Schneider Electric BMH1002T31F2A Motor 100Mm Iec 6Nm Ip65/67 1910W Key
SKU:
BMH1002T31F2A
UPC:
3606485200958
MPN:
Condition:
New
[Us] Rated Supply Voltage:
240 V
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Electrical Connection:
rotatable right-angled connectors
Device Short Name:
BMH
Nominal Output Power:
750 W LXM32.D30M2 10 A, 115 V, single phase || 1450 W LXM32.D30M2 10 A, 230 V, single phase
Product Or Component Type:
servo motor
Peak Stall Torque:
10.3 N.m LXM32.D30M2 10 A, 115 V, single phase || 18.4 N.m LXM32.D30M2 10 A, 230 V, single phase
Nominal Speed:
2000 rpm LXM32.D30M2 10 A, 115 V, single phase || 3000 rpm LXM32.D30M2 10 A, 230 V, single phase
Mounting Holes Diameter:
9 mm
Net Weight:
6.4 kg
Shaft Diameter:
19 mm
Rohs Exemption Information:
Yes
Warranty:
18 months
Second Shaft:
without second shaft end
Torque Constant:
0.72 N.m/A 120 °C
Rotor Inertia:
6.77 kg.cm²
Maximum Radial Force Fr:
990 N 1000 rpm || 790 N 2000 rpm || 690 N 3000 rpm || 620 N 4000 rpm || 580 N 5000 rpm
Feedback Type:
single turn SinCos Hiperface
Phase:
three phase
Product Compatibility:
LXM32.D30M2 115 V single phase || LXM32.D30M2 230 V single phase
Centring Collar Diameter:
95 mm
Centring Collar Depth:
3.5 mm
Continuous Stall Torque:
6 N.m LXM32.D30M2 10 A, 115 V, single phase || 6 N.m LXM32.D30M2 10 A, 230 V, single phase
Mounting Support:
international standard flange
Holding Brake:
with
Maximum Axial Force Fa:
0.2 x Fr
Speed Feedback Resolution:
131072 points/turn
Circularity Profile:
N/A
Number Of Motor Stacks:
2
Motor Flange Size:
100 mm
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Stator Resistance:
0.54 Ohm 20 °C
Pvc Free:
Yes
Range Compatibility:
Lexium 32
Mercury Free:
Yes
Stator Inductance:
2.7 mH 20 °C
Sustainable Offer Status:
Green Premium product
China Rohs Regulation:
X
Maximum Permanent Current:
30.24 A
Shaft Length:
40 mm
Brake Pull-In Power:
12 W
Circle Diameter Of The Mounting Holes:
115 mm
Shaft End:
keyed
Key Width:
30 mm
Length:
202.3 mm
Ip Degree Of Protection:
IP65 standard || IP67 with IP67 kit
Environmental Disclosure:
ENVPEP111002EN
Nominal Torque:
3.5 N.m LXM32.D30M2 10 A, 115 V, single phase || 4.6 N.m LXM32.D30M2 10 A, 230 V, single phase
Maximum Mechanical Speed:
6000 rpm
Maximum Current Irms:
15 A LXM32.D30M2 115 V || 30 A LXM32.D30M2 230 V
Holding Torque:
5.5 N.m holding brake
Number Of Motor Poles:
10
Continuous Stall Current:
8.65 A
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Type Of Cooling:
natural convection
Number Of Mounting Holes:
4
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
