Schneider Electric BMH0703P32A1A Motor 70Mm Iec 3,4Nm Ip65/67 1320W Key
SKU:
BMH0703P32A1A
UPC:
3606485199221
MPN:
Condition:
New
Ip Degree Of Protection:
IP65 standard || IP67 with IP67 kit
Peak Stall Torque:
10.2 N.m LXM32.D18N4 6 A, 400 V, three phase || 10.2 N.m LXM32.D18N4 6 A, 480 V, three phase
Stator Resistance:
2.65 Ohm 20 °C
Warranty:
18 months
Number Of Motor Stacks:
3
Mounting Support:
international standard flange
Net Weight:
3 kg
Product Or Component Type:
servo motor
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Circle Diameter Of The Mounting Holes:
82 mm
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Stator Inductance:
8.6 mH 20 °C
Number Of Mounting Holes:
4
Nominal Speed:
5000 rpm LXM32.D18N4 6 A, 400 V, three phase || 5000 rpm LXM32.D18N4 6 A, 480 V, three phase
Pvc Free:
Yes
Rohs Exemption Information:
Yes
Back Emf Constant:
55.8 V/krpm 120 °C
Shaft Length:
30 mm
Phase:
three phase
Mounting Holes Diameter:
5.5 mm
Number Of Motor Poles:
10
Holding Brake:
without
Continuous Stall Torque:
3.4 N.m LXM32.D18N4 6 A, 400 V, three phase || 3.4 N.m LXM32.D18N4 6 A, 480 V, three phase
Key Width:
20 mm
Electrical Connection:
straight connectors
Shaft End:
keyed
Speed Feedback Resolution:
131072 points/turn x 4096 turns
[Us] Rated Supply Voltage:
480 V
Second Shaft:
without second shaft end
Nominal Torque:
2.4 N.m LXM32.D18N4 6 A, 400 V, three phase || 2.4 N.m LXM32.D18N4 6 A, 480 V, three phase
Mercury Free:
Yes
Maximum Permanent Current:
12.57 A
Circularity Profile:
N/A
Maximum Axial Force Fa:
0.2 x Fr
Nominal Output Power:
1300 W LXM32.D18N4 6 A, 400 V, three phase || 1300 W LXM32.D18N4 6 A, 480 V, three phase
Device Short Name:
BMH
Stator Electrical Time Constant:
3.2 ms 20 °C
Continuous Power:
1.68 W
Sustainable Offer Status:
Green Premium product
Environmental Disclosure:
ENVPEP111002EN
Shaft Diameter:
14 mm
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Torque Constant:
0.87 N.m/A 120 °C
Feedback Type:
multiturn SinCos Hiperface
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Product Compatibility:
LXM32.D18N4 400...480 V three phase
Motor Flange Size:
70 mm
Continuous Stall Current:
3.91 A
Maximum Radial Force Fr:
730 N 1000 rpm || 580 N 2000 rpm || 510 N 3000 rpm || 460 N 4000 rpm || 430 N 5000 rpm || 400 N 6000 rpm
