null
Schneider Electric BMH1002T06A2A Motor 100Mm Iec 6Nm Ip54 1910W No Key

Schneider Electric BMH1002T06A2A Motor 100Mm Iec 6Nm Ip54 1910W No Key

Schneider Electric
SKU:
BMH1002T06A2A
|
UPC:
3606480160813
$1,215.14
(No reviews yet) Write a Review
Condition:
New
Current Stock:
Description
This product is part of the Lexium 32 range, an offer of servo motors from 0.15kW to 11kW. The 10-pole servo motor features maximum mechanical speed of 6000RPM and smooth shaft end without holding brake. It is an equipped with a single-turn SinCos Hiperface® feedback with 32,768 points/turn speed feedback resolution. It is a servo motor with a rated supply voltage of 240V, a continuous stall current of 8.65A and a continuous power of 2.39W. The shaft dimensions are 19mm (diameter) x 40mm (length). It is furnished with rotatable right angled connectors for electrical connection. It is an IP54 rated product. The length of this product is 160.6mm and the centering collar dimensions are 3.5mm (depth) x 95mm (diameter) with 115mm mounting hole. It weighs 4.92kg. This range is compatible with Lexium 32 servo drives. This product is compatible with LXM32.D30M2 at 115V single phase and LXM32.D30M2 at 230V single phase. It supports 100mm international standard flange mount with a natural convection cooling system. Lexium 32 is a servo drive range provides drive and motor combination that has exactly the right power, performance and functionality. The Lexium 32 range of servo drives includes four servo drive models with power ratings from 0.15kW to 11kW and the servo motor ranges BMH and BSH series.
Additional Information
Length:
160.6 mm
Stator Resistance:
0.54 Ohm 20 °C
Type Of Cooling:
natural convection
Stator Inductance:
2.7 mH 20 °C
Shaft Length:
40 mm
Warranty:
18 months
Stator Electrical Time Constant:
5 ms 20 °C
Phase:
three phase
[Us] Rated Supply Voltage:
240 V
Rotor Inertia:
6.28 kg.cm²
Nominal Torque:
3.5 N.m LXM32.D30M2 10 A, 115 V, single phase || 4.6 N.m LXM32.D30M2 10 A, 230 V, single phase
Continuous Stall Current:
8.65 A
Peak Stall Torque:
10.3 N.m LXM32.D30M2 10 A, 115 V, single phase || 18.4 N.m LXM32.D30M2 10 A, 230 V, single phase
Shaft Diameter:
19 mm
Rohs Exemption Information:
Yes
Nominal Speed:
2000 rpm LXM32.D30M2 10 A, 115 V, single phase || 3000 rpm LXM32.D30M2 10 A, 230 V, single phase
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Product Compatibility:
LXM32.D30M2 115 V single phase || LXM32.D30M2 230 V single phase
Maximum Axial Force Fa:
0.2 x Fr
Number Of Mounting Holes:
4
Mounting Support:
international standard flange
Circularity Profile:
N/A
China Rohs Regulation:
X
Net Weight:
4.92 kg
Feedback Type:
single turn SinCos Hiperface
Nominal Output Power:
750 W LXM32.D30M2 10 A, 115 V, single phase || 1450 W LXM32.D30M2 10 A, 230 V, single phase
Circle Diameter Of The Mounting Holes:
115 mm
Electrical Connection:
rotatable right-angled connectors
Ip Degree Of Protection:
IP54 standard
Mercury Free:
Yes
Range Compatibility:
Lexium 32
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Centring Collar Depth:
3.5 mm
Speed Feedback Resolution:
32768 points/turn
Torque Constant:
0.72 N.m/A 120 °C
Device Short Name:
BMH
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Environmental Disclosure:
ENVPEP111002EN
Continuous Power:
2.39 W
Back Emf Constant:
46.2 V/krpm 120 °C
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Maximum Permanent Current:
30.24 A
Continuous Stall Torque:
6 N.m LXM32.D30M2 10 A, 115 V, single phase || 6 N.m LXM32.D30M2 10 A, 230 V, single phase
Maximum Current Irms:
15 A LXM32.D30M2 115 V || 30 A LXM32.D30M2 230 V
Product Or Component Type:
servo motor
Mounting Holes Diameter:
9 mm
Number Of Motor Stacks:
2
Sustainable Offer Status:
Green Premium product
Second Shaft:
without second shaft end
Maximum Radial Force Fr:
990 N 1000 rpm || 790 N 2000 rpm || 690 N 3000 rpm || 620 N 4000 rpm || 580 N 5000 rpm
Shaft End:
smooth shaft
Number Of Motor Poles:
10
Pvc Free:
Yes
Holding Brake:
without
Maximum Mechanical Speed:
6000 rpm
Centring Collar Diameter:
95 mm
Motor Flange Size:
100 mm
Datasheet:
View