Schneider Electric BMH1001T37F2A Motor 100Mm Iec 3,6Nm Ip65/67 1350W Key
SKU:
BMH1001T37F2A
UPC:
3606485197289
MPN:
Condition:
New
Holding Torque:
5.5 N.m holding brake
Length:
170.3 mm
Brake Pull-In Power:
12 W
Environmental Disclosure:
ENVPEP111002EN
Number Of Mounting Holes:
4
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Nominal Output Power:
700 W LXM32.D30M2 10 A, 115 V, single phase || 900 W LXM32.D18M2 6 A, 230 V, single phase
Continuous Stall Current:
5.11 A
Maximum Permanent Current:
19.38 A
Maximum Radial Force Fr:
900 N 1000 rpm || 720 N 2000 rpm || 630 N 3000 rpm || 570 N 4000 rpm || 530 N 5000 rpm
Mounting Holes Diameter:
9 mm
Device Short Name:
BMH
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Torque Constant:
0.67 N.m/A 120 °C
Shaft Diameter:
19 mm
Centring Collar Depth:
3.5 mm
Warranty:
18 months
Number Of Motor Stacks:
1
Mercury Free:
Yes
Speed Feedback Resolution:
32768 points/turn x 4096 turns
Maximum Axial Force Fa:
0.2 x Fr
Nominal Speed:
2000 rpm LXM32.D30M2 10 A, 115 V, single phase || 3000 rpm LXM32.D18M2 6 A, 230 V, single phase
Shaft End:
keyed
Holding Brake:
with
Key Width:
30 mm
Product Or Component Type:
servo motor
Back Emf Constant:
43.3 V/krpm 120 °C
Ip Degree Of Protection:
IP65 standard || IP67 with IP67 kit
Stator Electrical Time Constant:
4.5 ms 20 °C
Maximum Current Irms:
15 A LXM32.D30M2 || 19.4 A LXM32.D18M2
Net Weight:
4.8 kg
Nominal Torque:
3.3 N.m LXM32.D30M2 10 A, 115 V, single phase || 2.8 N.m LXM32.D18M2 6 A, 230 V, single phase
Pvc Free:
Yes
Continuous Power:
1.74 W
Motor Flange Size:
100 mm
Stator Inductance:
5.3 mH 20 °C
Phase:
three phase
Second Shaft:
without second shaft end
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Sustainable Offer Status:
Green Premium product
Type Of Cooling:
natural convection
Maximum Mechanical Speed:
6000 rpm
Centring Collar Diameter:
95 mm
Electrical Connection:
rotatable right-angled connectors
[Us] Rated Supply Voltage:
240 V
Range Compatibility:
Lexium 32
Rotor Inertia:
3.68 kg.cm²
Circularity Profile:
N/A
Rohs Exemption Information:
Yes
Shaft Length:
40 mm
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Circle Diameter Of The Mounting Holes:
115 mm
Product Compatibility:
LXM32.D30M2 115 V single phase || LXM32.D18M2 230 V single phase
Feedback Type:
multiturn SinCos Hiperface
Mounting Support:
international standard flange
Peak Stall Torque:
8.9 N.m LXM32.D30M2 10 A, 115 V, single phase || 10.2 N.m LXM32.D18M2 6 A, 230 V, single phase
Number Of Motor Poles:
10
Continuous Stall Torque:
3.4 N.m LXM32.D30M2 10 A, 115 V, single phase || 3.4 N.m LXM32.D18M2 6 A, 230 V, single phase
