Schneider Electric BMH1001T17F2A Motor 100Mm Iec 3,4Nm Ip54 1350W Key
SKU:
BMH1001T17F2A
UPC:
3606485197265
MPN:
Condition:
New
Continuous Power:
1.74 W
Rohs Exemption Information:
Yes
Maximum Axial Force Fa:
0.2 x Fr
Pvc Free:
Yes
Mounting Support:
international standard flange
Maximum Permanent Current:
19.38 A
Continuous Stall Current:
5.11 A
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Centring Collar Depth:
3.5 mm
Number Of Motor Stacks:
1
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
[Us] Rated Supply Voltage:
240 V
Shaft Diameter:
19 mm
Stator Resistance:
1.19 Ohm 20 °C
Shaft Length:
40 mm
Stator Electrical Time Constant:
4.5 ms 20 °C
Number Of Motor Poles:
10
Mercury Free:
Yes
Back Emf Constant:
43.3 V/krpm 120 °C
Range Compatibility:
Lexium 32
Continuous Stall Torque:
3.4 N.m LXM32.D30M2 10 A, 115 V, single phase || 3.4 N.m LXM32.D18M2 6 A, 230 V, single phase
Torque Constant:
0.67 N.m/A 120 °C
Speed Feedback Resolution:
32768 points/turn x 4096 turns
Device Short Name:
BMH
Maximum Mechanical Speed:
6000 rpm
Length:
170.3 mm
Mounting Holes Diameter:
9 mm
Product Or Component Type:
servo motor
Key Width:
30 mm
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Centring Collar Diameter:
95 mm
Shaft End:
keyed
Feedback Type:
multiturn SinCos Hiperface
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Maximum Current Irms:
15 A LXM32.D30M2 || 19.4 A LXM32.D18M2
Holding Brake:
with
Motor Flange Size:
100 mm
Second Shaft:
without second shaft end
Number Of Mounting Holes:
4
Type Of Cooling:
natural convection
Circularity Profile:
N/A
Maximum Radial Force Fr:
900 N 1000 rpm || 720 N 2000 rpm || 630 N 3000 rpm || 570 N 4000 rpm || 530 N 5000 rpm
Brake Pull-In Power:
12 W
China Rohs Regulation:
X
Ip Degree Of Protection:
IP54 standard
Holding Torque:
5.5 N.m holding brake
Stator Inductance:
5.3 mH 20 °C
Circle Diameter Of The Mounting Holes:
115 mm
Environmental Disclosure:
ENVPEP111002EN
Rotor Inertia:
3.68 kg.cm²
Nominal Speed:
2000 rpm LXM32.D30M2 10 A, 115 V, single phase || 3000 rpm LXM32.D18M2 6 A, 230 V, single phase
Net Weight:
4.8 kg
Nominal Torque:
3.3 N.m LXM32.D30M2 10 A, 115 V, single phase || 2.8 N.m LXM32.D18M2 6 A, 230 V, single phase
Peak Stall Torque:
8.9 N.m LXM32.D30M2 10 A, 115 V, single phase || 10.2 N.m LXM32.D18M2 6 A, 230 V, single phase
Sustainable Offer Status:
Green Premium product
Electrical Connection:
rotatable right-angled connectors
Product Compatibility:
LXM32.D30M2 115 V single phase || LXM32.D18M2 230 V single phase
Phase:
three phase
Warranty:
18 months
Nominal Output Power:
700 W LXM32.D30M2 10 A, 115 V, single phase || 900 W LXM32.D18M2 6 A, 230 V, single phase
