Schneider Electric BMH0702T26A1A Motor 70Mm Iec 2,5Nm Ip65/67 1080W No
SKU:
BMH0702T26A1A
UPC:
3606485194646
MPN:
Condition:
New
Circle Diameter Of The Mounting Holes:
82 mm
Device Short Name:
BMH
Net Weight:
2.3 kg
Maximum Mechanical Speed:
8000 rpm
Length:
154 mm
Holding Brake:
without
Continuous Stall Current:
5.38 A
Environmental Disclosure:
ENVPEP111002EN
Shaft End:
smooth shaft
Maximum Axial Force Fa:
0.2 x Fr
Nominal Speed:
2500 rpm LXM32.D30M2 10 A, 115 V, single phase || 4000 rpm LXM32.D18M2 6 A, 230 V, single phase
Circularity Profile:
N/A
Centring Collar Diameter:
60 mm
Second Shaft:
without second shaft end
Product Compatibility:
LXM32.D30M2 115 V single phase || LXM32.D18M2 230 V single phase
Torque Constant:
0.46 N.m/A 120 °C
Motor Flange Size:
70 mm
Mercury Free:
Yes
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Peak Stall Torque:
6.4 N.m LXM32.D30M2 10 A, 115 V, single phase || 7.4 N.m LXM32.D18M2 6 A, 230 V, single phase
Feedback Type:
single turn SinCos Hiperface
Maximum Permanent Current:
17.71 A
Stator Electrical Time Constant:
3.1 ms 20 °C
Electrical Connection:
straight connectors
Range Compatibility:
Lexium 32
Centring Collar Depth:
2.5 mm
Pvc Free:
Yes
Ip Degree Of Protection:
IP65 standard || IP67 with IP67 kit
Number Of Motor Stacks:
2
Rohs Exemption Information:
Yes
Maximum Radial Force Fr:
710 N 1000 rpm || 560 N 2000 rpm || 490 N 3000 rpm || 450 N 4000 rpm || 410 N 5000 rpm || 390 N 6000 rpm
Mounting Support:
international standard flange
[Us] Rated Supply Voltage:
240 V
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Nominal Torque:
2.3 N.m LXM32.D30M2 10 A, 115 V, single phase || 2.1 N.m LXM32.D18M2 6 A, 230 V, single phase
Sustainable Offer Status:
Green Premium product
Continuous Power:
1.51 W
Product Or Component Type:
servo motor
Continuous Stall Torque:
2.5 N.m LXM32.D30M2 10 A, 115 V, single phase || 2.5 N.m LXM32.D18M2 6 A, 230 V, single phase
Back Emf Constant:
29.6 V/krpm 120 °C
Maximum Current Irms:
15 A LXM32.D30M2 || 17.5 A LXM32.D18M2
Stator Resistance:
1.15 Ohm 20 °C
Rotor Inertia:
1.13 kg.cm²
Stator Inductance:
3.6 mH 20 °C
Speed Feedback Resolution:
32768 points/turn
Shaft Diameter:
11 mm
China Rohs Regulation:
X
Type Of Cooling:
natural convection
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Nominal Output Power:
600 W LXM32.D30M2 10 A, 115 V, single phase || 900 W LXM32.D18M2 6 A, 230 V, single phase
Mounting Holes Diameter:
5.5 mm
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
