Schneider Electric BMH1001T12F2A Motor 100Mm Iec 3,4Nm Ip54 1350W Key
SKU:
BMH1001T12F2A
UPC:
3.60649E+12
MPN:
Condition:
New
Environmental Disclosure:
ENVPEP111002EN
Rotor Inertia:
3.68 kg.cm²
Brake Pull-In Power:
12 W
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Warranty:
18 months
Continuous Stall Current:
5.11 A
Ip Degree Of Protection:
IP54 standard
Type Of Cooling:
natural convection
Nominal Torque:
3.3 N.m LXM32.D30M2 10 A, 115 V, single phase || 2.8 N.m LXM32.D18M2 6 A, 230 V, single phase
Number Of Mounting Holes:
4
Key Width:
30 mm
Second Shaft:
without second shaft end
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Length:
170.3 mm
Torque Constant:
0.67 N.m/A 120 °C
Product Or Component Type:
servo motor
Shaft Length:
40 mm
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Maximum Current Irms:
15 A LXM32.D30M2 || 19.4 A LXM32.D18M2
Rohs Exemption Information:
Yes
Centring Collar Diameter:
95 mm
Centring Collar Depth:
3.5 mm
Number Of Motor Stacks:
1
Mounting Holes Diameter:
9 mm
Mounting Support:
international standard flange
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Peak Stall Torque:
8.9 N.m LXM32.D30M2 10 A, 115 V, single phase || 10.2 N.m LXM32.D18M2 6 A, 230 V, single phase
Maximum Radial Force Fr:
900 N 1000 rpm || 720 N 2000 rpm || 630 N 3000 rpm || 570 N 4000 rpm || 530 N 5000 rpm
Continuous Stall Torque:
3.4 N.m LXM32.D30M2 10 A, 115 V, single phase || 3.4 N.m LXM32.D18M2 6 A, 230 V, single phase
Net Weight:
4.8 kg
Shaft Diameter:
19 mm
Stator Resistance:
1.19 Ohm 20 °C
Stator Inductance:
5.3 mH 20 °C
Holding Brake:
with
Stator Electrical Time Constant:
4.5 ms 20 °C
Maximum Permanent Current:
19.38 A
Product Compatibility:
LXM32.D30M2 115 V single phase || LXM32.D18M2 230 V single phase
Number Of Motor Poles:
10
Shaft End:
keyed
China Rohs Regulation:
X
[Us] Rated Supply Voltage:
240 V
Feedback Type:
multiturn SinCos Hiperface
Pvc Free:
Yes
Circularity Profile:
N/A
Range Compatibility:
Lexium 32
Electrical Connection:
rotatable right-angled connectors
Maximum Axial Force Fa:
0.2 x Fr
Sustainable Offer Status:
Green Premium product
Back Emf Constant:
43.3 V/krpm 120 °C
Phase:
three phase
Device Short Name:
BMH
Mercury Free:
Yes
Maximum Mechanical Speed:
6000 rpm
Motor Flange Size:
100 mm
Nominal Speed:
2000 rpm LXM32.D30M2 10 A, 115 V, single phase || 3000 rpm LXM32.D18M2 6 A, 230 V, single phase
Nominal Output Power:
700 W LXM32.D30M2 10 A, 115 V, single phase || 900 W LXM32.D18M2 6 A, 230 V, single phase
