Schneider Electric BCH2MM1022CA6C 130Mm 1000W 20Bit E. Oil S. Mil
SKU:
BCH2MM1022CA6C
UPC:
3606480734243
MPN:
Condition:
New
Stator Inductance:
7.4 mH 20 °C
Maximum Permanent Current:
6.29 A
Shaft Length:
55 mm
Torque Constant:
0.83 N.m/A 20 °C
Maximum Radial Force Fr:
670 N 2000 rpm
Holding Brake:
without
Peak Stall Torque:
14.3 N.m LXM28... 7 A, 220 V, single phase || 14.3 N.m LXM28... 7 A, 220 V, three phase
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
[Us] Rated Supply Voltage:
220 V
Distance Shaft Shoulder-Flange:
8 mm
Shaft End:
smooth shaft
Rohs Exemption Information:
Yes
Circle Diameter Of The Mounting Holes:
145 mm
Reach Regulation:
Free of Substances of Very High Concern above the threshold
Environmental Disclosure:
ENVPEP1504002EN
Maximum Current Irms:
19.64 A LXM28... 1 kW, 220 V
Continuous Power:
1000 W
Centring Collar Depth:
8 mm
China Rohs Regulation:
X
Maximum Axial Force Fa:
200 N
Sustainable Offer Status:
Green Premium product
Mounting Support:
asian standard flange
Circularity Profile:
ENVEOLI1504002EN
Stator Resistance:
0.62 Ohm 20 °C
Nominal Speed:
2000 rpm LXM28... 7 A, 220 V, single phase || 2000 rpm LXM28... 7 A, 220 V, three phase
Mounting Holes Diameter:
9.2 mm
Range Compatibility:
Lexium 28
Product Or Component Type:
servo motor
Net Weight:
7 kg
Device Short Name:
BCH2
Length:
147 mm
Nominal Torque:
4.77 N.m LXM28... 7 A, 220 V, single phase || 4.77 N.m LXM28... 7 A, 220 V, three phase
Type Of Cooling:
natural convection
Shaft Diameter:
22 mm
Centring Collar Diameter:
110 mm
Continuous Stall Torque:
4.77 N.m LXM28... 7 A, 220 V, single phase || 4.77 N.m LXM28... 7 A, 220 V, three phase
Feedback Type:
20 bits single turn absolute encoder
Electrical Connection:
connector MIL
Phase:
single phase || three phase
Maximum Mechanical Speed:
3000 rpm
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Reach Free Of Svhc:
Yes
Mercury Free:
Yes
Stator Electrical Time Constant:
11.94 ms 20 °C
Motor Flange Size:
130 mm
Number Of Mounting Holes:
4
Product Compatibility:
LXM28... servo drive 1 kW, 220 V, single phase || LXM28... servo drive 1 kW, 220 V, three phase
Continuous Stall Current:
5.77 A
Ambient Air Temperature For Operation:
-20-40 °C
Nominal Output Power:
1000 W LXM28... 7 A, 220 V, single phase || 1000 W LXM28... 7 A, 220 V, three phase
Number Of Motor Stacks:
1
Brake Pull-In Power:
19.7 W
Ip Degree Of Protection:
IP50 IM V3 || IP65 IM B5, IM V1
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
