Schneider Electric BMH0703P27A2A Motor 70Mm Iec 3,4Nm Ip65/67 1320W No
SKU:
BMH0703P27A2A
UPC:
3.60649E+12
MPN:
Condition:
New
Circle Diameter Of The Mounting Holes:
82 mm
Warranty:
18 months
Number Of Motor Stacks:
3
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Pvc Free:
Yes
Length:
186 mm
Continuous Stall Current:
3.91 A
Maximum Mechanical Speed:
8000 rpm
Shaft Diameter:
14 mm
Back Emf Constant:
55.8 V/krpm 120 °C
Stator Inductance:
8.6 mH 20 °C
Circularity Profile:
N/A
Continuous Stall Torque:
3.4 N.m LXM32.D18N4 6 A, 400 V, three phase || 3.4 N.m LXM32.D18N4 6 A, 480 V, three phase
Shaft Length:
30 mm
Mounting Support:
international standard flange
Shaft End:
smooth shaft
Stator Electrical Time Constant:
3.2 ms 20 °C
Nominal Output Power:
1300 W LXM32.D18N4 6 A, 400 V, three phase || 1300 W LXM32.D18N4 6 A, 480 V, three phase
Type Of Cooling:
natural convection
Stator Resistance:
2.65 Ohm 20 °C
Range Compatibility:
Lexium 32
Device Short Name:
BMH
Number Of Motor Poles:
10
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Product Compatibility:
LXM32.D18N4 400...480 V three phase
Torque Constant:
0.87 N.m/A 120 °C
Number Of Mounting Holes:
4
Centring Collar Depth:
2.5 mm
Rohs Exemption Information:
Yes
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Maximum Current Irms:
12.6 A LXM32.D18N4
Centring Collar Diameter:
60 mm
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Electrical Connection:
rotatable right-angled connectors
Maximum Permanent Current:
12.57 A
Environmental Disclosure:
ENVPEP111002EN
Phase:
three phase
Speed Feedback Resolution:
32768 points/turn x 4096 turns
Peak Stall Torque:
10.2 N.m LXM32.D18N4 6 A, 400 V, three phase || 10.2 N.m LXM32.D18N4 6 A, 480 V, three phase
Rotor Inertia:
1.67 kg.cm²
Holding Brake:
without
Feedback Type:
multiturn SinCos Hiperface
China Rohs Regulation:
X
Maximum Radial Force Fr:
730 N 1000 rpm || 580 N 2000 rpm || 510 N 3000 rpm || 460 N 4000 rpm || 430 N 5000 rpm || 400 N 6000 rpm
Nominal Torque:
2.4 N.m LXM32.D18N4 6 A, 400 V, three phase || 2.4 N.m LXM32.D18N4 6 A, 480 V, three phase
Second Shaft:
without second shaft end
Maximum Axial Force Fa:
0.2 x Fr
Nominal Speed:
5000 rpm LXM32.D18N4 6 A, 400 V, three phase || 5000 rpm LXM32.D18N4 6 A, 480 V, three phase
