Schneider Electric BMH0701P02F2A Motor 70Mm Iec 1,4Nm Ip54 750W No Key
SKU:
BMH0701P02F2A
UPC:
3.60649E+12
MPN:
Condition:
New
Mounting Holes Diameter:
5.5 mm
Number Of Motor Poles:
10
Net Weight:
2.6 kg
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Shaft Length:
23 mm
Pvc Free:
Yes
Maximum Mechanical Speed:
8000 rpm
Warranty:
18 months
Shaft Diameter:
11 mm
Sustainable Offer Status:
Green Premium product
Product Or Component Type:
servo motor
Holding Brake:
with
Electrical Connection:
rotatable right-angled connectors
Rotor Inertia:
0.7 kg.cm²
Feedback Type:
multiturn SinCos Hiperface
China Rohs Regulation:
X
[Us] Rated Supply Voltage:
480 V
Speed Feedback Resolution:
131072 points/turn x 4096 turns
Device Short Name:
BMH
Nominal Torque:
1.1 N.m LXM32.U60N4 1.5 A, 400 V, three phase || 1.1 N.m LXM32.U60N4 1.5 A, 480 V, three phase || 1.3 N.m LXM32.D12N4 3 A, 400 V, three phase || 1.3 N.m LXM32.D12N4 3 A, 480 V, three phase
Peak Stall Torque:
4.2 N.m LXM32.U60N4 1.5 A, 400 V, three phase || 4.2 N.m LXM32.U60N4 1.5 A, 480 V, three phase || 4.2 N.m LXM32.D12N4 3 A, 400 V, three phase || 4.2 N.m LXM32.D12N4 3 A, 480 V, three phase
Maximum Permanent Current:
5.97 A
Centring Collar Diameter:
60 mm
Continuous Stall Current:
1.78 A
Type Of Cooling:
natural convection
Maximum Current Irms:
6 A LXM32.U60N4 || 6 A LXM32.D12N4
Holding Torque:
3 N.m holding brake
Mounting Support:
international standard flange
Ip Degree Of Protection:
IP54 standard
Maximum Axial Force Fa:
0.2 x Fr
Environmental Disclosure:
ENVPEP111002EN
Stator Resistance:
8.3 Ohm 20 °C
Number Of Motor Stacks:
1
Centring Collar Depth:
2.5 mm
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Phase:
three phase
Mercury Free:
Yes
Stator Electrical Time Constant:
2.8 ms 20 °C
Circle Diameter Of The Mounting Holes:
82 mm
Second Shaft:
without second shaft end
Nominal Speed:
3000 rpm LXM32.U60N4 1.5 A, 400 V, three phase || 3000 rpm LXM32.U60N4 1.5 A, 480 V, three phase || 5000 rpm LXM32.D12N4 3 A, 400 V, three phase || 5000 rpm LXM32.D12N4 3 A, 480 V, three phase
Product Compatibility:
LXM32.U60N4 400...480 V three phase || LXM32.D12N4 400...480 V three phase
Nominal Output Power:
350 W LXM32.U60N4 1.5 A, 400 V, three phase || 350 W LXM32.U60N4 1.5 A, 480 V, three phase || 700 W LXM32.D12N4 3 A, 400 V, three phase || 700 W LXM32.D12N4 3 A, 480 V, three phase
Motor Flange Size:
70 mm
Maximum Radial Force Fr:
660 N 1000 rpm || 520 N 2000 rpm || 460 N 3000 rpm || 410 N 4000 rpm || 380 N 5000 rpm || 360 N 6000 rpm
Range Compatibility:
Lexium 32
Circularity Profile:
N/A
Back Emf Constant:
50.72 V/krpm 120 °C
Stator Inductance:
23.4 mH 20 °C
Continuous Power:
1.05 W
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Torque Constant:
0.79 N.m/A 120 °C
Number Of Mounting Holes:
4
Continuous Stall Torque:
1.2 N.m LXM32.U60N4 1.5 A, 400 V, three phase || 1.2 N.m LXM32.U60N4 1.5 A, 480 V, three phase || 1.4 N.m LXM32.D12N4 3 A, 400 V, three phase || 1.4 N.m LXM32.D12N4 3 A, 480 V, three phase
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
This product is part of the Lexium 32 range, an offer of motion servo drives for machines from 0.15kW to 7kW. The 10-pole servo motor features a medium moment of inertia with maximum mechanical speed...
This product is part of the Lexium 32 range, an offer of servo motors from 0.15kW to 11kW. The 10-pole servo motor features maximum mechanical speed of 8000RPM and smooth shaft end without holding...
This product is part of the Lexium 32 range, an offer of servo motors from 0.15kW to 11kW. The 10-pole servo motor features maximum mechanical speed of 8000RPM and smooth shaft end with holding brake...