Schneider Electric BMH1003P06A1A Motor 100Mm Iec 8,4Nm Ip54 2730W No Key
SKU:
BMH1003P06A1A
UPC:
3.60649E+12
MPN:
Condition:
New
Environmental Disclosure:
ENVPEP111002EN
Second Shaft:
without second shaft end
Stator Resistance:
0.63 Ohm 20 °C
Stator Electrical Time Constant:
6.3 ms 20 °C
Number Of Mounting Holes:
4
Shaft End:
smooth shaft
Back Emf Constant:
63.5 V/krpm 120 °C
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Shaft Diameter:
19 mm
Nominal Speed:
4000 rpm LXM32.D30N4 10 A, 400 V, three phase || 4000 rpm LXM32.D30N4 10 A, 480 V, three phase
Product Compatibility:
LXM32.D30N4 400...480 V three phase
Maximum Radial Force Fr:
1050 N 1000 rpm || 830 N 2000 rpm || 730 N 3000 rpm || 660 N 4000 rpm || 610 N 5000 rpm
Shaft Length:
40 mm
Length:
192.6 mm
Maximum Permanent Current:
29.1 A
Range Compatibility:
Lexium 32
Peak Stall Torque:
25.1 N.m LXM32.D30N4 10 A, 400 V, three phase || 25.1 N.m LXM32.D30N4 10 A, 480 V, three phase
Continuous Stall Current:
7.69 A
Phase:
three phase
Mounting Holes Diameter:
9 mm
Speed Feedback Resolution:
32768 points/turn
Continuous Power:
3.3 W
Mercury Free:
Yes
Feedback Type:
single turn SinCos Hiperface
Centring Collar Depth:
3.5 mm
Warranty:
18 months
Type Of Cooling:
natural convection
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Number Of Motor Stacks:
3
Rohs Exemption Information:
Yes
Stator Inductance:
4 mH 20 °C
China Rohs Regulation:
X
[Us] Rated Supply Voltage:
480 V
Nominal Torque:
6.2 N.m LXM32.D30N4 10 A, 400 V, three phase || 6.2 N.m LXM32.D30N4 10 A, 480 V, three phase
Number Of Motor Poles:
10
Pvc Free:
Yes
Continuous Stall Torque:
8.4 N.m LXM32.D30N4 10 A, 400 V, three phase || 8.4 N.m LXM32.D30N4 10 A, 480 V, three phase
Rotor Inertia:
9.37 kg.cm²
Product Or Component Type:
servo motor
Centring Collar Diameter:
95 mm
Mounting Support:
international standard flange
Maximum Current Irms:
29.1 A LXM32.D30N4
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Holding Brake:
without
Maximum Axial Force Fa:
0.2 x Fr
Nominal Output Power:
2700 W LXM32.D30N4 10 A, 400 V, three phase || 2700 W LXM32.D30N4 10 A, 480 V, three phase
This product is part of the Lexium 32 range, an offer of motion servo drives for machines from 0.15kW to 7kW. The 10-pole servo motor features a medium moment of inertia with maximum mechanical speed...
