Schneider Electric BMH1001P16A1A Motor 100Mm Iec 3,6Nm Ip54 1260W Key
SKU:
BMH1001P16A1A
UPC:
3606485195575
MPN:
Condition:
New
[Us] Rated Supply Voltage:
480 V
Net Weight:
3.34 kg
Number Of Mounting Holes:
4
Continuous Stall Current:
3.15 A
Stator Electrical Time Constant:
4.5 ms 20 °C
Centring Collar Diameter:
95 mm
Mounting Support:
international standard flange
Back Emf Constant:
70.3 V/krpm 120 °C
Maximum Mechanical Speed:
6000 rpm
Environmental Disclosure:
ENVPEP111002EN
Continuous Stall Torque:
3.3 N.m LXM32.D12N4 3 A, 400 V, three phase || 3.3 N.m LXM32.D12N4 3 A, 480 V, three phase || 3.4 N.m LXM32.D18N4 6 A, 400 V, three phase || 3.4 N.m LXM32.D18N4 6 A, 480 V, three phase
Shaft End:
keyed
Mercury Free:
Yes
Product Compatibility:
LXM32.D12N4 400...480 V three phase || LXM32.D18N4 400...480 V three phase
Torque Constant:
1.1 N.m/A 120 °C
Warranty:
18 months
Maximum Permanent Current:
11.93 A
Motor Flange Size:
100 mm
Peak Stall Torque:
10.8 N.m LXM32.D12N4 3 A, 400 V, three phase || 10.8 N.m LXM32.D12N4 3 A, 480 V, three phase || 10.8 N.m LXM32.D18N4 6 A, 400 V, three phase || 10.8 N.m LXM32.D18N4 6 A, 480 V, three phase
Second Shaft:
without second shaft end
Holding Brake:
without
Nominal Torque:
1.9 N.m LXM32.D12N4 3 A, 400 V, three phase || 1.9 N.m LXM32.D12N4 3 A, 480 V, three phase || 3.1 N.m LXM32.D18N4 6 A, 400 V, three phase || 3.1 N.m LXM32.D18N4 6 A, 480 V, three phase
Key Width:
30 mm
Number Of Motor Poles:
10
Type Of Cooling:
natural convection
Range Compatibility:
Lexium 32
Pvc Free:
Yes
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Centring Collar Depth:
3.5 mm
Mounting Holes Diameter:
9 mm
Shaft Diameter:
19 mm
Maximum Current Irms:
11.9 A LXM32.D12N4 || 11.9 A LXM32.D18N4
Rotor Inertia:
3.19 kg.cm²
Device Short Name:
BMH
Product Or Component Type:
servo motor
Length:
128.6 mm
Speed Feedback Resolution:
32768 points/turn
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Stator Inductance:
13.9 mH 20 °C
Stator Resistance:
3.1 Ohm 20 °C
Ip Degree Of Protection:
IP54 standard
Circle Diameter Of The Mounting Holes:
115 mm
Number Of Motor Stacks:
1
Circularity Profile:
N/A
Shaft Length:
40 mm
Sustainable Offer Status:
Green Premium product
Maximum Radial Force Fr:
900 N 1000 rpm || 720 N 2000 rpm || 630 N 3000 rpm || 570 N 4000 rpm || 530 N 5000 rpm
Continuous Power:
1.76 W
Nominal Output Power:
800 W LXM32.D12N4 3 A, 400 V, three phase || 800 W LXM32.D12N4 3 A, 480 V, three phase || 1300 W LXM32.D18N4 6 A, 400 V, three phase || 1300 W LXM32.D18N4 6 A, 480 V, three phase
Rohs Exemption Information:
Yes
Phase:
three phase
Electrical Connection:
straight connectors
Maximum Axial Force Fa:
0.2 x Fr
China Rohs Regulation:
X
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Nominal Speed:
4000 rpm LXM32.D12N4 3 A, 400 V, three phase || 4000 rpm LXM32.D12N4 3 A, 480 V, three phase || 4000 rpm LXM32.D18N4 6 A, 400 V, three phase || 4000 rpm LXM32.D18N4 6 A, 480 V, three phase
This product is part of the Lexium 32 range, an offer of servo motors from 0.15kW to 11kW. The 10-pole servo motor features maximum mechanical speed of 6000RPM and keyed shaft end with holding brake...
This product is part of the Lexium 32 range, an offer of servo motors from 0.15kW to 11kW. The 10-pole servo motor features maximum mechanical speed of 6000RPM and keyed shaft end without holding...
This product is part of the Lexium 32 range, an offer of motion servo drives for machines from 0.15kW to 7kW. The 10-pole servo motor features a medium moment of inertia with maximum mechanical speed...
This product is part of the Lexium 32 range, an offer of servo motors from 0.15kW to 11kW. The 10-pole servo motor features maximum mechanical speed of 6000RPM and smooth shaft end without holding...