethernet IP/Modbus TCP || 4.8, 9.6, 19.2, 38.4 kbit/s Modbus serial

Isolation:

between power and control terminals

Apparent Power:

1.1 kVA 480 V normal duty) || 0.7 kVA 480 V heavy duty)

With Safety Function Safe Direction (Sdi):

FALSE

China Rohs Regulation:

X

Standards:

UL 508C || IEC 61800-3 || IEC 61800-5-1 || IEC 61000-3-12 || IEC 60721-3 || IEC 61508 || IEC 13849-1

Exchange Mode:

half duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP

Refresh Time:

relay output R1, R2, R3)5 ms +/- 0.5 ms)

Weee:

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.

Maximum Acceleration Under Vibrational Stress (During Operation):

10 m/s² at 13...200 Hz

Type Of Polarization:

no impedance Modbus serial

Network Frequency:

50-60 Hz

Relay Output Number:

3

Noise Level:

52 dB 86/188/EEC

With Safety Function Safe Stop 1 (Ss1):

TRUE

With Safety Function Safely Limited Position (Slp):

FALSE

Minimum Switching Current:

relay output R1, R2, R3 5 mA 24 V DC

Electromagnetic Compatibility:

electrostatic discharge immunity test level 3 IEC 61000-4-2 || radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3 || electrical fast transient/burst immunity test level 4 IEC 61000-4-4 || 1.2/50 µs - 8/20 µs surge immu

Sampling Duration:

2 ms +/- 0.5 ms DI1...DI8) - discrete input || 5 ms +/- 1 ms DI7, DI8) - pulse input || 1 ms +/- 1 ms AI1, AI2, AI3) - analog input || 5 ms +/- 1 ms AQ1, AQ2) - analog output

Operating Altitude:

<= 3280.84 ft (1000 m) without derating || 1000...4800 m with current derating 1 % per 100 m