Schneider Electric BMH0701P12A2A Motor 70Mm Iec 1,4Nm Ip54 750W Key Enc.
SKU:
BMH0701P12A2A
UPC:
3.60649E+12
MPN:
Condition:
New
Product Compatibility:
LXM32.U60N4 400...480 V three phase || LXM32.D12N4 400...480 V three phase
Pvc Free:
Yes
Centring Collar Diameter:
60 mm
Rohs Exemption Information:
Yes
Maximum Axial Force Fa:
0.2 x Fr
Maximum Permanent Current:
5.97 A
Torque Constant:
0.79 N.m/A 120 °C
Key Width:
18 mm
Continuous Stall Current:
1.78 A
Number Of Mounting Holes:
4
Mercury Free:
Yes
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Ip Degree Of Protection:
IP54 standard
Stator Resistance:
8.3 Ohm 20 °C
Length:
122 mm
Electrical Connection:
rotatable right-angled connectors
Nominal Output Power:
350 W LXM32.U60N4 1.5 A, 400 V, three phase || 350 W LXM32.U60N4 1.5 A, 480 V, three phase || 700 W LXM32.D12N4 3 A, 400 V, three phase || 700 W LXM32.D12N4 3 A, 480 V, three phase
Shaft End:
keyed
Circle Diameter Of The Mounting Holes:
82 mm
Environmental Disclosure:
ENVPEP111002EN
Nominal Speed:
3000 rpm LXM32.U60N4 1.5 A, 400 V, three phase || 3000 rpm LXM32.U60N4 1.5 A, 480 V, three phase || 5000 rpm LXM32.D12N4 3 A, 400 V, three phase || 5000 rpm LXM32.D12N4 3 A, 480 V, three phase
Range Compatibility:
Lexium 32
Back Emf Constant:
50.72 V/krpm 120 °C
Type Of Cooling:
natural convection
Maximum Radial Force Fr:
660 N 1000 rpm || 520 N 2000 rpm || 460 N 3000 rpm || 410 N 4000 rpm || 380 N 5000 rpm || 360 N 6000 rpm
Holding Brake:
without
[Us] Rated Supply Voltage:
480 V
Number Of Motor Stacks:
1
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Shaft Diameter:
11 mm
Peak Stall Torque:
4.2 N.m LXM32.U60N4 1.5 A, 400 V, three phase || 4.2 N.m LXM32.U60N4 1.5 A, 480 V, three phase || 4.2 N.m LXM32.D12N4 3 A, 400 V, three phase || 4.2 N.m LXM32.D12N4 3 A, 480 V, three phase
China Rohs Regulation:
X
Net Weight:
1.6 kg
Stator Inductance:
23.4 mH 20 °C
Feedback Type:
multiturn SinCos Hiperface
Nominal Torque:
1.1 N.m LXM32.U60N4 1.5 A, 400 V, three phase || 1.1 N.m LXM32.U60N4 1.5 A, 480 V, three phase || 1.3 N.m LXM32.D12N4 3 A, 400 V, three phase || 1.3 N.m LXM32.D12N4 3 A, 480 V, three phase
Warranty:
18 months
Circularity Profile:
N/A
Phase:
three phase
Rotor Inertia:
0.59 kg.cm²
Continuous Power:
1.05 W
Speed Feedback Resolution:
131072 points/turn x 4096 turns
Number Of Motor Poles:
10
Maximum Current Irms:
6 A LXM32.U60N4 || 6 A LXM32.D12N4
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Mounting Holes Diameter:
5.5 mm
Continuous Stall Torque:
1.2 N.m LXM32.U60N4 1.5 A, 400 V, three phase || 1.2 N.m LXM32.U60N4 1.5 A, 480 V, three phase || 1.4 N.m LXM32.D12N4 3 A, 400 V, three phase || 1.4 N.m LXM32.D12N4 3 A, 480 V, three phase
Device Short Name:
BMH
Stator Electrical Time Constant:
2.8 ms 20 °C
Shaft Length:
23 mm
Centring Collar Depth:
2.5 mm
Mounting Support:
international standard flange
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
This product is part of the Lexium 32 range, an offer of motion servo drives for machines from 0.15kW to 7kW. The 10-pole servo motor features a medium moment of inertia with maximum mechanical speed...
This product is part of the Lexium 32 range, an offer of servo motors from 0.15kW to 11kW. The 10-pole servo motor features maximum mechanical speed of 8000RPM and smooth shaft end without holding...
