Schneider Electric BMH0702T27A2A Motor 70Mm Iec 2,5Nm Ip65/67 1080W No
SKU:
BMH0702T27A2A
UPC:
3606485194875
MPN:
Condition:
New
[Us] Rated Supply Voltage:
240 V
Pvc Free:
Yes
Circularity Profile:
N/A
Stator Inductance:
3.6 mH 20 °C
Mercury Free:
Yes
Rohs Exemption Information:
Yes
Device Short Name:
BMH
Maximum Current Irms:
15 A LXM32.D30M2 || 17.5 A LXM32.D18M2
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Back Emf Constant:
29.6 V/krpm 120 °C
Shaft Length:
23 mm
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Range Compatibility:
Lexium 32
Electrical Connection:
rotatable right-angled connectors
Maximum Permanent Current:
17.71 A
Nominal Output Power:
600 W LXM32.D30M2 10 A, 115 V, single phase || 900 W LXM32.D18M2 6 A, 230 V, single phase
Length:
154 mm
Net Weight:
2.3 kg
Torque Constant:
0.46 N.m/A 120 °C
Warranty:
18 months
Maximum Radial Force Fr:
710 N 1000 rpm || 560 N 2000 rpm || 490 N 3000 rpm || 450 N 4000 rpm || 410 N 5000 rpm || 390 N 6000 rpm
Product Compatibility:
LXM32.D30M2 115 V single phase || LXM32.D18M2 230 V single phase
Number Of Motor Stacks:
2
Continuous Power:
1.51 W
Nominal Torque:
2.3 N.m LXM32.D30M2 10 A, 115 V, single phase || 2.1 N.m LXM32.D18M2 6 A, 230 V, single phase
Feedback Type:
multiturn SinCos Hiperface
Phase:
three phase
Product Or Component Type:
servo motor
Maximum Mechanical Speed:
8000 rpm
Maximum Axial Force Fa:
0.2 x Fr
Speed Feedback Resolution:
32768 points/turn x 4096 turns
Centring Collar Depth:
2.5 mm
Shaft Diameter:
11 mm
Rotor Inertia:
1.13 kg.cm²
Motor Flange Size:
70 mm
Sustainable Offer Status:
Green Premium product
Nominal Speed:
2500 rpm LXM32.D30M2 10 A, 115 V, single phase || 4000 rpm LXM32.D18M2 6 A, 230 V, single phase
Peak Stall Torque:
6.4 N.m LXM32.D30M2 10 A, 115 V, single phase || 7.4 N.m LXM32.D18M2 6 A, 230 V, single phase
Mounting Holes Diameter:
5.5 mm
Environmental Disclosure:
ENVPEP111002EN
Centring Collar Diameter:
60 mm
Stator Resistance:
1.15 Ohm 20 °C
Continuous Stall Current:
5.38 A
Shaft End:
smooth shaft
Continuous Stall Torque:
2.5 N.m LXM32.D30M2 10 A, 115 V, single phase || 2.5 N.m LXM32.D18M2 6 A, 230 V, single phase
Second Shaft:
without second shaft end
Number Of Mounting Holes:
4
Ip Degree Of Protection:
IP65 standard || IP67 with IP67 kit
Holding Brake:
without
Number Of Motor Poles:
10
Circle Diameter Of The Mounting Holes:
82 mm
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
