Schneider Electric BMH0702T31F2A Motor 70Mm Iec 2,5Nm Ip65/67 1080W Key
SKU:
BMH0702T31F2A
UPC:
3.60649E+12
MPN:
Condition:
New
Shaft Diameter:
11 mm
Maximum Axial Force Fa:
0.2 x Fr
Shaft End:
keyed
Motor Flange Size:
70 mm
Pvc Free:
Yes
Back Emf Constant:
29.6 V/krpm 120 °C
Holding Brake:
with
Rohs Exemption Information:
Yes
Warranty:
18 months
Sustainable Offer Status:
Green Premium product
Maximum Radial Force Fr:
710 N 1000 rpm || 560 N 2000 rpm || 490 N 3000 rpm || 450 N 4000 rpm || 410 N 5000 rpm || 390 N 6000 rpm
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Product Or Component Type:
servo motor
Stator Inductance:
3.6 mH 20 °C
Type Of Cooling:
natural convection
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Stator Electrical Time Constant:
3.1 ms 20 °C
Maximum Mechanical Speed:
8000 rpm
Environmental Disclosure:
ENVPEP111002EN
Ip Degree Of Protection:
IP65 standard || IP67 with IP67 kit
Electrical Connection:
rotatable right-angled connectors
Number Of Motor Stacks:
2
Circularity Profile:
N/A
Nominal Torque:
2.3 N.m LXM32.D30M2 10 A, 115 V, single phase || 2.1 N.m LXM32.D18M2 6 A, 230 V, single phase
Stator Resistance:
1.15 Ohm 20 °C
Length:
193 mm
Mounting Support:
international standard flange
Peak Stall Torque:
6.4 N.m LXM32.D30M2 10 A, 115 V, single phase || 7.4 N.m LXM32.D18M2 6 A, 230 V, single phase
Torque Constant:
0.46 N.m/A 120 °C
Nominal Speed:
2500 rpm LXM32.D30M2 10 A, 115 V, single phase || 4000 rpm LXM32.D18M2 6 A, 230 V, single phase
Second Shaft:
without second shaft end
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Range Compatibility:
Lexium 32
Holding Torque:
3 N.m holding brake
Circle Diameter Of The Mounting Holes:
82 mm
China Rohs Regulation:
X
Key Width:
18 mm
Rotor Inertia:
1.24 kg.cm²
Maximum Current Irms:
15 A LXM32.D30M2 || 17.5 A LXM32.D18M2
Mercury Free:
Yes
Phase:
three phase
Feedback Type:
single turn SinCos Hiperface
Continuous Stall Torque:
2.5 N.m LXM32.D30M2 10 A, 115 V, single phase || 2.5 N.m LXM32.D18M2 6 A, 230 V, single phase
Centring Collar Diameter:
60 mm
Brake Pull-In Power:
7 W
Product Compatibility:
LXM32.D30M2 115 V single phase || LXM32.D18M2 230 V single phase
Centring Collar Depth:
2.5 mm
Continuous Power:
1.51 W
Speed Feedback Resolution:
131072 points/turn
Continuous Stall Current:
5.38 A
[Us] Rated Supply Voltage:
240 V
Net Weight:
3.3 kg
Shaft Length:
23 mm
Mounting Holes Diameter:
5.5 mm
Nominal Output Power:
600 W LXM32.D30M2 10 A, 115 V, single phase || 900 W LXM32.D18M2 6 A, 230 V, single phase
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
