Schneider Electric BMH0703P37A2A Motor 70Mm Iec 3,4Nm Ip65/67 1320W Key
SKU:
BMH0703P37A2A
UPC:
3606485199627
MPN:
Condition:
New
Sustainable Offer Status:
Green Premium product
Type Of Cooling:
natural convection
Maximum Permanent Current:
12.57 A
Nominal Speed:
5000 rpm LXM32.D18N4 6 A, 400 V, three phase || 5000 rpm LXM32.D18N4 6 A, 480 V, three phase
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Product Compatibility:
LXM32.D18N4 400...480 V three phase
Torque Constant:
0.87 N.m/A 120 °C
Range Compatibility:
Lexium 32
Environmental Disclosure:
ENVPEP111002EN
China Rohs Regulation:
X
Speed Feedback Resolution:
32768 points/turn x 4096 turns
Mounting Holes Diameter:
5.5 mm
Rotor Inertia:
1.67 kg.cm²
Number Of Motor Poles:
10
Key Width:
20 mm
Shaft Diameter:
14 mm
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Maximum Axial Force Fa:
0.2 x Fr
Stator Inductance:
8.6 mH 20 °C
Centring Collar Depth:
2.5 mm
Continuous Power:
1.68 W
Ip Degree Of Protection:
IP65 standard || IP67 with IP67 kit
Centring Collar Diameter:
60 mm
Rohs Exemption Information:
Yes
Net Weight:
3 kg
Stator Resistance:
2.65 Ohm 20 °C
Nominal Torque:
2.4 N.m LXM32.D18N4 6 A, 400 V, three phase || 2.4 N.m LXM32.D18N4 6 A, 480 V, three phase
Product Or Component Type:
servo motor
Holding Brake:
without
Maximum Mechanical Speed:
8000 rpm
Circle Diameter Of The Mounting Holes:
82 mm
Nominal Output Power:
1300 W LXM32.D18N4 6 A, 400 V, three phase || 1300 W LXM32.D18N4 6 A, 480 V, three phase
Phase:
three phase
[Us] Rated Supply Voltage:
480 V
Maximum Current Irms:
12.6 A LXM32.D18N4
Device Short Name:
BMH
Mounting Support:
international standard flange
Continuous Stall Current:
3.91 A
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Number Of Mounting Holes:
4
Peak Stall Torque:
10.2 N.m LXM32.D18N4 6 A, 400 V, three phase || 10.2 N.m LXM32.D18N4 6 A, 480 V, three phase
Circularity Profile:
N/A
Second Shaft:
without second shaft end
Number Of Motor Stacks:
3
Length:
186 mm
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Pvc Free:
Yes
Shaft End:
keyed
Feedback Type:
multiturn SinCos Hiperface
Maximum Radial Force Fr:
730 N 1000 rpm || 580 N 2000 rpm || 510 N 3000 rpm || 460 N 4000 rpm || 430 N 5000 rpm || 400 N 6000 rpm
Stator Electrical Time Constant:
3.2 ms 20 °C
Warranty:
18 months
Shaft Length:
30 mm
Motor Flange Size:
70 mm
Continuous Stall Torque:
3.4 N.m LXM32.D18N4 6 A, 400 V, three phase || 3.4 N.m LXM32.D18N4 6 A, 480 V, three phase
