Schneider Electric BMH0701T16A2A Motor 70Mm Iec 1,4Nm Ip54 690W Key Enc.
SKU:
BMH0701T16A2A
UPC:
3.60649E+12
MPN:
Condition:
New
Continuous Stall Torque:
1.4 N.m LXM32.U90M2 3 A, 230 V, single phase || 1.4 N.m LXM32.D18M2 6 A, 115 V, single phase
Mounting Holes Diameter:
5.5 mm
Length:
122 mm
Type Of Cooling:
natural convection
Centring Collar Depth:
2.5 mm
Key Width:
18 mm
Number Of Motor Poles:
10
Stator Inductance:
9.1 mH 20 °C
Stator Electrical Time Constant:
2.8 ms 20 °C
Shaft Diameter:
11 mm
Maximum Radial Force Fr:
660 N 1000 rpm || 520 N 2000 rpm || 460 N 3000 rpm || 410 N 4000 rpm || 380 N 5000 rpm || 360 N 6000 rpm
Holding Brake:
without
Shaft End:
keyed
Circle Diameter Of The Mounting Holes:
82 mm
Second Shaft:
without second shaft end
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Continuous Power:
1.05 W
Environmental Disclosure:
ENVPEP111002EN
Mounting Support:
international standard flange
Stator Resistance:
3.2 Ohm 20 °C
Maximum Permanent Current:
9.56 A
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Sustainable Offer Status:
Green Premium product
Nominal Speed:
4000 rpm LXM32.U90M2 3 A, 230 V, single phase || 2500 rpm LXM32.D18M2 6 A, 115 V, single phase
Product Compatibility:
LXM32.D18M2 115 V single phase || LXM32.U90M2 230 V single phase
Warranty:
18 months
Circularity Profile:
N/A
Device Short Name:
BMH
Speed Feedback Resolution:
32768 points/turn
Mercury Free:
Yes
Back Emf Constant:
31.17 V/krpm 120 °C
Net Weight:
1.6 kg
Maximum Current Irms:
9.6 A LXM32.D18M2 || 9.6 A LXM32.U90M2
Pvc Free:
Yes
Range Compatibility:
Lexium 32
Number Of Motor Stacks:
1
Maximum Mechanical Speed:
8000 rpm
Product Or Component Type:
servo motor
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Peak Stall Torque:
4 N.m LXM32.U90M2 3 A, 230 V, single phase || 4.2 N.m LXM32.D18M2 6 A, 115 V, single phase
Electrical Connection:
rotatable right-angled connectors
Motor Flange Size:
70 mm
Centring Collar Diameter:
60 mm
Number Of Mounting Holes:
4
Shaft Length:
23 mm
Nominal Output Power:
450 W LXM32.U90M2 3 A, 230 V, single phase || 350 W LXM32.D18M2 6 A, 115 V, single phase
China Rohs Regulation:
X
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Ip Degree Of Protection:
IP54 standard
Feedback Type:
single turn SinCos Hiperface
Rohs Exemption Information:
Yes
Maximum Axial Force Fa:
0.2 x Fr
Rotor Inertia:
0.59 kg.cm²
Torque Constant:
0.49 N.m/A 120 °C
Continuous Stall Current:
2.85 A
Phase:
three phase
Nominal Torque:
1.1 N.m LXM32.U90M2 3 A, 230 V, single phase || 1.35 N.m LXM32.D18M2 6 A, 115 V, single phase
This product is part of the Lexium 32 range, an offer of motion servo drives for machines from 0.15kW to 7kW. The 10-pole servo motor features a medium moment of inertia with maximum mechanical speed...
This product is part of the Lexium 32 range, an offer of servo motors from 0.15kW to 11kW. The 10-pole servo motor features maximum mechanical speed of 8000RPM and smooth shaft end without holding...
