Schneider Electric BCH2MM1023CF6C 130Mm 1000W 20Bit E. Oil S. Key Brk Mil
SKU:
BCH2MM1023CF6C
UPC:
3.60648E+12
MPN:
Condition:
New
Mounting Support:
asian standard flange
Motor Flange Size:
130 mm
Stator Inductance:
7.4 mH 20 °C
Maximum Current Irms:
19.64 A LXM28... 1 kW, 220 V
Maximum Radial Force Fr:
670 N 2000 rpm
Ip Degree Of Protection:
IP50 IM V3 || IP65 IM B5, IM V1
Circle Diameter Of The Mounting Holes:
145 mm
Nominal Torque:
4.77 N.m LXM26D 7 A, 220 V, single phase || 4.77 N.m LXM26D 7 A, 220 V, three phase || 4.77 N.m LXM28... 7 A, 220 V, single phase || 4.77 N.m LXM28... 7 A, 220 V, three phase
Maximum Mechanical Speed:
3000 rpm
[Us] Rated Supply Voltage:
220 V
Reach Regulation:
Free of Substances of Very High Concern above the threshold
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Circularity Profile:
ENVEOLI1504002EN
Product Or Component Type:
servo motor
Nominal Output Power:
1000 W LXM26D 7 A, 220 V, single phase || 1000 W LXM26D 7 A, 220 V, three phase || 1000 W LXM28... 7 A, 220 V, single phase || 1000 W LXM28... 7 A, 220 V, three phase
Holding Torque:
9.6 N.m built-in
Peak Stall Torque:
14.3 N.m LXM26D 7 A, 220 V, single phase || 14.3 N.m LXM26D 7 A, 220 V, three phase || 14.3 N.m LXM28... 7 A, 220 V, single phase || 14.3 N.m LXM28... 7 A, 220 V, three phase
Shaft Diameter:
22 mm
Sustainable Offer Status:
Green Premium product
Mounting Holes Diameter:
9.2 mm
Electrical Connection:
connector MIL
Number Of Mounting Holes:
4
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Stator Resistance:
0.62 Ohm 20 °C
Maximum Permanent Current:
6.29 A
Stator Electrical Time Constant:
11.94 ms 20 °C
Nominal Speed:
2000 rpm LXM26D 7 A, 220 V, single phase || 2000 rpm LXM26D 7 A, 220 V, three phase || 2000 rpm LXM28... 7 A, 220 V, single phase || 2000 rpm LXM28... 7 A, 220 V, three phase
Centring Collar Depth:
8 mm
Phase:
three phase || single phase
Product Compatibility:
LXM26D servo drive 1 kW, 220 V, single phase || LXM26D servo drive 1 kW, 220 V, three phase || LXM28... servo drive 1 kW, 220 V, single phase || LXM28... servo drive 1 kW, 220 V, three phase
Centring Collar Diameter:
110 mm
Net Weight:
8.2 kg
Ambient Air Temperature For Operation:
0-40 °C
Shaft End:
keyed
Type Of Cooling:
natural convection
Back Emf Constant:
50 V/krpm 20 °C
Rohs Exemption Information:
Yes
Number Of Motor Stacks:
1
Key Width:
8 mm
Continuous Stall Current:
5.77 A
Pvc Free:
Yes
Device Short Name:
BCH2
Shaft Length:
55 mm
Continuous Power:
1000 W
Length:
183 mm
Rotor Inertia:
6.91 kg.cm²
Distance Shaft Shoulder-Flange:
8 mm
Feedback Type:
20 bits single turn absolute encoder
Maximum Axial Force Fa:
200 N
Brake Pull-In Power:
19.7 W
Reach Free Of Svhc:
Yes
Holding Brake:
with
China Rohs Regulation:
X
Range Compatibility:
Lexium 28
Continuous Stall Torque:
4.77 N.m LXM26D 7 A, 220 V, single phase || 4.77 N.m LXM26D 7 A, 220 V, three phase || 4.77 N.m LXM28... 7 A, 220 V, single phase || 4.77 N.m LXM28... 7 A, 220 V, three phase
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
This product is part of the Lexium 28 range, an offer of motion servo drives for machines from 0.05 to 4.5kW. The brushless servo motor features a high moment of inertia with maximum mechanical speed...
This product is part of the Lexium 28 range, an offer of servo motors from 0.05kW to 4.5kW. The servo motor features maximum mechanical speed of 3000RPM and keyed shaft end with holding brake. It is...
