Schneider Electric BMH1001T12A2A Motor 100Mm Iec 3,4Nm Ip54 1350W Key
SKU:
BMH1001T12A2A
UPC:
3606485196916
MPN:
Condition:
New
Mounting Support:
international standard flange
Feedback Type:
multiturn SinCos Hiperface
Continuous Stall Current:
5.11 A
Shaft Diameter:
19 mm
Mounting Holes Diameter:
9 mm
Peak Stall Torque:
8.9 N.m LXM32.D30M2 10 A, 115 V, single phase || 10.2 N.m LXM32.D18M2 6 A, 230 V, single phase
Nominal Torque:
3.3 N.m LXM32.D30M2 10 A, 115 V, single phase || 2.8 N.m LXM32.D18M2 6 A, 230 V, single phase
Centring Collar Diameter:
95 mm
Motor Flange Size:
100 mm
Maximum Radial Force Fr:
900 N 1000 rpm || 720 N 2000 rpm || 630 N 3000 rpm || 570 N 4000 rpm || 530 N 5000 rpm
China Rohs Regulation:
X
Sustainable Offer Status:
Green Premium product
Nominal Speed:
2000 rpm LXM32.D30M2 10 A, 115 V, single phase || 3000 rpm LXM32.D18M2 6 A, 230 V, single phase
Back Emf Constant:
43.3 V/krpm 120 °C
Shaft End:
keyed
Number Of Motor Stacks:
1
Pvc Free:
Yes
Phase:
three phase
Maximum Permanent Current:
19.38 A
Torque Constant:
0.67 N.m/A 120 °C
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Nominal Output Power:
700 W LXM32.D30M2 10 A, 115 V, single phase || 900 W LXM32.D18M2 6 A, 230 V, single phase
Maximum Axial Force Fa:
0.2 x Fr
Environmental Disclosure:
ENVPEP111002EN
Continuous Power:
1.74 W
Ip Degree Of Protection:
IP54 standard
Warranty:
18 months
Holding Brake:
without
Stator Resistance:
1.19 Ohm 20 °C
Length:
128.6 mm
Shaft Length:
40 mm
Maximum Current Irms:
15 A LXM32.D30M2 || 19.4 A LXM32.D18M2
Speed Feedback Resolution:
131072 points/turn x 4096 turns
Stator Electrical Time Constant:
4.5 ms 20 °C
Rohs Exemption Information:
Yes
Circle Diameter Of The Mounting Holes:
115 mm
Second Shaft:
without second shaft end
Circularity Profile:
N/A
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Key Width:
30 mm
Continuous Stall Torque:
3.4 N.m LXM32.D30M2 10 A, 115 V, single phase || 3.4 N.m LXM32.D18M2 6 A, 230 V, single phase
Centring Collar Depth:
3.5 mm
Range Compatibility:
Lexium 32
Maximum Mechanical Speed:
6000 rpm
Product Or Component Type:
servo motor
Type Of Cooling:
natural convection
Device Short Name:
BMH
Number Of Mounting Holes:
4
Product Compatibility:
LXM32.D30M2 115 V single phase || LXM32.D18M2 230 V single phase
Rotor Inertia:
3.19 kg.cm²
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
