Schneider Electric BMH0702T32A2A Motor 70Mm Iec 2,5Nm Ip65/67 1160W Key
SKU:
BMH0702T32A2A
UPC:
3606485194578
MPN:
Condition:
New
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Sustainable Offer Status:
Green Premium product
Electrical Connection:
rotatable right-angled connectors
Feedback Type:
multiturn SinCos Hiperface
Number Of Motor Poles:
10
Maximum Axial Force Fa:
0.2 x Fr
Torque Constant:
0.46 N.m/A 120 °C
Centring Collar Diameter:
60 mm
Centring Collar Depth:
2.5 mm
Product Compatibility:
LXM32.D30M2 115 V single phase || LXM32.D18M2 230 V single phase
Continuous Power:
1.51 W
[Us] Rated Supply Voltage:
240 V
Motor Flange Size:
70 mm
Pvc Free:
Yes
Length:
154 mm
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Maximum Mechanical Speed:
8000 rpm
Nominal Torque:
2.3 N.m LXM32.D30M2 10 A, 115 V, single phase || 2.1 N.m LXM32.D18M2 6 A, 230 V, single phase
Product Or Component Type:
servo motor
Stator Resistance:
1.15 Ohm 20 °C
Shaft Length:
23 mm
Mounting Holes Diameter:
5.5 mm
Speed Feedback Resolution:
131072 points/turn x 4096 turns
Maximum Current Irms:
15 A LXM32.D30M2 || 17.5 A LXM32.D18M2
Peak Stall Torque:
6.4 N.m LXM32.D30M2 10 A, 115 V, single phase || 7.4 N.m LXM32.D18M2 6 A, 230 V, single phase
Back Emf Constant:
29.6 V/krpm 120 °C
Continuous Stall Current:
5.38 A
Number Of Mounting Holes:
4
Ip Degree Of Protection:
IP65 standard || IP67 with IP67 kit
Mercury Free:
Yes
Type Of Cooling:
natural convection
Maximum Permanent Current:
17.71 A
Maximum Radial Force Fr:
710 N 1000 rpm || 560 N 2000 rpm || 490 N 3000 rpm || 450 N 4000 rpm || 410 N 5000 rpm || 390 N 6000 rpm
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Second Shaft:
without second shaft end
Circularity Profile:
N/A
Shaft Diameter:
11 mm
Shaft End:
keyed
Holding Brake:
without
China Rohs Regulation:
X
Range Compatibility:
Lexium 32
Nominal Output Power:
600 W LXM32.D30M2 10 A, 115 V, single phase || 900 W LXM32.D18M2 6 A, 230 V, single phase
Stator Inductance:
3.6 mH 20 °C
Rotor Inertia:
1.13 kg.cm²
Key Width:
18 mm
Device Short Name:
BMH
Rohs Exemption Information:
Yes
Mounting Support:
international standard flange
Phase:
three phase
Net Weight:
2.3 kg
Environmental Disclosure:
ENVPEP111002EN
Number Of Motor Stacks:
2
Warranty:
18 months
Circle Diameter Of The Mounting Holes:
82 mm
Continuous Stall Torque:
2.5 N.m LXM32.D30M2 10 A, 115 V, single phase || 2.5 N.m LXM32.D18M2 6 A, 230 V, single phase
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Stator Electrical Time Constant:
3.1 ms 20 °C
Nominal Speed:
2500 rpm LXM32.D30M2 10 A, 115 V, single phase || 4000 rpm LXM32.D18M2 6 A, 230 V, single phase
This product is part of the Lexium 32 range, an offer of servo motors from 0.15kW to 11kW. The 10-pole servo motor features maximum mechanical speed of 8000RPM and smooth shaft end without holding...
