Schneider Electric BMH0702T07F2A Motor 70Mm Iec 2,5Nm Ip54 1080W No Key
SKU:
BMH0702T07F2A
UPC:
3.60649E+12
MPN:
Condition:
New
Mounting Support:
international standard flange
Mercury Free:
Yes
Pvc Free:
Yes
Stator Inductance:
3.6 mH 20 °C
Continuous Stall Torque:
2.5 N.m LXM32.D30M2 10 A, 115 V, single phase || 2.5 N.m LXM32.D18M2 6 A, 230 V, single phase
Centring Collar Diameter:
60 mm
Peak Stall Torque:
6.4 N.m LXM32.D30M2 10 A, 115 V, single phase || 7.4 N.m LXM32.D18M2 6 A, 230 V, single phase
Nominal Speed:
2500 rpm LXM32.D30M2 10 A, 115 V, single phase || 4000 rpm LXM32.D18M2 6 A, 230 V, single phase
Second Shaft:
without second shaft end
Warranty:
18 months
Product Compatibility:
LXM32.D30M2 115 V single phase || LXM32.D18M2 230 V single phase
Motor Flange Size:
70 mm
Shaft Length:
23 mm
Continuous Stall Current:
5.38 A
Circularity Profile:
N/A
Number Of Motor Stacks:
2
Device Short Name:
BMH
Rohs Exemption Information:
Yes
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Nominal Output Power:
600 W LXM32.D30M2 10 A, 115 V, single phase || 900 W LXM32.D18M2 6 A, 230 V, single phase
Maximum Permanent Current:
17.71 A
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Speed Feedback Resolution:
32768 points/turn x 4096 turns
[Us] Rated Supply Voltage:
240 V
Back Emf Constant:
29.6 V/krpm 120 °C
Net Weight:
3.3 kg
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Feedback Type:
multiturn SinCos Hiperface
Holding Brake:
with
Mounting Holes Diameter:
5.5 mm
Nominal Torque:
2.3 N.m LXM32.D30M2 10 A, 115 V, single phase || 2.1 N.m LXM32.D18M2 6 A, 230 V, single phase
Range Compatibility:
Lexium 32
Stator Electrical Time Constant:
3.1 ms 20 °C
Centring Collar Depth:
2.5 mm
Shaft End:
smooth shaft
Continuous Power:
1.51 W
Stator Resistance:
1.15 Ohm 20 °C
Length:
193 mm
China Rohs Regulation:
X
Product Or Component Type:
servo motor
Type Of Cooling:
natural convection
Rotor Inertia:
1.24 kg.cm²
Sustainable Offer Status:
Green Premium product
Holding Torque:
3 N.m holding brake
Brake Pull-In Power:
7 W
Number Of Mounting Holes:
4
Maximum Axial Force Fa:
0.2 x Fr
Circle Diameter Of The Mounting Holes:
82 mm
Torque Constant:
0.46 N.m/A 120 °C
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Number Of Motor Poles:
10
Shaft Diameter:
11 mm
Phase:
three phase
Maximum Current Irms:
15 A LXM32.D30M2 || 17.5 A LXM32.D18M2
Maximum Mechanical Speed:
8000 rpm
Environmental Disclosure:
ENVPEP111002EN
Maximum Radial Force Fr:
710 N 1000 rpm || 560 N 2000 rpm || 490 N 3000 rpm || 450 N 4000 rpm || 410 N 5000 rpm || 390 N 6000 rpm
