Schneider Electric BCH2MM0812CA6C 130Mm 850W 20Bit E. Oil S. Mil
SKU:
BCH2MM0812CA6C
UPC:
3606480733925
MPN:
Condition:
New
Device Short Name:
BCH2
Distance Shaft Shoulder-Flange:
8 mm
Mounting Holes Diameter:
9.2 mm
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Shaft Diameter:
22 mm
Product Compatibility:
LXM28... servo drive 0.85 kW, 220 V, single phase || LXM28... servo drive 0.85 kW, 220 V, three phase
Nominal Torque:
5.39 N.m LXM28... 7 A, 220 V, single phase || 5.39 N.m LXM28... 7 A, 220 V, three phase
Nominal Output Power:
850 W LXM28... 7 A, 220 V, single phase || 850 W LXM28... 7 A, 220 V, three phase
Reach Free Of Svhc:
Yes
Continuous Stall Torque:
5.39 N.m LXM28... 7 A, 220 V, single phase || 5.39 N.m LXM28... 7 A, 220 V, three phase
Phase:
single phase || three phase
Nominal Speed:
1500 rpm LXM28... 7 A, 220 V, single phase || 1500 rpm LXM28... 7 A, 220 V, three phase
Circularity Profile:
ENVEOLI1504002EN
Holding Brake:
without
Range Compatibility:
Lexium 28
Number Of Motor Stacks:
4
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Feedback Type:
20 bits single turn absolute encoder
Maximum Mechanical Speed:
3000 rpm
Brake Pull-In Power:
19.7 W
Back Emf Constant:
58 V/krpm 20 °C
Torque Constant:
0.96 N.m/A 20 °C
Rotor Inertia:
13.5 kg.cm²
Ambient Air Temperature For Operation:
-20-40 °C
Mercury Free:
Yes
Stator Electrical Time Constant:
13.24 ms 20 °C
Stator Inductance:
4.5 mH 20 °C
Number Of Mounting Holes:
4
Net Weight:
9.6 kg
Centring Collar Depth:
8 mm
[Us] Rated Supply Voltage:
220 V
Type Of Cooling:
natural convection
Shaft End:
smooth shaft
Peak Stall Torque:
13.8 N.m LXM28... 7 A, 220 V, single phase || 13.8 N.m LXM28... 7 A, 220 V, three phase
Reach Regulation:
Free of Substances of Very High Concern above the threshold
Continuous Power:
850 W
Continuous Stall Current:
5.62 A
Rohs Exemption Information:
Yes
Stator Resistance:
0.34 Ohm 20 °C
Maximum Radial Force Fr:
670 N 1500 rpm
Maximum Axial Force Fa:
200 N
Electrical Connection:
connector MIL
Product Or Component Type:
servo motor
Shaft Length:
55 mm
Maximum Permanent Current:
6.29 A
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
