Schneider Electric BMH1003T06A1A Motor 100Mm Iec 8,4Nm Ip54 2150W No Key
SKU:
BMH1003T06A1A
UPC:
3606485197920
MPN:
Condition:
New
Electrical Connection:
straight connectors
Product Or Component Type:
servo motor
Type Of Cooling:
natural convection
Peak Stall Torque:
22.8 N.m LXM32.D30M2 10 A, 230 V, single phase
Circularity Profile:
N/A
Nominal Torque:
5.6 N.m LXM32.D30M2 10 A, 230 V, single phase
Number Of Motor Stacks:
3
Nominal Speed:
2500 rpm LXM32.D30M2 10 A, 230 V, single phase
Device Short Name:
BMH
Centring Collar Depth:
3.5 mm
Second Shaft:
without second shaft end
Back Emf Constant:
54.8 V/krpm 120 °C
Mercury Free:
Yes
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Stator Resistance:
0.47 Ohm 20 °C
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Stator Electrical Time Constant:
6.4 ms 20 °C
Product Compatibility:
LXM32.D30M2 230 V single phase
Circle Diameter Of The Mounting Holes:
115 mm
Range Compatibility:
Lexium 32
Environmental Disclosure:
ENVPEP111002EN
Rohs Exemption Information:
Yes
Phase:
three phase
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
[Us] Rated Supply Voltage:
240 V
Centring Collar Diameter:
95 mm
Rotor Inertia:
9.37 kg.cm²
Number Of Motor Poles:
10
Maximum Permanent Current:
33.85 A
Stator Inductance:
3 mH 20 °C
Number Of Mounting Holes:
4
Continuous Stall Current:
0.416666666666667
China Rohs Regulation:
X
Pvc Free:
Yes
Feedback Type:
single turn SinCos Hiperface
Holding Brake:
without
Mounting Support:
international standard flange
Maximum Radial Force Fr:
1050 N 1000 rpm || 830 N 2000 rpm || 730 N 3000 rpm || 660 N 4000 rpm || 610 N 5000 rpm
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
