Schneider Electric BMH1002T36F2A Motor 100Mm Iec 6,2Nm Ip65/67 1910W Key
SKU:
BMH1002T36F2A
UPC:
3.60649E+12
MPN:
Condition:
New
Environmental Disclosure:
ENVPEP111002EN
Type Of Cooling:
natural convection
Continuous Stall Torque:
6 N.m LXM32.D30M2 10 A, 115 V, single phase || 6 N.m LXM32.D30M2 10 A, 230 V, single phase
Feedback Type:
single turn SinCos Hiperface
Continuous Power:
2.39 W
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Stator Electrical Time Constant:
5 ms 20 °C
Maximum Axial Force Fa:
0.2 x Fr
China Rohs Regulation:
X
Product Compatibility:
LXM32.D30M2 115 V single phase || LXM32.D30M2 230 V single phase
Nominal Torque:
3.5 N.m LXM32.D30M2 10 A, 115 V, single phase || 4.6 N.m LXM32.D30M2 10 A, 230 V, single phase
Peak Stall Torque:
10.3 N.m LXM32.D30M2 10 A, 115 V, single phase || 18.4 N.m LXM32.D30M2 10 A, 230 V, single phase
Net Weight:
6.4 kg
Key Width:
30 mm
Range Compatibility:
Lexium 32
Ip Degree Of Protection:
IP65 standard || IP67 with IP67 kit
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Number Of Motor Stacks:
2
Holding Torque:
5.5 N.m holding brake
Sustainable Offer Status:
Green Premium product
Rohs Exemption Information:
Yes
Maximum Permanent Current:
30.24 A
Warranty:
18 months
[Us] Rated Supply Voltage:
240 V
Shaft Diameter:
19 mm
Centring Collar Depth:
3.5 mm
Electrical Connection:
rotatable right-angled connectors
Maximum Radial Force Fr:
990 N 1000 rpm || 790 N 2000 rpm || 690 N 3000 rpm || 620 N 4000 rpm || 580 N 5000 rpm
Holding Brake:
with
Motor Flange Size:
100 mm
Number Of Motor Poles:
10
Maximum Mechanical Speed:
6000 rpm
Number Of Mounting Holes:
4
Centring Collar Diameter:
95 mm
Stator Resistance:
0.54 Ohm 20 °C
Pvc Free:
Yes
Continuous Stall Current:
8.65 A
Device Short Name:
BMH
Nominal Output Power:
750 W LXM32.D30M2 10 A, 115 V, single phase || 1450 W LXM32.D30M2 10 A, 230 V, single phase
Mercury Free:
Yes
Nominal Speed:
2000 rpm LXM32.D30M2 10 A, 115 V, single phase || 3000 rpm LXM32.D30M2 10 A, 230 V, single phase
Back Emf Constant:
46.2 V/krpm 120 °C
Mounting Holes Diameter:
9 mm
Shaft End:
keyed
Mounting Support:
international standard flange
Product Or Component Type:
servo motor
Second Shaft:
without second shaft end
Speed Feedback Resolution:
32768 points/turn
Maximum Current Irms:
15 A LXM32.D30M2 115 V || 30 A LXM32.D30M2 230 V
Stator Inductance:
2.7 mH 20 °C
Circle Diameter Of The Mounting Holes:
115 mm
Shaft Length:
40 mm
Circularity Profile:
N/A
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Brake Pull-In Power:
12 W
Torque Constant:
0.72 N.m/A 120 °C
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
