Schneider Electric BMH0702P11F1A Motor 70Mm Iec 2,5Nm Ip54 1160W Key
SKU:
BMH0702P11F1A
UPC:
3.60649E+12
MPN:
Condition:
New
Range Compatibility:
Lexium 32
Ip Degree Of Protection:
IP54 standard
Phase:
three phase
Mounting Holes Diameter:
5.5 mm
Rohs Exemption Information:
Yes
Sustainable Offer Status:
Green Premium product
[Us] Rated Supply Voltage:
480 V
Nominal Output Power:
700 W LXM32.D12N4 3 A, 400 V, three phase || 700 W LXM32.D12N4 3 A, 480 V, three phase
Stator Inductance:
12.2 mH 20 °C
Number Of Motor Poles:
10
China Rohs Regulation:
X
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Rotor Inertia:
1.24 kg.cm²
Maximum Axial Force Fa:
0.2 x Fr
Back Emf Constant:
54.08 V/krpm 120 °C
Type Of Cooling:
natural convection
Product Compatibility:
LXM32.D12N4 400...480 V three phase
Maximum Permanent Current:
9.68 A
Feedback Type:
single turn SinCos Hiperface
Circle Diameter Of The Mounting Holes:
82 mm
Net Weight:
3.3 kg
Centring Collar Depth:
2.5 mm
Brake Pull-In Power:
7 W
Key Width:
18 mm
Nominal Torque:
2.2 N.m LXM32.D12N4 3 A, 400 V, three phase || 2.2 N.m LXM32.D12N4 3 A, 480 V, three phase
Maximum Radial Force Fr:
710 N 1000 rpm || 560 N 2000 rpm || 490 N 3000 rpm || 450 N 4000 rpm || 410 N 5000 rpm || 390 N 6000 rpm
Nominal Speed:
3000 rpm LXM32.D12N4 3 A, 400 V, three phase || 3000 rpm LXM32.D12N4 3 A, 480 V, three phase
Environmental Disclosure:
ENVPEP111002EN
Shaft Diameter:
11 mm
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Holding Brake:
with
Centring Collar Diameter:
60 mm
Stator Electrical Time Constant:
3.2 ms 20 °C
Second Shaft:
without second shaft end
Device Short Name:
BMH
Motor Flange Size:
70 mm
Number Of Motor Stacks:
2
Peak Stall Torque:
7.4 N.m LXM32.D12N4 3 A, 400 V, three phase || 7.4 N.m LXM32.D12N4 3 A, 480 V, three phase
Mounting Support:
international standard flange
Speed Feedback Resolution:
131072 points/turn
Maximum Current Irms:
9.7 A LXM32.D12N4
Holding Torque:
3 N.m holding brake
Continuous Power:
1.51 W
Maximum Mechanical Speed:
8000 rpm
Continuous Stall Current:
2.94 A
Torque Constant:
0.84 N.m/A 120 °C
Length:
193 mm
Mercury Free:
Yes
Product Or Component Type:
servo motor
Stator Resistance:
3.8 Ohm 20 °C
Warranty:
18 months
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Continuous Stall Torque:
2.5 N.m LXM32.D12N4 3 A, 400 V, three phase || 2.5 N.m LXM32.D12N4 3 A, 480 V, three phase
This product is part of the Lexium 32 range, an offer of servo motors from 0.15kW to 11kW. The 10-pole servo motor features maximum mechanical speed of 8000RPM and keyed shaft end without holding...
