Schneider Electric BMH0701P07F1A Motor 70Mm Iec 1,4Nm Ip54 750W No Key
SKU:
BMH0701P07F1A
UPC:
3606485193403
MPN:
Condition:
New
Peak Stall Torque:
4.2 N.m LXM32.U60N4 1.5 A, 400 V, three phase || 4.2 N.m LXM32.U60N4 1.5 A, 480 V, three phase || 4.2 N.m LXM32.D12N4 3 A, 400 V, three phase || 4.2 N.m LXM32.D12N4 3 A, 480 V, three phase
Rohs Exemption Information:
Yes
Maximum Mechanical Speed:
8000 rpm
Stator Resistance:
8.3 Ohm 20 °C
Brake Pull-In Power:
7 W
Nominal Output Power:
350 W LXM32.U60N4 1.5 A, 400 V, three phase || 350 W LXM32.U60N4 1.5 A, 480 V, three phase || 700 W LXM32.D12N4 3 A, 400 V, three phase || 700 W LXM32.D12N4 3 A, 480 V, three phase
Number Of Mounting Holes:
4
Circularity Profile:
N/A
Maximum Axial Force Fa:
0.2 x Fr
Maximum Permanent Current:
5.97 A
Nominal Torque:
1.1 N.m LXM32.U60N4 1.5 A, 400 V, three phase || 1.1 N.m LXM32.U60N4 1.5 A, 480 V, three phase || 1.3 N.m LXM32.D12N4 3 A, 400 V, three phase || 1.3 N.m LXM32.D12N4 3 A, 480 V, three phase
Torque Constant:
0.79 N.m/A 120 °C
Nominal Speed:
3000 rpm LXM32.U60N4 1.5 A, 400 V, three phase || 3000 rpm LXM32.U60N4 1.5 A, 480 V, three phase || 5000 rpm LXM32.D12N4 3 A, 400 V, three phase || 5000 rpm LXM32.D12N4 3 A, 480 V, three phase
Range Compatibility:
Lexium 32
Stator Electrical Time Constant:
2.8 ms 20 °C
Rotor Inertia:
0.7 kg.cm²
Shaft End:
smooth shaft
Speed Feedback Resolution:
32768 points/turn x 4096 turns
Environmental Disclosure:
ENVPEP111002EN
Circle Diameter Of The Mounting Holes:
82 mm
Shaft Length:
23 mm
Centring Collar Diameter:
60 mm
Product Compatibility:
LXM32.U60N4 400...480 V three phase || LXM32.D12N4 400...480 V three phase
Length:
161 mm
Ip Degree Of Protection:
IP54 standard
Mounting Support:
international standard flange
Warranty:
18 months
Electrical Connection:
straight connectors
Holding Torque:
3 N.m holding brake
Type Of Cooling:
natural convection
Continuous Stall Current:
1.78 A
Number Of Motor Poles:
10
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Maximum Current Irms:
6 A LXM32.U60N4 || 6 A LXM32.D12N4
Mercury Free:
Yes
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Pvc Free:
Yes
Holding Brake:
with
Maximum Radial Force Fr:
660 N 1000 rpm || 520 N 2000 rpm || 460 N 3000 rpm || 410 N 4000 rpm || 380 N 5000 rpm || 360 N 6000 rpm
Centring Collar Depth:
2.5 mm
Motor Flange Size:
70 mm
Number Of Motor Stacks:
1
Back Emf Constant:
50.72 V/krpm 120 °C
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Second Shaft:
without second shaft end
Sustainable Offer Status:
Green Premium product
Feedback Type:
multiturn SinCos Hiperface
Continuous Stall Torque:
1.2 N.m LXM32.U60N4 1.5 A, 400 V, three phase || 1.2 N.m LXM32.U60N4 1.5 A, 480 V, three phase || 1.4 N.m LXM32.D12N4 3 A, 400 V, three phase || 1.4 N.m LXM32.D12N4 3 A, 480 V, three phase
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
This product is part of the Lexium 32 range, an offer of motion servo drives for machines from 0.15kW to 7kW. The 10-pole servo motor features a medium moment of inertia with maximum mechanical speed...
This product is part of the Lexium 32 range, an offer of servo motors from 0.15kW to 11kW. The 10-pole servo motor features maximum mechanical speed of 8000RPM and smooth shaft end without holding...
