Schneider Electric BCH2MM1023CF6C 130Mm 1000W 20Bit E. Oil S. Key Brk Mil
$1,540.39
Schneider Electric
Schneider Electric BCH2MM1022CF6C 130Mm 1000W 20Bit E. Oil S. Brk Mil
Schneider Electric
$3,465.90
(No reviews yet)
Write a Review
Write a Review
Schneider Electric
Schneider Electric BCH2MM1022CF6C 130Mm 1000W 20Bit E. Oil S. Brk Mil
servo motor BCH, Lexium 28, 130mm, 1000W, with oil seal, smooth, brake, straight connection
- Holding Brake:
- with
- Ip Degree Of Protection:
- IP50 IM V3 || IP65 IM B5, IM V1
- Maximum Mechanical Speed:
- 3000 rpm
- Feedback Type:
- 20 bits single turn absolute encoder
- Stator Electrical Time Constant:
- 11.94 ms 20 °C
- Back Emf Constant:
- 50 V/krpm 20 °C
- Sustainable Offer Status:
- Green Premium product
- Product Compatibility:
- LXM28... servo drive 1 kW, 220 V, single phase || LXM28... servo drive 1 kW, 220 V, three phase
- Peak Stall Torque:
- 14.3 N.m LXM28... 7 A, 220 V, single phase || 14.3 N.m LXM28... 7 A, 220 V, three phase
- Phase:
- single phase || three phase
- Device Short Name:
- BCH2
- Stator Resistance:
- 0.62 Ohm 20 °C
- Number Of Motor Stacks:
- 1
- Shaft Length:
- 55 mm
- Nominal Output Power:
- 1000 W LXM28... 7 A, 220 V, single phase || 1000 W LXM28... 7 A, 220 V, three phase
- Reach Free Of Svhc:
- Yes
- Ambient Air Temperature For Operation:
- 0-40 °C
- Circularity Profile:
- ENVEOLI1504002EN
- Continuous Stall Torque:
- 4.77 N.m LXM28... 7 A, 220 V, single phase || 4.77 N.m LXM28... 7 A, 220 V, three phase
- Distance Shaft Shoulder-Flange:
- 8 mm
- Motor Flange Size:
- 130 mm
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Continuous Power:
- 1000 W
- Holding Torque:
- 9.6 N.m built-in
- Mercury Free:
- Yes
- Type Of Cooling:
- natural convection
- Circle Diameter Of The Mounting Holes:
- 145 mm
- Shaft End:
- smooth shaft
- Product Or Component Type:
- servo motor
- Range Compatibility:
- Lexium 28
- Shaft Diameter:
- 22 mm
- Centring Collar Depth:
- 8 mm
- Nominal Speed:
- 2000 rpm LXM28... 7 A, 220 V, single phase || 2000 rpm LXM28... 7 A, 220 V, three phase
- Stator Inductance:
- 7.4 mH 20 °C
- [Us] Rated Supply Voltage:
- 220 V
- Maximum Axial Force Fa:
- 200 N
- Length:
- 183 mm
- Rotor Inertia:
- 6.91 kg.cm²
- Continuous Stall Current:
- 5.77 A
- Torque Constant:
- 0.83 N.m/A 20 °C
- Maximum Radial Force Fr:
- 670 N 2000 rpm
- Maximum Current Irms:
- 19.64 A LXM28... 1 kW, 220 V
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Net Weight:
- 8.2 kg
- Maximum Permanent Current:
- 6.29 A
- Electrical Connection:
- connector MIL
- Number Of Mounting Holes:
- 4
- Brake Pull-In Power:
- 19.7 W
- Reach Regulation:
- Free of Substances of Very High Concern above the threshold
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Mounting Holes Diameter:
- 9.2 mm
- Centring Collar Diameter:
- 110 mm
- Mounting Support:
- asian standard flange
- China Rohs Regulation:
- X
- Environmental Disclosure:
- ENVPEP1504002EN
- Rohs Exemption Information:
- Yes
- Nominal Torque:
- 4.77 N.m LXM28... 7 A, 220 V, single phase || 4.77 N.m LXM28... 7 A, 220 V, three phase
- Catalog:
- View
- Datasheet:
- View
